The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance must be supplied.
0 | GENERAL
0.1. | Make (trade name of manufacturer): …
0.2. | Type: …
0.2.1. | Commercial name(s) (if available): …
0.2.2.1. |
Allowed Parameter Values for multistage type approval to use the base vehicle emission, consumption and/or range values (insert range if applicable):
Final Vehicle actual mass (in kg): …
Final Vehicle technically permissible maximum laden mass (in kg): …
Frontal area for final vehicle (in cm2): …
Rolling resistance (kg/t): …
Cross-sectional area of air entrance of the front grille (in cm2): …
0.2.3. | Family identifiers:
0.2.3.1. | Interpolation family: …
0.2.3.2. | ATCT family(s): …
0.2.3.3. | PEMS family: …
0.2.3.4. | Roadload family
0.2.3.4.1. | Roadload family of VH: …
0.2.3.4.2. | Roadload family of VL: …
0.2.3.4.3. | Roadload families applicable in the interpolation family: …
0.2.3.5. | Roadload Matrix family(s): …
0.2.3.6. | Periodic regeneration family(s): …
0.2.3.7. | Evaporative test family(s): …
0.2.3.8. | OBD family(s): …
0.2.3.9. | Durability family(s): …
0.2.3.10. | ER family(s): …
0.2.3.11. | Gas Fuelled Vehicle family(s): …
0.2.3.12. | —
0.2.3.13. | KCO2 correction factor family: …
0.2.4. | other family(s): …
0.4. | Category of vehicle (c): …
0.5 | Name and address of the manufacturer
0.8. | Name(s) and address(es) of assembly plant(s): …
0.9. | Name and address of the manufacturer's representative (if any): …
1 | GENERAL CONSTRUCTION CHARACTERISTICS
1.1. | Photographs and/or drawings of a representative vehicle/component/separate technical unit (1):
1.3.3. | Powered axles (number, position, interconnection): …
2 |
MASSES AND DIMENSIONS (f) (g) (7)
(in kg and mm) (Refer to drawing where applicable)
2.6. |
Mass in running order (h)
maximum and minimum for each variant: …
2.6.3. | Rotational mass: 3 % of the sum of mass in running order and 25 kg or value, per axle (kg): …
2.8. | Technically permissible maximum laden mass stated by the manufacturer (i) (3): …
3 | PROPULSION ENERGY CONVERTER (k)
3.1. | Manufacturer of the propulsion energy converter(s): …
3.1.1. | Manufacturer's code (as marked on the propulsion energy converter or other means of identification): …
3.2. | Internal combustion engine
3.2.1.1. |
Working principle: positive ignition/compression ignition/dual fuel (1)
Cycle: four stroke/two stroke/rotary (1)
3.2.1.2. | Number and arrangement of cylinders: …
3.2.1.2.1. | Bore (1): … mm
3.2.1.2.2. | Stroke (1): … mm
3.2.1.2.3. | Firing order: …
3.2.1.3. | Engine capacity (m): … cm3
3.2.1.4. | Volumetric compression ratio (2): …
3.2.1.5. | Drawings of combustion chamber, piston crown and, in the case of positive ignition engines, piston rings: …
3.2.1.6. | Normal engine idling speed (2): … min–1
3.2.1.6.1. | High engine idling speed (2): … min–1
3.2.1.8. | Rated engine power (n): … kW at … min–1 (manufacturer's declared value)
3.2.1.9. | Maximum permitted engine speed as prescribed by the manufacturer: … min–1
3.2.1.10. | Maximum net torque (n): … Nm at … min–1 (manufacturer's declared value)
3.2.1.11. | The correction factor for compensating ambient conditions is set to 1, in accordance with paragraph 5.4.3 of Annex 5 to UN Regulation No 85: yes/no (1).
