The following information, if applicable, is the minimum data required for the evaporative emisssion test.
APPLICANT |
Manufacturer |
SUBJECT | …
Evaporative family identifier | : |
Object submitted to tests
Make | : |
CONCLUSION | The object submitted to tests complies with the requirements mentioned in the subject.
PLACE, | DD/MM/YYYY
Every Technical Service is free to include additional information
Vehicle numbers | : | Prototype number and VIN
Category | : |
Powertrain architecture | : | internal combustion, hybrid, electric or fuel cell
Make | : |
Type | : |
Working principle | : | two/four stroke
Cylinders number and arrangement | : |
Engine capacity (cm3) | : |
Supercharging | : | yes/no
Direct injection | : | yes/no or description
Vehicle fuel type | : | Monofuel / bifuel / flex fuel
Engine lubricant | : | Make and type
Cooling system | : | Type: air/water/oil
Injection pump | : |
Injector(s) | : |
Fuel tank
Layer(s) | : | monolayer/ multilayer
Material for the fuel tank | : | metal / …
Material for other parts of the fuel system | : | …
Sealed | : | yes/no
Nominal tank capacity (l) | : |
Canister
Make and type | : |
Type of activated carbon | : |
Volume of charcoal (l) | : |
Mass of charcoal (g) | : |
Declared BWC (g) | : | xx,x
Date of tests | : | (day/month/year)
Place of the test | : |
Carbon canister ageing test report | : |
Loading rate | : |
Fuel specification
Make | : |
Type | : | name of reference fuel …
Density at 15 °C (kg/m3) | : |
Ethanol content (%) | : |
Batch number | : |
Date of tests | : | (day/month/year)
Place of the test | : |
Permeability factor test report | : |
HC measured at week 3, HC3W (mg/24 h) | : | xxx
HC measured at week 20, HC20W (mg/24 h) | : | xxx
Permeability Factor, PF (mg/24 h) | : | xxx
Alternative Permeability Factor, PF (mg/24 h) | : | yes/no
Date of tests | : | (day/month/year)
Place of the test | : |
Method of chassis dyno setting | : | Fixed run / iterative / alternative with its own warmup cycle
Dynamometer operation mode | | yes/no
Coastdown mode | : | yes/no
Test mass of VH (kg) | : |
f0 (N) | : |
f1 (N/(km/h)) | : |
f2 (N/(km/h)2) | : |
Cycle (without downscaling) | : | Class 1 / 2 / 3
Gear shifting | : | Average gear for v ≥ 1 km/h, rounded to four places of decimal
Tested vehicle | : | VH or description
Mileage (km) | : |
Age (weeks) | : |
Test procedure | : | Continuous (sealed fuel tank systems) / Continuous (non-sealed fuel tank systems) / Stand –alone (sealed fuel tank systems)
Description of soak periods (time and temperature) | : |
Puff loss loading value (g) | : | xx,x (if applicable)
Evaporative test | hot soak, MHS | 1st 24h diurnal, MD1 | 2nd 24h diurnal, MD2
Mean temperature (°C) | | — | —
Evaporative emission (g/test) | x,xxx | x,xxx | x,xxx
Final result, MHS + MD1 + MD2 + (2xPF) (g/test) | x,xx
Limit (g/test) | 2,0
2.3.6.
Demonstrated procedures for alternative conformity of production testing where applicable:
Test for leakage | : | Alternative pressures and/or time or alternative test procedure
Test for venting | : | Alternative pressure and/or time or alternative test procedure
Purge test | : | Alternative flow rate or test procedure
Sealed tank | : | Alternative test procedure