16 Appendix 8b, Regulation (EU) 2017/1151

In forcesince 1 Sep 2023

The following information, if applicable, is the minimum data required for the road load determination test.

APPLICANT | | |

Manufacturer | | |

SUBJECT | Determination of a vehicle road load /…

Roadload family identifier(s) | : |

Object submitted to tests

Make | : |

Type | : |

CONCLUSION | The object submitted to tests complies with the requirements mentioned in the subject.

PLACE, | DD/MM/YYYY

Make(s) concerned | : |

Type(s) concerned | : |

Commercial description | : |

Maximal speed (km/h) | : |

Powered axle(s) | : |

If no interpolation: the worst-case vehicle (regarding energy demand) shall be described

Combination with | : | Flat belt dynamometer / chassis dynamometer

Wind tunnel | Dynamometer

HR | LR | HR | LR

Make | | | |

Type | | | |

Version | | | |

Cycle energy demand over a complete WLTC Class 3 cycle (kJ) | | | |

Deviation from production series | — | — | |

Mileage (km) | — | — | |

Or (in case of roadload matrix family):

Make | : |

Type | : |

Version | : |

Cycle energy demand over a complete WLTC (kJ) | : |

Deviation from production series | : |

Mileage (km) | : |

Dynamometer

HR | LR

Test mass (kg) | |

Average mass mav (kg) | |

Value of mr (kg per axle) | |

Category M vehicle:

proportion of the vehicle mass in running order on the front axle (%)

Category N vehicle:

weight distribution (kg or %)

Or (in case of roadload matrix family):

Test mass (kg) | : |

Average mass mav(kg) | : | (average before and after the test)

Technically permissible maximum laden mass | : |

Estimated arithmetic average of the mass of optional equipment | : |

Category M vehicle:

proportion of the vehicle mass in running order on the front axle (%)

: |

Category N vehicle:

weight distribution (kg or %)

: |

Wind tunnel | Dynamometer

HR | LR | HR | LR

Size designation | | | |

Make | | | |

Type | | | |

Rolling resistance

Front (kg/t) | — | — | |

Rear (kg/t) | — | — | |

Tyre pressure

Front (kPa) | — | — | |

Rear (kPa) | — | — | |

Or (in case of roadload matrix family):

Size designation

Make | : |

Type | : |

Rolling resistance

Front (kg/t) | : |

Rear (kg/t) | : |

Tyre pressure

Front (kPa) | : |

Rear (kPa) | : |

Wind tunnel

HR | LR

Type | AA/AB/AC/AD/AE/AF BA/BB/BC/BD |

Version | |

Aerodynamic devices

Movable aerodynamic body parts | y/n and list if applicable |

Installed aerodynamic options list | |

Delta (CD × Af)LH compared to HR (m2) | — |

Or (in case of roadload matrix family):

Body shape description | : | Square box (if no representative body shape for a complete vehicle can be determined)

Frontal area Afr (m2) | : |

HR | LR

Make | |

Type | |

Version | |

Cycle energy demand over a complete WLTC Class 3 cycle (kJ) | |

Deviation from production series | |

Mileage | |

Or (in case of roadload matrix family):

Make | : |

Type | : |

Version | : |

Cycle energy demand over a complete WLTC (kJ) | : |

Deviation from production series | : |

Mileage (km) | : |

HR | LR

Test mass (kg) | |

Average mass mav (kg) | |

Value of mr (kg per axle) | |

Category M vehicle:

proportion of the vehicle mass in running order on the front axle (%)

Category N vehicle:

weight distribution (kg or %)

Or (in case of roadload matrix family):

Test mass (kg) | : |

Average mass mav (kg) | : | (average before and after the test)

Technically permissible maximum laden mass | : |

Estimated arithmetic average of the mass of optional equipment | : |

Category M vehicle:

proportion of the vehicle mass in running order on the front axle (%)

Category N vehicle:

weight distribution (kg or %)

HR | LR

Size designation | |

Make | |

Type | |

Rolling resistance

Front (kg/t) | |

Rear (kg/t) | |

Tyre pressure

Front (kPa) | |

Rear (kPa) | |

Or (in case of roadload matrix family):

Size designation | : |

Make | : |

Type | : |

Rolling resistance

Front (kg/t) | : |

Rear (kg/t) | : |

Tyre pressure

Front (kPa) | : |

Rear (kPa) | : |

HR | LR

Type | AA/AB/AC/AD/AE/AF BA/BB/BC/BD |

Version | |

Aerodynamic devices

Movable aerodynamic body parts | y/n and list if applicable |

Installed aerodynamic options list | |

Delta (CD × Af)LH compared to HR (m2) | — |

Or (in case of roadload matrix family):

Body shape description | : | Square box (if no representative body shape for a complete vehicle can be determined)

Frontal area Afr (m2) | : |

Engine code | : |

Transmission type | : | manual, automatic, CVT

Transmission model

(manufacturer's codes)

: | (torque rating and no of clutches → to be included in info doc)