3.2.2. | Fuel
3.2.2.1. | Diesel/Petrol/LPG/NG or Biomethane/Ethanol (E 85)/Biodiesel/Hydrogen (1), (6)
3.2.2.1.1. | RON, unleaded: …
3.2.2.4. | Vehicle fuel type: Mono fuel, Bi fuel, Flex fuel (1)
3.2.2.5. | Maximum amount of biofuel acceptable in fuel (manufacturer's declared value): … % by volume
3.2.4. | Fuel feed
3.2.4.1. | By carburettor(s): yes/no (1)
3.2.4.2. | By fuel injection (compression ignition or dual fuel only): yes/no (1)
3.2.4.2.1. | System description (common rail/unit injectors/distribution pump etc.): …
3.2.4.2.2. | Working principle: direct injection/pre-chamber/swirl chamber (1)
3.2.4.2.3. | Injection/Delivery pump
3.2.4.2.3.1. | Make(s): …
3.2.4.2.3.2. | Type(s): …
3.2.4.2.3.3. | Maximum fuel delivery (1) (2): … mm3 /stroke or cycle at an engine speed of: … min–1 or, alternatively, a characteristic diagram: … (When boost control is supplied, state the characteristic fuel delivery and boost pressure versus engine speed)
3.2.4.2.4. | Engine speed limitation control
3.2.4.2.4.2.1. | Speed at which cut-off starts under load: … min–1
3.2.4.2.4.2.2. | Maximum no-load speed: … min–1
3.2.4.2.6. | Injector(s)
3.2.4.2.6.1. | Make(s): …
3.2.4.2.6.2. | Type(s): …
3.2.4.2.8. | Auxiliary starting aid
3.2.4.2.8.1. | Make(s): …
3.2.4.2.8.2. | Type(s): …
3.2.4.2.8.3. | System description: …
3.2.4.2.9. | Electronic controlled injection: yes/no (1)
3.2.4.2.9.1. | Make(s): …
3.2.4.2.9.2. | Type(s):
3.2.4.2.9.3 | Description of the system: …
3.2.4.2.9.3.1. | Make and type of the control unit (ECU): …
3.2.4.2.9.3.1.1. | Software version of the ECU: …
3.2.4.2.9.3.2. | Make and type of the fuel regulator: …
3.2.4.2.9.3.3. | Make and type of the air-flow sensor: …
3.2.4.2.9.3.4. | Make and type of fuel distributor: …
3.2.4.2.9.3.5. | Make and type of the throttle housing: …
3.2.4.2.9.3.6. | Make and type or working principle of water temperature sensor: …
3.2.4.2.9.3.7. | Make and type or working principle of air temperature sensor: …
3.2.4.2.9.3.8. | Make and type or working principle of air pressure sensor: …
3.2.4.3. | By fuel injection (positive ignition only): yes/no (1)
3.2.4.3.1. | Working principle: single-/multi-point/direct injection /other (specify) (1): …
3.2.4.3.2. | Make(s): …
3.2.4.3.3. | Type(s): …
3.2.4.3.4. | System description (In the case of systems other than continuous injection give equivalent details): …
3.2.4.3.4.1. | Make and type of the control unit (ECU): …
3.2.4.3.4.1.1. | Software version of the ECU: …
3.2.4.3.4.3. | Make and type or working principle of air-flow sensor: …
3.2.4.3.4.8. | Make and type of throttle housing: …
3.2.4.3.4.9. | Make and type or working principle of water temperature sensor: …
3.2.4.3.4.10. | Make and type or working principle of air temperature sensor: …
3.2.4.3.4.11. | Make and type or working principle of air pressure sensor: …
3.2.4.3.5. | Injectors
3.2.4.3.5.1. | Make: …
3.2.4.3.5.2. | Type: …
3.2.4.3.7. | Cold start system
3.2.4.3.7.1. | Operating principle(s): …
3.2.4.3.7.2. | Operating limits/settings (1) (2): …
3.2.4.4. | Feed pump
3.2.4.4.1. | Pressure (2): … kPa or characteristic diagram (2): …
3.2.4.4.2. | Make(s): …
3.2.4.4.3. | Type(s): …
3.2.5. | Electrical system
3.2.5.1. | Rated voltage: … V, positive/negative ground (1)
3.2.5.2. | Generator
3.2.5.2.1. | Type: …
3.2.5.2.2. | Nominal output: … VA
3.2.6. | Ignition system (spark ignition engines only)
3.2.6.1. | Make(s): …
3.2.6.2. | Type(s): …
3.2.6.3. | Working principle: …
3.2.6.6. | Spark plugs
3.2.6.6.1. | Make: …
3.2.6.6.2. | Type: …
3.2.6.6.3. | Gap setting: … mm
3.2.6.7. | Ignition coil(s)
3.2.6.7.1. | Make: …
3.2.6.7.2. | Type: …
3.2.7. | Cooling system: liquid/air (1)
