1.1 Classification of vehicles of category N
[EMS - European Modular System] [In these vehicle classes tractors are treated as rigid lorries but with specific curb weight of tractor] [Sub-group ‘v’ of vehicle groups 4, 5, 9 and 10: these mission profiles are exclusively applicable to vocational vehicles TTractor RRigid lorry & standard body T1, T2Standard trailers STStandard semitrailer DStandard dolly]
Description of elements relevant to the classification in vehicle groups | Vehicle group | Allocation of mission profile and vehicle configuration
Axle configuration | Chassis configuration | Technically permissible maximum laden mass (tons) | Long haul | Long haul EMS | Regional delivery | Regional delivery EMS | Urban delivery | Municipal utility | Construction
4 × 2 | Rigid lorry (or tractor) | > 7,4 – 7,5 | 1s | | | R | | R | |
Rigid lorry (or tractor) | > 7,5 – 10 | 1 | | | R | | R | |
Rigid lorry (or tractor) | > 10 – 12 | 2 | R + T1 | | R | | R | |
Rigid lorry (or tractor) | > 12 – 16 | 3 | | | R | | R | |
Rigid lorry | > 16 | 4 | R + T2 | | R | | R | R |
Tractor | > 16 | 5 | T + ST | T + ST + T2 | T + ST | T + ST + T2 | T + ST | |
Rigid lorry | > 16 | 4v | | | | | | R | R
Tractor | > 16 | 5v | | | | | | | T + ST
4 × 4 | Rigid lorry | > 7,5 – 16 | (6) |
Rigid lorry | > 16 | (7) |
Tractor | > 16 | (8) |
6 × 2 | Rigid lorry | all weights | 9 | R + T2 | R + D + ST | R | R + D + ST | | R |
Tractor | all weights | 10 | T + ST | T + ST + T2 | T + ST | T + ST + T2 | | |
Rigid lorry | all weights | 9v | | | | | | R | R
Tractor | all weights | 10v | | | | | | | T + ST
6 × 4 | Rigid lorry | all weights | 11 | R + T2 | R + D + ST | R | R + D + ST | | R | R
Tractor | all weights | 12 | T + ST | T + ST + T2 | T + ST | T + ST + T2 | | | T + ST
6 × 6 | Rigid lorry | all weights | (13) |
Tractor | all weights | (14) |
8 × 2 | Rigid lorry | all weights | (15) |
8 × 4 | Rigid lorry | all weights | 16 | | | | | | | R
8 × 6 8 ×8 | Rigid lorry | all weights | (17) |
8 × 2 8 × 4 8 × 6 8 × 8 | Tractor | all weights | (18) |
5 axles, all configurations | Rigid lorry or tractor | all weights | (19) |
[EMS - European Modular System RStandard body IVan with its integrated body FWDFront wheel driven RWDSingle driven axle which is not the front axle AWDMore than a single driven axle]
Description of elements relevant to the classification in vehicle groups | Allocation of mission profile and vehicle configuration
Axle configuration | Chassis configuration | Vehicle group | Long haul | Long haul EMS | Regional delivery | Regional delivery EMS | Urban delivery | Municipal utility | Construction
FWD / 4 × 2F | Rigid Lorry (or tractor) | (51) | | | | | | |
Van | (52) | | | | | | |
RWD / 4 × 2 | Rigid Lorry (or tractor) | 53 | | | R | | R | |
Van | 54 | | | I | | I | |
AWD / 4 × 4 | Rigid Lorry (or tractor) | (55) | | | | | | |
Van | (56) | | | | | | |
1.2. Classification of vehicles of category M
1.2.1. Heavy buses
1.2.2. Classification of primary vehicles
[‘P’ indicates the primary stage of the classification; the two numbers separated by the slash indicate the numbers for vehicle groups the vehicle can be allocated in the complete or completed stage.] [‘Low floor’ means vehicle codes ‘CE’, ‘CF’, ‘CG’, ‘CH’, as set out in point 3 of part C of Annex I to Regulation (EU) 2018/858. ‘High floor’ means vehicle codes ‘CA’, ‘CB’, ‘CC’, ‘CD’, as set out in point 3 of part C of Annex I to Regulation (EU) 2018/858.] [‘SD’ means single deck vehicle, ‘DD’ means double deck.]
