1.
Section 3 of the EC type-approval number issued according to Article 6(1) shall be composed by the number of the implementing regulatory act or the latest amending regulatory act applicable to the EC type-approval. This number shall be followed by one or more characters reflecting the different categories in accordance with Table 1.
[This limitation does not apply if a vehicle was type-approved in accordance with the requirements of Regulation (EC) No 715/2007 and its implementing legislation prior to 1 September 2017 in the case of category M and N1 class I vehicles, or prior to 1 September 2018 in the case of category N1 class II and III and category N2 vehicles, according to the last subparagraph of Article 15(4).] [In case the value of dnec changes following the review of 2024, a different character will be assigned to the vehicles types approved with the revised dnec.] [Vehicles of categories M1 and N1 manufactured by small-volume manufacturers as defined in Article 3, point (48), of Regulation (EU) 2024/1257 or by ultra-small-volume manufacturers as defined in Article 3, point (49), of Regulation (EU) 2024/1257.] [Vehicles of categories M2 and N2 manufactured by small-volume manufacturers as defined in Article 3, point (48), of Regulation (EU) 2024/1257 or by ultra-small-volume manufacturers as defined in Article 3, point (49), of Regulation (EU) 2024/1257.]
‘Euro 6-1’ OBD standardFull Euro 6 OBD requirements but with preliminary OBD threshold limits as defined in point 2.3.4 of Annex XI and partially relaxed IUPR;
‘Euro 6-2’ OBD standardFull Euro 6 OBD requirements but with final OBD threshold limits as defined in point 2.3.3 of Annex XI;
‘Euro 6b’ emissions standardEuro 6 emission requirements including revised measurement procedure for particulate matter, particle number standards (preliminary values for PI direct injection);
‘Euro 6c’ emissions standardRDE NOx testing for monitoring only (no NTE emission limits applied), otherwise full Euro 6 tailpipe emission requirements (including PN RDE);
‘Euro 6c-EVAP’ emissions standardRDE NOx testing for monitoring only (no NTE emission limits applied), otherwise full Euro 6 tailpipe emission requirements (including PN RDE), revised evaporative emissions test procedure;
‘Euro 6d-TEMP’ emissions standardRDE NOx testing against temporary conformity factors, otherwise full Euro 6 tailpipe emission requirements (including PN RDE);
‘Euro 6d-TEMP-ISC’ emissions standardRDE testing against temporary conformity factors, full Euro 6 tailpipe emission requirements (including PN RDE) and new ISC procedure;
‘Euro 6d-TEMP-EVAP-ISC'’ emissions standardRDE NOx testing against temporary conformity factors, full Euro 6 tailpipe emission requirements (including PN RDE), 48H evaporative emissions test procedure and new ISC procedure;
‘Euro 6d-TEMP-EVAP’ emissions standardRDE NOx testing against temporary conformity factors, otherwise full Euro 6 tailpipe emission requirements (including PN RDE), revised evaporative emissions test procedure;
‘Euro 6d’ emissions standardRDE testing against final conformity factors, otherwise full Euro 6 tailpipe emission requirements, revised evaporative emissions test procedure;
‘Euro 6d-ISC' RDE’testing against final conformity factors, full Euro 6 tailpipe emission requirements, 48H evaporative emissions test procedure and new ISC procedure;
‘Euro 6d-ISC-FCM' RDE’testing against final conformity factors, full Euro 6 tailpipe emission requirements, 48H evaporative emissions test procedure, devices for monitoring the consumption of fuel and/or electric energy and new ISC procedure;
‘Euro 6e’As above + RDE compliance considering updated PEMS margins, OBFCM for N2 vehicles;
‘Euro 6e-bis’As above + increased extended ambient conditions for RDE compliance + AES Flag + utility factor based on dneb (see point 3.2 of Annex XXI);
‘Euro 6e-bis-FCM’As above + utility factor based on dnec (see point 3.2. of Annex XXI).