3.2.7.1. | Nominal setting of the engine temperature control mechanism: …
3.2.7.2. | Liquid
3.2.7.2.1. | Nature of liquid: …
3.2.7.2.2. | Circulating pump(s): yes/no (1)
3.2.7.2.3. | Characteristics: … or
3.2.7.2.3.1. | Make(s): …
3.2.7.2.3.2. | Type(s): …
3.2.7.2.4. | Drive ratio(s): …
3.2.7.2.5. | Description of the fan and its drive mechanism: …
3.2.7.3. | Air
3.2.7.3.1. | Fan: yes/no (1)
3.2.7.3.2. | Characteristics: … or
3.2.7.3.2.1. | Make(s): …
3.2.7.3.2.2. | Type(s): …
3.2.7.3.3. | Drive ratio(s): …
3.2.8. | Intake system
3.2.8.1. | Pressure charger: yes/no (1)
3.2.8.1.1. | Make(s): …
3.2.8.1.2. | Type(s): …
3.2.8.1.3. | Description of the system (e.g. maximum charge pressure: … kPa; wastegate if applicable): …
3.2.8.2. | Intercooler: yes/no (1)
3.2.8.2.1. | Type: air-air/air-water (1)
3.2.8.3. | Intake depression at rated engine speed and at 100 % load (compression ignition engines only)
3.2.8.4. | Description and drawings of inlet pipes and their accessories (plenum chamber, heating device, additional air intakes, etc.): …
3.2.8.4.1. | Intake manifold description (include drawings and/or photos): …
3.2.8.4.2. | Air filter, drawings: … or
3.2.8.4.2.1. | Make(s): …
3.2.8.4.2.2. | Type(s): …
3.2.8.4.3. | Intake silencer, drawings: … or
3.2.8.4.3.1. | Make(s): …
3.2.8.4.3.2. | Type(s): …
3.2.9. | Exhaust system
3.2.9.1. | Description and/or drawing of the exhaust manifold: …
3.2.9.2. | Description and/or drawing of the exhaust system: …
3.2.9.3. | Maximum allowable exhaust back pressure at rated engine speed and at 100 % load (compression ignition engines only): … kPa
3.2.10. | Minimum cross-sectional areas of inlet and outlet ports: …
3.2.11. | Valve timing or equivalent data
3.2.11.1. | Maximum lift of valves, angles of opening and closing, or timing details of alternative distribution systems, in relation to dead centres. For variable timing system, minimum and maximum timing: …
3.2.11.2. | Reference and/or setting ranges (1): …
3.2.12. | Measures taken against air pollution
3.2.12.1. | Device for recycling crankcase gases (description and drawings): …
3.2.12.2. | Pollution control devices (if not covered by another heading)
3.2.12.2.1. | Catalytic converter
3.2.12.2.1.1. | Number of catalytic converters and elements (provide the information below for each separate unit): …
3.2.12.2.1.2. | Dimensions, shape and volume of the catalytic converter(s): …
3.2.12.2.1.3. | Type of catalytic action: …
3.2.12.2.1.4. | Total charge of precious metals: …
3.2.12.2.1.5. | Relative concentration: …
3.2.12.2.1.6. | Substrate (structure and material): …
3.2.12.2.1.7. | Cell density: …
3.2.12.2.1.8. | Type of casing for the catalytic converter(s): …
3.2.12.2.1.9. | Location of the catalytic converter(s) (place and reference distance in the exhaust line): …
3.2.12.2.1.10. | Heat shield: yes/no (1)
3.2.12.2.1.11. | Normal operating temperature range: … °C
3.2.12.2.1.12. | Make of catalytic converter: …
3.2.12.2.1.13. | Identifying part number: …
3.2.12.2.2. | Sensors
3.2.12.2.2.1. | Oxygen and/or lambda sensor(s): yes/no (1)
3.2.12.2.2.1.1. | Make: …
3.2.12.2.2.1.2. | Location: …
3.2.12.2.2.1.3. | Control range: …
3.2.12.2.2.1.4. | Type or working principle: …
3.2.12.2.2.1.5. | Identifying part number: …
3.2.12.2.2.2. | NOx sensor: yes/no (1)
3.2.12.2.2.2.1. | Make: …
3.2.12.2.2.2.2. | Type: …
3.2.12.2.2.2.3. | Location
3.2.12.2.2.3. | Particulate sensor: yes/no (1)
3.2.12.2.2.3.1. | Make: …
3.2.12.2.2.3.2. | Type: …
3.2.12.2.2.3.3. | Location: …
3.2.12.2.3. | Air injection: yes/no (1)
3.2.12.2.3.1. | Type (pulse air, air pump, etc.): …
3.2.12.2.4. | Exhaust gas recirculation (EGR): yes/no (1)
3.2.12.2.4.1. | Characteristics (make, type, flow, high pressure/low pressure/combined pressure, etc.): …
