24 Appendix 5, Regulation (EU) 2017/1151

In forcesince 1 Sep 2023

ID | Input | Type of data | Unit | Description

1 | Emission TA number | Text | - - | As reported in Annex I/Appendix 6 (Reg. (EU) 2017/1151)

1a | Emission Type Approval Date | Date | - - | Date of emission type-

2 | Interpolation Family ID (IP ID) | Text | - - |

As reported in Annex I, Appendix 4,

Section II, Point 0. (Reg. (EU) 2017/1151)

and in UNECE Regulation 154, Annex A2, Addendum to type approval communication item 0.1: Interpolation Family Identifier as defined in paragraph 6.2.2 of the same regulation

5 | ATCT family ID | Text | - - | As reported in Annex I, Appendix 3, point 0.2.3.2. (Reg. (EU) 2017/1151)

7 | RL family ID of vehicle H or RM family ID | Text | - - |

As reported in Annex I, Appendix 3, point 0.2.3.4.1. (for Road Load Matrix Family point 0.2.3.5.)

(Reg. (EU) 2017/1151)

7a | RL family ID of vehicle L (if relevant) | Text | - - | As reported in Annex I, Appendix 3, point 0.2.3.4.2. (Reg. (EU) 2017/1151)

7b | RL family ID of vehicle M (if relevant) | Text | - - | As reported in UNECE Regulation 154, Annex A1 - Appendix 1, point 1.4.2. Road load parameters

13 | Drive wheels of vehicle in family | Enumeration (Front, Rear, 4 Wheel Drive) | - - | Annex I, Addendum to Appendix 4, point 1.7 (Reg. (EU) 2017/1151)

14 | Chassis Dyno configuration during TA test | Enumeration (Single Axle, Dual Axle) | - - | As in UNECE Regulation 154, Annex B6; point 2.4.2.4.

18 | Driver selectable mode(s) used during the TA tests (pure ICE) or for charge sustaining test (NOVC-HEV, OVC-HEV, NOVC-FCHV) |

Possible formats: pdf, jpg.

The name of the file shall be a UUID, unique inside the package.

–

- | State and describe mode(s) used in type approval. In cases of predominant mode this will be only one entry. Alternatively the best and worst case modes need to be described. Description of modes that need to be used for TA tests As in UNECE Regulation 154, Annex B6; point 2.6.6.

19 | Driver selectable mode(s) used during the TA tests for charge depleting test (OVC-HEV) |

Possible formats: pdf, jpg.

The name of the file shall be a UUID, unique inside the package.

–

- | State and describe mode(s) used in type approval. In cases of predominant mode this will be only one entry. Alternatively the best and worst case modes need to be described. Description of modes that need to be used for TA tests As in UNECE Regulation 154, Annex B8 point 3.2.3

20 | Idling engine speed for vehicles with manual transmission fuel 1, fuel 2 (if relevant) | Number | rpm | Annex I, Appendix 3, point 3.2.1.6. (Reg. (EU) 2017/1151)

21 | No. of gears for vehicles with manual transmission | Number | - - | Annex I, Addendum to Appendix 4, point 1.13.2. (Reg. (EU) 2017/1151)

23 | Tyre dimensions of the test vehicle front/rear/middle, for vehicles with manual transmission | Text | - - |

Annex I, Appendix 8a point 1.1.8 (Reg. (EU) 2017/1151)

Use 1 for tyre dimensions of front wheels, 2 for tyre dimensions of rear wheels, 3 for tyre dimensions of middle wheels (if applicable)

24

+

25

Full load power curve with additional safety margin (ASM) for vehicles with manual transmission, fuel 1, fuel 2 (if relevant) | Table values | rpm vs. kW vs. % |

The full load power curve over the engine speed range from nidle to nrated or nmax, or ndv (ngvmax) × vmax, whichever is higher together with ASM (if used for gearshift calculation) from Annex I, Appendix 8a, point 1.2.4.

(Reg. (EU) 2017/1151)

Example of table values can be found in Example of table values can be found in UNECE Regulation 154, Annex B2, Table A2/1

26 | Additional information for gearshift calculation for vehicles with manual transmission, fuel 1, fuel 2 (if relevant) | See table in example | See table in example | Annex I, Appendix 8a, point 1.2.4. (Reg. (EU) 2017/1151)

29 | ATCT FCF fuel 1, fuel 2 (if relevant) | Number | - - |

One value per each fuel in case of Bi-fuel and Flex-fuel vehicle. Always match Fuel 1 with its ATCT FCF and Fuel 2 with its ATCT FCF.