Character | Emission standard | OBD standard | Vehicle category and class | Engine | Implementation date: new types | Implementation date: new vehicles | Last date of registration
AA | Euro 6c | Euro 6-1 | M, N1 class I | PI, CI | | | 31.8.2018
BA | Euro 6b | Euro 6-1 | M, N1 class I | PI, CI | | | 31.8.2018
AB | Euro 6c | Euro 6-1 | N1 class II | PI, CI | | | 31.8.2019
BB | Euro 6b | Euro 6-1 | N1 class II | PI, CI | | | 31.8.2019
AC | Euro 6c | Euro 6-1 | N1 class III, N2 | PI, CI | | | 31.8.2019
BC | Euro 6b | Euro 6-1 | N1 class III, N2 | PI, CI | | | 31.8.2019
AD | Euro 6c | Euro 6-2 | M, N1 class I | PI, CI | | 1.9.2018 | 31.8.2019
AE | Euro 6c-EVAP | Euro 6-2 | N1 class II | PI, CI | | 1.9.2019 | 31.8.2020
AF | Euro 6c-EVAP | Euro 6-2 | N1 class III, N2 | PI, CI | | 1.9.2019 | 31.8.2020
AG | Euro 6d-TEMP | Euro 6-2 | M, N1 class I | PI, CI | 1.9.2017 | | 31.8.2019
BG | Euro 6d-TEMP-EVAP | Euro 6-2 | M, N1 class I | PI, CI | | | 31.8.2019
CG | Euro 6d-TEMP-ISC | Euro 6-2 | M, N1 class I | PI, CI | 1.1.2019 | | 31.8.2019
DG | Euro 6d-TEMP-EVAP-ISC | Euro 6-2 | M, N1 class I | PI, CI | 1.9.2019 | 1.9.2019 | 31.12.2020
AH | Euro 6d-TEMP | Euro 6-2 | N1 class II | PI, CI | 1.9.2018 | | 31.8.2019
BH | Euro 6d-TEMP-EVAP | Euro 6-2 | N1 class II | PI, CI | | | 31.8.2020
CH | Euro 6d-TEMP-EVAP-ISC | Euro 6-2 | N1 class II | PI, CI | 1.9.2019 | 1.9.2020 | 31.12.2021
AI | Euro 6d-TEMP | Euro 6-2 | N1 class III, N2 | PI, CI | 1.9.2018 | | 31.8.2019
BI | Euro 6d-TEMP-EVAP | Euro 6-2 | N1 class III, N2 | PI, CI | | | 31.8.2020
CI | Euro 6d-TEMP-EVAP-ISC | Euro 6-2 | N1 class III, N2 | PI, CI | 1.9.2019 | 1.9.2020 | 31.12.2021
AJ | Euro 6d | Euro 6-2 | M, N1 class I | PI, CI | | | 31.8.2019
AK | Euro 6d | Euro 6-2 | N1 class II | PI, CI | | | 31.8.2020
AL | Euro 6d | Euro 6-2 | N1 class III, N2 | PI, CI | | | 31.8.2020
AM | Euro 6d-ISC | Euro 6-2 | M, N1 class I | PI, CI | | | 31.12.2020
AN | Euro 6d-ISC | Euro 6-2 | N1 class II | PI, CI | | | 31.12.2021
AO | Euro 6d-ISC | Euro 6-2 | N1 class III, N2 | PI, CI | | | 31.12.2021
AP | Euro 6d-ISC-FCM | Euro 6-2 | M, N1 class I | PI, CI | 1.1.2020 | 1.1.2021 | 31.8.2024
AQ | Euro 6d-ISC-FCM | Euro 6-2 | N1 class II | PI, CI | 1.1.2021 | 1.1.2022 | 31.8.2024
AR | Euro 6d-ISC-FCM | Euro 6-2 | N1 class III, N2 | PI, CI | 1.1.2021 | 1.1.2022 | 31.8.2024
EA | Euro 6e | Euro 6-2 | M, N1, N2 | PI, CI | 1.9.2023 | 1.9.2024 | 31.12.2025
EB | Euro 6e -bis | Euro 6-2 | M1, N1 | PI, CI | 1.1.2025 | 1.1.2026 | 28.11.2027
ED | Euro 6e-bis | Euro 6-2 | M1, N1 SVM | PI, CI | 1.1.2025 | 1.1.2026 | 31.12.2027
EB | Euro 6e-bis | Euro 6-2 | M2, N2 | PI, CI | 1.1.2025 | 1.1.2026 | 31.12.2027
EC | Euro 6e-bis-FCM | Euro 6-2 | M1, N1 | PI, CI | | | 28.11.2027