Covered transmission models

(manufacturer's codes)

: | | |

Engine rotational speed divided by vehicle speed | : | Gear | Gear ratio | N/V ratio

1st | 1/.. |

2nd | 1/.. |

3rd | 1/.. |

4th | 1/.. |

5th | 1/.. |

6th | 1/.. |

.. | |

.. | |

Electric machine(s) coupled in position N | : | n.a. (no electric machine or no coastdown mode)

Type and number of electric machines | : | construction type: asynchronous/ synchronous…

Type of coolant | : | air, liquid, …

Repeat §2.3.1. with VL data

Dates of tests | : |

dd/mm/yyyy (wind tunnel)

dd/mm/yyyy (dynamometer)

or

dd/mm/yyyy (on road)

[As defined in point 4.2. of Appendix 1 of Annex I to Regulation (EU) 2018/858.] [The dimension defined in point 6.3 of Standard ISO 612:1978.]

Method of the test | : |

coastdown

or torque meter method

Facility (name / location / track's reference) | : |

Coastdown mode | : | y/n

Wheel alignment | : | Toe and camber values

Ground clearance | : |

Vehicle height | : |

Drivetrain lubricants | : |

Wheel bearing lubricants | : |

Brake adjustment to avoid unrepresentative parasitic drag | : |

Maximum reference speed (km/h) | : |

Anemometry | : |

stationary

or on board: influence of anemometry (CD × A) and if it was corrected.

Number of split(s) | : |

Wind | : | average, peaks and direction in conjunction with direction of the test track

Air pressure | : |

Temperature (mean value) | : |

Wind correction | : | y/n

Tyre pressure adjustment | : | y/n

Raw results | : |

Torque method:

c0 =

c1 =

c2 =

Coastdown method:

f0

f1

f2

Final results | |

Torque method:

c0 =

c1 =

c2 =

and

f0 =

f1 =

f2 =

Coastdown method:

f0 =

f1 =

f2 =

Or

Facility (name/location/dynamometer's reference) | : | |

Qualification of the facilities | : | Report reference and date

Dynamometer

Type of dynamometer | : | flat belt or chassis dynamometer

Method | : | stabilised speeds or deceleration method

Warm up | : | warm-up by dyno or by driving the vehicle

Correction of the roller curve | : | (for chassis dynamometer, if applicable)

Method of chassis dynamometer setting | : | Fixed run / iterative / alternative with its own warmup cycle

Measured aerodynamic drag coefficient multiplied by the frontal area | : | Velocity (km/h) | CD × A (m2)

… | …

… | …

Result | : |

f0 =

f1 =

f2 =

Or

[As defined in point 4.2. of Appendix 1 of Annex I to Regulation (EU) 2018/858.] [The dimension defined in point 6.3 of Standard ISO 612:1978.]

Method of the test | : |

coastdown

or torque meter method

Facility (name/location/track's reference) | : |

Coastdown mode | : | y/n

Wheel alignment | : | Toe and camber values

Ground clearance | : |

Vehicle height | : |

Drivetrain lubricants | : |

Wheel bearing lubricants | : |

Brake adjustment to avoid unrepresentative parasitic drag | : |

Maximum reference speed (km/h) | : |

Anemometry | : |

stationary

or on board: influence of anemometry (CD × A) and if it was corrected.

Number of split(s) | : |

Wind | : | average, peaks and direction in conjunction with direction of the test track

Air pressure | : |

Temperature (mean value) | : |

Wind correction | : | y/n

Tyre pressure adjustment | : | y/n

Raw results | : |

Torque method:

c0r =

c1r =

c2r =

Coastdown method:

f0r =

f1r =

f2r =

Final results | |

Torque method:

c0r =

c1r =

c2r =

and

f0r (calculated for vehicle HM) =

f2r (calculated for vehicle HM) =

f0r (calculated for vehicle LM) =

f2r (calculated for vehicle LM) =

Coastdown method:

f0r (calculated for vehicle HM) =

f2r (calculated for vehicle HM) =

f0r (calculated for vehicle LM) =

f2r (calculated for vehicle LM) =

Or

Facility (name/location/dynamometer's reference) | : | |

Qualification of the facilities | : | Report reference and date

Dynamometer

Type of dynamometer | : | flat belt or chassis dynamometer

Method | : | stabilised speeds or deceleration method

Warm up | : | warm-up by dyno or by driving the vehicle

Correction of the roller curve | : | (for chassis dynamometer, if applicable)

Method of chassis dynamometer setting | : | Fixed run / iterative / alternative with its own warmup cycle

Measured aerodynamic drag coefficient multiplied by the frontal area | : | Velocity (km/h) | CD × A (m2)

… | …

… | …

Result | : |

f0r =

f1r =

f2r =

f0r (calculated for vehicle HM) =

f2r (calculated for vehicle HM) =

f0r (calculated for vehicle LM) =

f2r (calculated for vehicle LM) =

Repeat §2.4.1. with VL data’