As defined in UNECE Regulation 154, Annex B6a, point 3.8.1.

30a | Additive Ki factor(s) for vehicles equipped with periodically regenerating systems | Table values | g/km for CO2, mg/km for all the rest |

Table defining the values for CO,

NOx, PM, THC (mg/km), and for CO2 (g/km).

Empty if multiplicative Ki factors are provided or for vehicles that don’t have any periodically regenerating systems. Annex I, Appendix 8a, point 2.1.1.1.1. for pollutants and point 2.1.1.2.1. for CO2. (Reg. (EU) 2017/1151)

30b | Multiplicative Ki factors(s) for vehicles equipped with periodically regenerating systems | Table values | no units |

Table defining the values for CO,

NOx, PM, THC, and for CO2. Empty if additive Ki factors are provided or for vehicles that don’t have any periodically regenerating systems.. Annex I, Appendix 8a, point 2.1.1.1.1. for pollutants and point 2.1.1.2.1. for CO2

(Reg. (EU) 2017/1151)

31a | Additive Deterioration Factors (DF) fuel 1, fuel 2 (if relevant) | Table values | (mg/km except for PN which is #/km |

Table defining deterioration factors per each pollutant.

(1)

CO, PM, PN, NOx, NMHC and THC for monofuel gasoline vehicles and all bi-fuel and flexifuel vehicles.

(2)

CO, NOx, NMHC and THC for monofuel LPG and NG vehicles.

(3)

NOx for monofuel H2 vehicles.

(4)

NOx, THC+NOX, CO, PM and PN for all diesel vehicles.

(5)

Empty if multiplicative DF factors are provided. Annex I, Appendix 8a, point 2.1.1.1.1. (Reg. (EU) 2017/1151).

31b | Multiplicative Deterioration Factors (DF) fuel 1, fuel 2 (if relevant) | Table values | no units |

Table defining deterioration factors per each pollutant.

CO, PM, PN, NOx, NMHC and THC for monofuel gasoline vehicles and all bi-fuel and flexifuel vehicles.

CO, NOx, NMHC and THC for monofuel LPG and NG vehicles.

NOx for monofuel H2 vehicles.

NOx, THC+NOx, CO, PM and PN for all diesel vehicles.

Empty if additive DF factors are provided. Annex I, Appendix 8a, point 2.1.1.1.1.

(Reg. (EU) 2017/1151).

32 | Battery voltage for all REESS | Number | V |

As defined in UNECE Regulation 154 Annex B6 - Appendix 2 point 4.1

(DIN EN 60050-482)

33 | K correction coefficient only for NOVC and OVC-HEVs | Table | (g/km)/(Wh/km) |

For NOVC and OVC-HEVs

correction of CS CO2 emissions as defined in UNECE Regulation 154 Annex B8, appendix 2, point 2

42 | Regeneration recognition |

Document pdf or jpg

The name of the file shall be a UUID, unique inside the package.

Description by vehicle manufacturer on how to recognize that a regeneration occurred during a test

43 | Regeneration completion |

Document pdf or jpg

The name of the file shall be a UUID, unique inside the package.

–

| Description of the procedure to complete the regeneration

44a | Index Number of the transition cycle for VL | number | — | For OVC-HEV vehicles only. Number of CD tests performed until break-off criteria is met. Annex I, Appendix 8a, point 2.1.1.4.1.4. (Regulation (EU) 2017/1151)

For multistage or multistage special purpose vehicles

45 | Allowed final Vehicle mass in running order | Number | Kg |

As reported in point 0.2.2.1 in Annex I of Regulation (EU) 2020/683

From-to

45a | Allowed final Vehicle actual mass | Number | kg |

As reported in point 0.2.2.1 in Annex I of Regulation (EU) 2020/683

From-to

45b | Allowed Vehicle technically permissible maximum laden mass (in kg) | Number | kg |