EC | Euro 6e-bis-FCM | Euro 6-2 | M2, N2 | PI, CI | 1.1.2027 | 1.1.2028 | 28.5.2029
EE | Euro 6e-bis-FCM | | M1, N1 SVM | PI, CI | 1.1.2027 | 1.1.2028 | 30.6.2030
EE | Euro 6e-bis-FCM | | M2, N2 SVM | PI, CI | 1.1.2027 | 1.1.2028 | 30.6.2031
AX | n.a. | n.a. | M1, N1 | Battery full electric | | | 28.11.2027
AX | n.a. | n.a. | M2, N2 | Battery full electric | | | 28.5.2029
AS | n.a. | n.a. | M1, N1 SVM | Battery full electric | | | 30.6.2030
AS | n.a. | n.a. | M2, N2 SVM | Battery full electric | | | 30.6.2031
AY | n.a. | n.a. | M1, N1 | Fuel cell | | | 28.11.2027
AY | n.a. | n.a. | M2, N2 | Fuel cell | | | 28.5.2029
AT | n.a. | n.a. | M1, N1 SVM | Fuel cell | | | 30.6.2030
AT | n.a. | n.a. | M2, N2 SVM | Fuel cell | | | 30.6.2031
AZ | n.a. | n.a. | M1 and N1 vehicles using certificates in accordance with point 2.1.1 of Annex I | PI, CI | | | 30.6.2030
AZ | n.a. | n.a. | M2 and N2 vehicles using certificates in accordance with point 2.1.1 of Annex I | PI, CI | | | 30.6.2031
2.1 An example is provided below of a type-approval of a Euro 6 light passenger car to the ‘Euro 6d’ emission standard and ‘Euro 6-2’ OBD standard, identified by the characters ‘AJ’ according to Table 1. The approval was granted for the base Regulation (EC) 715/2007 and its implementing Regulation (EU) 2017/1151. It is the 17th approval of this kind issued by Luxembourg, identified by the code ‘e13’, without any extension. So the fourth and fifth sections of the approval number are ‘0017’ and ‘00’, respectively.
e13*715/2007*2017/1151AJ*0017*00
2.2 This second example shows a type-approval of a Euro 6 N1 class II light commercial vehicle to the ‘Euro 6d-TEMP’ emission standard and ‘Euro 6-2’ OBD standard, identified by the characters ‘AH’ according to Table 1. The approval was granted for the base Regulation (EC) 715/2007 and its implementing legislation (as amended by Regulation (EU) 2018/1832). It is the 1st approval of this kind issued by Romania, identified by the code ‘e19’, without any extension. So the fourth and fifth sections of the approval number are ‘0001’ and ‘00’, respectively.
e19*715/2007*2018/1832AH*0001*00
2.3 This third example shows a type-approval of a Euro 6 light passenger car to the ‘Euro 6e’ emission standard and ‘Euro 6-2’ OBD standard, identified by the characters ‘EA’ according to Table 1. The approval was granted for the base Regulation (EC) 715/2007 and its implementing legislation (as amended by this Regulation (EU) 2023/443). It is a second extension to the 7th approval of this kind issued by the Netherlands, identified by the code ‘e4’. So the fourth and fifth sections of the approval number are ‘00007’ and ‘02’, respectively.
e4*715/2007*2023/443EA*00007*02