3.2.12.2.4.2. | Water-cooled system (to be specified for each EGR system e.g. low pressure/high pressure/combined pressure: yes/no (1)
3.2.12.2.5. | Evaporative emissions control system (petrol and ethanol engines only): yes/no (1)
3.2.12.2.5.1. | Detailed description of the devices: …
3.2.12.2.5.2. | Drawing of the evaporative control system: …
3.2.12.2.5.3. | Drawing of the carbon canister: …
3.2.12.2.5.4. | Mass of dry charcoal: … g
3.2.12.2.5.5. | Schematic drawing of the fuel tank (petrol and ethanol engines only): …
3.2.12.2.5.5.1. | Fuel tank system capacity, material and construction: …
3.2.12.2.5.5.2. | Description of vapour hose material, fuel line material and connection technique of the fuel system: …
3.2.12.2.5.5.3. | Sealed tank system: yes/no
3.2.12.2.5.5.4. | Description of fuel tank relief valve setting (air ingestion and relief): …
3.2.12.2.5.5.5. | Description of the purge control system: …
3.2.12.2.5.6. | Description and schematic of the heat shield between tank and exhaust system: …
3.2.12.2.5.7. | Permeability factor: …
3.2.12.2.6. | Particulate trap (PT): yes/no (1)
3.2.12.2.6.1. | Dimensions, shape and capacity of the particulate trap: …
3.2.12.2.6.2. | Design of the particulate trap: …
3.2.12.2.6.3. | Location (reference distance in the exhaust line): …
3.2.12.2.6.4. | Make of particulate trap: …
3.2.12.2.6.5. | Identifying part number: …
3.2.12.2.7 | On-board-diagnostic (OBD) system: yes/no (1)
3.2.12.2.7.1. | Written description and/or drawing of the MI: …
3.2.12.2.7.2. | List and purpose of all components monitored by the OBD system: …
3.2.12.2.7.3. | Written description (general working principles) for
3.2.12.2.7.3.1 | Positive-ignition engines
3.2.12.2.7.3.1.1. | Catalyst monitoring: …
3.2.12.2.7.3.1.2. | Misfire detection: …
3.2.12.2.7.3.1.3. | Oxygen sensor monitoring: …
3.2.12.2.7.3.1.4. | Other components monitored by the OBD system: …
3.2.12.2.7.3.2. | Compression-ignition engines
3.2.12.2.7.3.2.1. | Catalyst monitoring: …
3.2.12.2.7.3.2.2. | Particulate trap monitoring: …
3.2.12.2.7.3.2.3. | Electronic fuelling system monitoring: …
3.2.12.2.7.3.2.5. | Other components monitored by the OBD system: …
3.2.12.2.7.4. | Criteria for MI activation (fixed number of driving cycles or statistical method): …
3.2.12.2.7.5. | List of all OBD output codes and formats used (with explanation of each): …
3.2.12.2.7.6. | The following additional information shall be provided by the vehicle manufacturer for the purposes of enabling the manufacture of OBD-compatible replacement or service parts and diagnostic tools and test equipment.
3.2.12.2.7.6.1. | A description of the type and number of the preconditioning cycles or alternative preconditioning methods used for the original type approval of the vehicle and the reason for their usage.
3.2.12.2.7.6.2. | A description of the type of the OBD demonstration cycle used for the original type-approval of the vehicle for the component monitored by the OBD system.
3.2.12.2.7.6.3. |
A comprehensive document describing all sensed components with the strategy for fault detection and MI activation (fixed number of driving cycles or statistical method), including a list of relevant secondary sensed parameters for each component monitored by the OBD system. A list of all OBD output codes and format used (with an explanation of each) associated with individual emission related power-train components and individual non-emission related components, where monitoring of the component is used to determine MI activation, including in particular a comprehensive explanation for the data given in service $05 Test ID $21 to FF and the data given in service $06.