As reported in point 0.2.2.1 in Annex I of Regulation (EU) 2020/683

From-to

46 | Allowed frontal area for final vehicle | Number | cm2 |

As reported in point 0.2.2.1 in Annex I of Regulation (EU) 2020/683

From-to

47 | Allowed Rolling resistance | Number | kg/t |

As reported in point 0.2.2.1 in Annex I of Regulation (EU) 2020/683

From-to

48 | Allowed projected frontal area of air entrance of the front grille | Number | cm2 |

As reported in point 0.2.2.1 in Annex I of Regulation (EU) 2020/683

From-to

FOR ALL VEHICLES

49 | Propulsion Type | Enumeration Pure ICE, OVC-HEV, NOVC-HEV | - - | Propulsion type as defined in ANNEX IIIA, point 3.3.1.2 (a)

50 | Ignition Type |

Enumeration

Positive ignition, Compression ignition

–

- |

Ignition Type as reported in point 3.2.1.1.

Appendix 3 of Annex I (Reg. (EU) 2017/1151)

51 | Fuel Operating Mode | Enumeration(Mono-fuel, Bi-fuel, Flex-fuel) | - - |

Vehicle Fuel Type as reported in

point 3.2.2.4. Appendix 3 of Annex I

(Reg. (EU) 2017/1151)

52 | Fuel Type fuel 1, fuel 2 (if relevant) | Enumeration (Petrol, Diesel, LPG, NG/Biomethane, Ethanol (E85), Hydrogen). | - - |

Fuel Type as reported in point 3.2.2.1.

Appendix 3 of Annex I (Reg. (EU) 2017/1151). In the case of Bi-fuel and Flex-fuel vehicle list both fuels.

53 | Transmission type | Enumeration (Manual, Automatic, CVT) | - - | Transmission Type as reported in point 4.5.1. Appendix 3 of Annex I (Reg. (EU) 2017/1151)

54 | Engine Capacity | Number | cm3 | Engine Capacity as reported in point 3.2.1.3. Appendix 3 of Annex I (Reg. (EU) 2017/1151).

55 | Method of engine fuelling fuel 1, fuel 2 (if relevant) | Enumeration Direct/Indirect/Direct and Indirect | | Method of engine fuelling as declared by OEM. point 1.10.2 of Addendum to Appendix 4 of Annex I (Reg. (EU) 2017/1151

Field | Type of data | Description

TVV | Text |

Unique identifier of the Type, Variant, Version of the vehicle

point 7.3 and 7.4 of Part B of Annex I (Regulation (EU) 2018/858)

PEMS Family ID | Text | Annex IIIA, point 3.5.2.

Make | Text |

Trade name of manufacturer

point 0.1 Annex I (Regulation (EU) 2020/683)

Commercial name | Text |

Commercial names of the TVV

point 0.2.1 Annex I (Regulation (EU) 2020/683)

Other name | Text | Free text

Category and class | Enumeration (M1, N1 class I, N1 class II, N1 class III, N2, N3, M2, M3) |

Category and class of vehicle

715/2007 Annex I (Class)

2018/858 Annex I (Categories)

Bodywork |

Enumeration (AA Saloon;

AB Hatchback,

AC Station Wagon,

AD Coupe,

AE Convertible,

AF Multi-purpose vehicle

AG Truck station wagon

BA Lorry,

BB Van,

BC Tractor unit for semi-trailer

BD Road tractor

BE Pick-up track

BX Chassis-cab or chassis-cowl)

Type of bodywork

0.3.0.2 Annex I (Regulation (EU) 2020/683)

Emission TA Number | Text | Annex IV of Regulation (EU) 2020/683

WVTA Number | Text | Identifier of the Whole Vehicle Type-Approval as defined in Annex IV of Regulation (EU) 2020/683

Evap family ID | Text | As reported in Annex I, Appendix 3, point 0.2.3.7. (Reg. (EU) 2017/1151)

Rated Engine Power fuel 1, fuel 2 (if relevant) | Number | Annex I, Appendix 3, point 3.2.1.8. (Reg. (EU) 2017/1151)

Twin tires | Yes/No | Declared by OEM

Fuel Tank Capacities (discreet values) | Number |

Fuel tank(s) capacity(ies)

point 3.2.3.1.1 of Annex I (Regulation (EU) 2020/683)

Sealed tank | Yes/No | 3.2.12.2.5.5.3 of Annex I (Regulation (EU) 2020/683)

WMI used in this WVTA+TVV | Text | Declared by the OEM (ISO 3779)