26 Appendix 2, Regulation (EU) 2022/1379

In forcesince 5 Jul 2022

Information document no.:

Issue:

Date of issue:

Date of Amendment:

pursuant to …

Electric machine system type / family (if applicable):

…

0.

GENERAL

0.1. Name and address of manufacturer

0.2. Make (trade name of manufacturer):

0.3. Electric machine system type:

0.4. Electric machine system family:

0.5. Electric machine system type as separate technical unit / Electric machine system family as separate technical unit

0.6. Commercial name(s) (if available):

0.7. Means of identification of model, if marked on the Electric machine system:

0.8. In the case of components and separate technical units, location and method of affixing of the EC approval mark:

0.9. Name(s) and address(es) of assembly plant(s):

0.10. Name and address of the manufacturer's representative:

|Parent EMS | |Family members

|or EMS type | |

| | | #1 | | #2 | | #3 | |

1.

General

1.1. Test voltage(s): V

1.2. Basic motor rotational speed: 1/min

1.3. Motor output shaft maximum speed: 1/min

1.4. (or by default) reducer/gearbox outlet shaft speed: 1/min

1.5. Maximum power speed: 1/min

1.6. Maximum power: kW

1.7. Maximum torque speed: 1/min

1.8. Maximum torque: Nm

1.9. Maximum 30 minutes power: kW

2.

Electric machine

2.1. Working principle

2.1.1. Direct current (DC)/alternating current (AC):

2.1.2. Number of phases:

2.1.3. Excitation / separate / series / compound:

2.1.4. Synchron / asynchron:

2.1.5. Rotor coiled / with permanent magnets / with housing:

2.1.6. Number of poles of the motor:

2.2. Rotational inertia: kgm2

3.

Power controller

3.1. Make:

3.2. Type:

3.3. Working principle:

3.4. Control principle: vectorial / open loop / closed / other (t.b.s.):

3.5. Maximum effective current supplied to the motor: A

3.6. For maximum duration of: s

3.7. DC voltage range used (from / to): V

3.8. DC/DC converter is part of the electric machine system in accordance with paragraph 4.1 of this Annex (yes/no):

4.

Cooling system

4.1. Motor (liquid / air / other t.b.s.):

4.2. Controller (liquid / air / other t.b.s.):

4.3. Description of the system:

4.4. Principle drawing(s):

4.5. Temperature boundary limits (min/max): K

4.6. At reference position:

4.7. Flow rates (min/max): ltr/min

5.

Documented values from component testing

5.1. Efficiency figures for CoP [determined in accordance with points 4.3.5 and 4.3.6 of this Annex]:

5.2. Cooling system (declaration for each cooling circuit):

5.2.1. maximum coolant mass flow or volume flow or maximum inlet pressure:

5.2.2. maximum coolant temperatures:

5.2.3. maximum available cooling power:

5.2.4. Recorded average values for each test run

5.2.4.1. coolant volume flow or mass flow:

5.2.4.2. coolant temperature at the inlet of the cooling circuit:

5.2.4.3. coolant temperature at the inlet and outlet of the test bed heat exchanger on the side of the EMS:

No.: | Description: | Date of issue:

1 | Information on EMS test conditions … |

2 | … |

Information on test conditions (if applicable)

1.1 | …