In the case of vehicle types that use a communication link in accordance with ISO 15765-4 ‘Road vehicles, diagnostics on controller area network (CAN) — Part 4: requirements for emissions-related systems’, a comprehensive explanation for the data given in service $06 Test ID $00 to FF, for each OBD monitor ID supported, shall be provided.
3.2.12.2.7.6.4. | The information required above may be defined by completing a table as described below.
3.2.12.2.7.6.4.1. |
Light-duty vehicles
Component | Fault code | Monitoring strategy | Fault detection criteria | MI activation criteria | Secondary parameters | Preconditioning | Demonstration test
Catalyst | P0420 | Oxygen sensor 1 and sensor 2 signals | Difference between sensor 1 and sensor 2 signals- | 3rd cycle | Engine speed load, A/F mode, catalyst temperature | Two Type 1 cycles | Type 1
3.2.12.2.8. | Other system: …
3.2.12.2.8.2. | Driver inducement system
3.2.12.2.8.2.3. | Type of inducement system: no engine restart after countdown/no start after refuelling/fuel-lockout/performance restriction
3.2.12.2.8.2.4. | Description of the inducement system
3.2.12.2.8.2.5. | Equivalent to the average driving range of the vehicle with a complete tank of fuel: … km
3.2.12.2.10. | Periodically regenerating system: (provide the information below for each separate unit)
3.2.12.2.10.1. | Method or system of regeneration, description and/or drawing: …
3.2.12.2.10.2. | The number of Type 1 operating cycles, or equivalent engine test bench cycles, between two cycles where regenerative phases occur under the conditions equivalent to Type 1 test (Distance ‘D’): …
3.2.12.2.10.2.1. | Applicable Type 1 cycle (indicate the applicable procedure: Annex XXI or UN/ECE Regulation 83): …
3.2.12.2.10.2.2. | The number of complete applicable test cycles required for regeneration (distance ‘d’)
3.2.12.2.10.3. | Description of method employed to determine the number of cycles between two cycles where regenerative phases occur: …
3.2.12.2.10.4. | Parameters to determine the level of loading required before regeneration occurs (i.e. temperature, pressure etc.): …
3.2.12.2.10.5. | Description of method used to load system: …
3.2.12.2.11. | Catalytic converter systems using consumable reagents (provide the information below for each separate unit) yes/no (1)
3.2.12.2.11.1. | Type and concentration of reagent needed: …
3.2.12.2.11.2. | Normal operational temperature range of reagent: …
3.2.12.2.11.3. | International standard: …
3.2.12.2.11.4. | Frequency of reagent refill: continuous/maintenance (where appropriate):
3.2.12.2.11.5. | Reagent indicator: (description and location) …
3.2.12.2.11.6. | Reagent tank
3.2.12.2.11.6.1. | Capacity: …
3.2.12.2.11.6.2. | Heating system: yes/no
3.2.12.2.11.6.2.1. | Description or drawing
3.2.12.2.11.7. | Reagent control unit: yes/no (1)
3.2.12.2.11.7.1. | Make: …
3.2.12.2.11.7.2. | Type: …
3.2.12.2.11.8. | Reagent injector (make type and location): …
3.2.12.2.11.9. | Reagent quality sensor (make, type and location): …
3.2.12.2.12. | Water injection: yes/no (1)
3.2.13. | Smoke opacity
3.2.13.1. | Location of the absorption coefficient symbol (compression ignition engines only): …
3.2.14. | Details of any devices designed to influence fuel economy (if not covered by other items): …
3.2.15. | LPG fuelling system: yes/no (1)
3.2.15.1. | Type-approval number according to Regulation (EC) No 661/2009 (r) or Regulation (EU) 2019/2144(s): …
3.2.15.2. | Electronic engine management control unit for LPG fuelling
3.2.15.2.1. | Make(s): …
3.2.15.2.2. | Type(s): …
3.2.15.2.3. | Emission-related adjustment possibilities: …
3.2.15.3. | Further documentation