Description of elements relevant to the classification in vehicle groups | Vehicle group | Allocation of generic body | Vehicle sub-group | Allocation of mission profile
Number of axles | Artic-ulated | Low floor (LF) / High floor (HF) | Number of decks | Heavy Urban | Urban | Suburban | Interurban | Coach
2 | no | P31/32 | LF | SD | P31 SD | x | x | x | x |
DD | P31 DD | x | x | x | |
HF | SD | P32 SD | | | | x | x
DD | P32 DD | | | | x | x
3 | no | P33/34 | LF | SD | P33 SD | x | x | x | x |
DD | P33 DD | x | x | x | |
HF | SD | P34 SD | | | | x | x
DD | P34 DD | | | | x | x
yes | P35/36 | LF | SD | P35 SD | x | x | x | x |
DD | P35 DD | x | x | x | |
HF | SD | P36 SD | | | | x | x
DD | P36 DD | | | | x | x
4 | no | P37/38 | LF | SD | P37 SD | x | x | x | x |
DD | P37 DD | x | x | x | |
HF | SD | P38 SD | | | | x | x
DD | P38 DD | | | | x | x
yes | P39/40 | LF | SD | P39 SD | x | x | x | x |
DD | P39 DD | x | x | x | |
HF | SD | P40 SD | | | | x | x
DD | P40 DD | | | | x | x
1.2.3. Classification of complete vehicles or completed vehicles
The classification of complete or completed vehicles that are heavy buses is based on the following six criteria:
Number of axles;
Vehicle code as set out in Annex I, part C, point 3, to Regulation (EU) 2018/858;
Class of vehicle in accordance with paragraph 2 of UN Regulation No. 107 [UN Regulation No. 107 of the Economic Commission for Europe of the United Nations (UNECE) – Uniform provisions concerning the approval of category M2 or M3 vehicles with regard to their general construction (OJ L 52, 23.2.2018, p. 1).];
Low entry vehicle (‘yes/no’ information derived from vehicle code and type of axle) to be determined according the decision flow shown in Figure 1;
Number of passengers in lower deck from the Certificate of Conformity as set out in Annex VIII to Commission Implementing Regulation (EU) 2020/683 [Commission Implementing Regulation (EU) 2020/683 of 15 April 2020 implementing Regulation (EU) 2018/858 of the European Parliament and of the Council with regards to the administrative requirements for the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (OJ L 163, 26.5.2020, p. 1).] or equivalent documents in the case of individual vehicle approval;
Height of the integrated body to be determined in accordance with Annex VIII.
The corresponding classification to be used is given in Tables 4, 5 and 6.
[In accordance with Regulation (EU) 2018/858.] [In accordance with paragraph 2 of UN Regulation No. 107.]
Description of elements relevant to the classification in vehicle groups | Vehicle group |
Allocation of
mission profile
Number of Axles |
Chassis configuration
(explanation only)
Vehicle Code | Class of vehicle |
Low Entry
(Vehicle Code CE or CG only)
Passenger seats in lower deck (Vehicle Code CB or CD only) | Height of the integrated body in [mm] (Vehicles Class ‘II+III’ only)
I |
I
+II
or
A
II |
II
+III
III
or
B
Heavy Urban | Urban | Suburban | Interurban | Coach
2 | rigid | LF | SD | CE | x | x | x | | | no | — | — | 31a | x | x | x | |
x | x | | | | yes | — | — | 31b1 | x | x | x | |
x | | | yes | — | — | 31b2 | x | x | x | x |
DD | CF | x | x | x | | | — | — | — | 31c | x | x | x | |
open top | SD | CI | x | x | x | x | x | — | — | — | 31d | x | x | x | |
DD | CJ | x | x | x | x | x | — | — | — | 31e | x | x | x | |
HF | SD | CA | | | x | | | — | — | — | 32a | | | | x | x
x | | — | — | ≤ 3100 | 32b | | | | x | x
x | | — | — | > 3100 | 32c | | | | x | x
x | — | — | — | 32d | | | | x | x
DD | CB | | | x | x | x | — | ≤ 6 | — | 32e | | | | x | x
x | x | x | — | > 6 | — | 32f | | | | x | x
[In accordance with Regulation (EU) 2018/858.] [In accordance with paragraph 2 of UN Regulation No. 107.]
