Information document no.:
Issue:
Date of issue:
Date of Amendment:
pursuant to …
Battery system or representative battery subsystem type:
…
GENERAL
0.1. Name and address of manufacturer
0.2. Make (trade name of manufacturer):
0.3. Battery system type:
0.4. -
0.5. Battery system type as separate technical unit
0.6. Commercial name(s) (if available):
0.7. Means of identification of model, if marked on the Battery system:
0.8. In the case of components and separate technical units, location and method of affixing of the EC approval mark:
0.9. Name(s) and address(es) of assembly plant(s):
0.10. Name and address of the manufacturer's representative:
General
1.1. Complete system or representative subsystem:
1.2. HPBS / HEBS:
1.3. Principle technical specifications:
1.4. Cell chemistry:
1.5. Number of cells in series:
1.6. Number of cells in parallel:
1.7. Representative junction box with fuses and breakers included in tested system (yes/no):
1.8. Representative serial connectors included in the tested system (yes/no):
Conditioning system
2.1. Liquid / air / other t.b.s.:
2.2. Description of the system:
2.3. Principle drawing(s):
2.4. Temperature boundary limits (min/max): K
2.5. At reference position:
2.6. Flow rates (min/max): ltr/min
Documented values from component testing
3.1. Round trip efficiency for CoP (**):
3.2. Maximum discharge current for CoP:
3.3. Maximum charge current for CoP:
3.4. Testing temperature (target operating temperature declared):
3.5. Conditioning system (indicate for each test run performed)
3.5.1. Cooling or heating required:
3.5.2. Maximum available cooling or heating power:
No.: | Description: | Date of issue:
1 | Information on Battery system test conditions … |
2 | … |
Information on test conditions (if applicable)
1.1 | …