3.2.15.3.1. | Description of the safeguarding of the catalyst at switch-over from petrol to LPG or back: …
3.2.15.3.2. | System lay-out (electrical connections, vacuum connections compensation hoses, etc.): …
3.2.15.3.3. | Drawing of the symbol: …
3.2.16. | NG fuelling system: yes/no (1)
3.2.16.1. | Type-approval number according to Regulation (EC) No 661/2009 or Regulation (EU) 2019/2144: …
3.2.16.2. | Electronic engine management control unit for NG fuelling
3.2.16.2.1. | Make(s): …
3.2.16.2.2. | Type(s): …
3.2.16.2.3. | Emission-related adjustment possibilities: …
3.2.16.3. | Further documentation
3.2.16.3.1. | Description of the safeguarding of the catalyst at switch-over from petrol to NG or back: …
3.2.16.3.2. | System lay-out (electrical connections, vacuum connections compensation hoses, etc.): …
3.2.16.3.3. | Drawing of the symbol: …
3.2.18. | Hydrogen fuelling system: yes/no (1)
3.2.18.1. | EC type-approval number in accordance with Regulation (EC) No 79/2009 or Regulation (EU) 2019/2144: …
3.2.18.2. | Electronic engine management control unit for hydrogen fuelling
3.2.18.2.1. | Make(s): …
3.2.18.2.2. | Type(s): …
3.2.18.2.3. | Emission-related adjustment possibilities: …
3.2.18.3. | Further documentation
3.2.18.3.1. | Description of the safeguarding of the catalyst at switch-over from petrol to hydrogen or back: …
3.2.18.3.2. | System lay-out (electrical connections, vacuum connections compensation hoses, etc.): …
3.2.18.3.3. | Drawing of the symbol: …
3.2.19. | H2NG fuelling system: yes/no (1)
3.2.19.1. | Percentage of hydrogen in the fuel (the maximum specified by the manufacturer): …
3.2.19.2. | Number of the EU type-approval certificate issued in accordance with UN Regulation No 110: …
3.2.19.3 | Electronic engine management control unit for H2NG fuelling
3.2.19.3.1. | Make(s): …
3.2.19.3.2. | Type(s): …
3.2.19.3.3. | Emission-related adjustment possibilities: …
3.2.19.4. | Further documentation
3.2.19.4.2. | System lay-out (electrical connections, vacuum connections compensation hoses, etc.): …
3.2.19.4.3. | Drawing of the symbol: …
3.2.20. | Heat storage information
3.2.20.1. | Active heat storage device: yes/no (1)
3.2.20.1.1. | Enthalpy: … (J)
3.2.20.2. | Insulation materials: yes/no (1)
3.2.20.2.1. | Insulation material: …
3.2.20.2.2. | Insulation nominal volume: …(t)
3.2.20.2.3. | Insulation nominal weight: …(t)
3.2.20.2.4. | Insulation location: …
3.2.20.2.5. | Worst case approach vehicle cool down: yes/no (1)
3.2.20.2.5.1. | (not worst case approach) Minimum soaking time, tsoak_ATCT (hours):…
3.2.20.2.5.2. | (not worst case approach) Location of the engine temperature measurement: …
3.2.20.2.6. | Single interpolation family within the ATCT family approach: yes/no (1)
3.2.20.2.7. | Worst case approach with regards to insulation: yes/no (1)
3.2.20.2.7.1. | Description of the ATCT measured reference vehicle regarding insulation: …
3.3. | Electric powertrain (for PEV only)
3.3.1. | General description of electric power train
3.3.1.1. | Make: …
3.3.1.2. | Type: …
3.3.1.3. | Use (1): Monomotor/multimotors (number): …
3.3.1.4. | Transmission arrangement: parallel/transaxial/others, to precise: …
3.3.1.5. | Test voltage: … V
3.3.1.6. | Motor nominal speed: … min–1
3.3.1.7. | Motor maximum speed: … min–1 or by default: reducer outlet shaft/gear box speed (specify gear engaged): … min–1
3.3.1.9. | Maximum power: … kW
3.3.1.10. | Maximum thirty minutes power: … kW
3.3.1.11. |
Flexible range (where P > 90 per cent of max. power):
speed at the beginning of range: … min–1
speed at the end of range: … min–1
3.3.2. | Traction REESS
3.3.2.1. | Trade name and mark of the REESS: …
3.3.2.2. | Kind of electro-chemical couple: …
3.3.2.3. | Nominal voltage: … V