Description of elements relevant to the classification in vehicle groups | Vehicle group |
Allocation of
mission profile
Number of Axles |
Chassis configuration
(explanation only)
Vehicle Code | Class of vehicle |
Low Entry
(Vehicle Code CE or CG only)
Passenger seats in lower deck (Vehicle Code CB or CD only) | Height of the integrated body in [mm] (Vehicles Class ‘II+III’ only)
I |
I
+II
or
A
II |
II
+ III
III
or
B
Heavy Urban | Urban | Suburban | Interurban | Coach
3 | rigid | LF | SD | CE | x | x | x | | | no | — | — | 33a | x | x | x | |
x | x | | | | yes | — | — | 33b1 | x | x | x | |
x | | | yes | — | — | 33b2 | x | x | x | x |
DD | CF | x | x | x | | | — | — | — | 33c | x | x | x | |
open top | SD | CI | x | x | x | x | x | — | — | — | 33d | x | x | x | |
DD | CJ | x | x | x | x | x | — | — | — | 33e | x | x | x | |
HF | SD | CA | | | x | | | — | — | — | 34a | | | | x | x
x | | — | — | ≤ 3100 | 34b | | | | x | x
x | | — | — | > 3100 | 34c | | | | x | x
x | — | — | — | 34d | | | | x | x
DD | CB | | | x | x | x | — | ≤ 6 | — | 34e | | | | x | x
x | x | x | — | > 6 | — | 34f | | | | x | x
articu-lated | LF | SD | CG | x | x | x | | | no | — | — | 35a | x | x | x | |
x | x | | | | yes | — | — | 35b1 | x | x | x | |
x | | | yes | — | — | 35b2 | x | x | x | x |
DD | CH | x | x | x | | | — | — | — | 35c | x | x | x | |
HF | SD | CC | | | x | | | — | — | — | 36a | | | | x | x
x | | — | — | ≤ 3100 | 36b | | | | x | x
SD | | | | x | | — | — | > 3100 | 36c | | | | x | x
x | — | — | — | 36d | | | | x | x
DD | CD | | | x | x | x | — | ≤ 6 | — | 36e | | | | x | x
x | x | x | — | > 6 | — | 36f | | | | x | x
[In accordance with Regulation (EU) 2018/858.] [In accordance with paragraph 2 of UN Regulation No. 107.]
Description of elements relevant to the classification in vehicle groups | Vehicle group |
Allocation of
mission profile
Number of Axles |
Chassis configuration
(explanation only)
Vehicle Code | Class of vehicle |
Low Entry
(Vehicle Code CE or CG only)
Passenger seats in lower deck (Vehicle Code CB or CD only) | Height of the integrated body in [mm] (Vehicles Class ‘II+III’ only)
I |
I
+II
or
A
II |
II
+III
III
or
B
Heavy Urban | Urban | Suburban | Interurban | Coach
4 | rigid | LF | SD | CE | x | x | x | | | no | — | — | 37a | x | x | x | |
x | x | | | | yes | — | — | 37b1 | x | x | x | |
x | | | yes | — | — | 37b2 | x | x | x | x |
DD | CF | x | x | x | | | — | — | — | 37c | x | x | x | |
open top | SD | CI | x | x | x | x | x | — | — | — | 37d | x | x | x | |
DD | CJ | x | x | x | x | x | — | — | — | 37e | x | x | x | |
HF | SD | CA | | | x | | | — | — | — | 38a | | | | x | x
x | | — | — | ≤ 3100 | 38b | | | | x | x
x | | — | — | > 3100 | 38c | | | | x | x
x | — | — | — | 38d | | | | x | x
DD | CB | | | x | x | x | — | ≤ 6 | — | 38e | | | | x | x
x | x | x | — | > 6 | — | 38f | | | | x | x
articu-lated | LF | SD | CG | x | x | x | | | no | — | — | 39a | x | x | x | |
x | x | | | | yes | — | — | 39b1 | x | x | x | |
x | | | yes | — | — | 39b2 | x | x | x | x |
DD | CH | x | x | x | | | — | — | — | 39c | x | x | x | |
HF | SD | CC | | | x | | | — | — | — | 40a | | | | x | x
x | | — | — | ≤ 3100 | 40b | | | | x | x
SD | | | | x | | — | — | > 3100 | 40c | | | | x | x
x | — | — | — | 40d | | | | x | x
DD | CD | | | x | x | x | — | ≤ 6 | — | 40e | | | | x | x
x | x | x | — | > 6 | — | 40f | | | | x | x
2.1. For heavy buses the vehicle specifications of the complete vehicle or completed vehicle including properties of the final bodywork and auxiliary units shall be reflected in the results for CO2 emissions and fuel consumption. In the case of heavy buses built in steps, more than a single manufacturer may be involved in the process of generation of input data and input information and the operation of the simulation tool. For heavy buses the CO2 emissions and fuel consumption shall be based on the following two different simulations:
for the primary vehicle;
for the complete vehicle or completed vehicle.
2.2. If a heavy bus is approved by a manufacturer as a complete vehicle, the simulations shall be performed for both the primary vehicle and the complete vehicle.
2.3. For the primary vehicle the input to the simulation tool covers input data regarding the engine, transmission, tyres and input information for a subset of auxiliary units [Input information and input data as defined in Annex III for primary vehicles.]. The classification into vehicle groups is performed in accordance with Table 3 based on the number of axles and the information whether the vehicle is an articulated bus or not. In the simulations for the primary vehicle the simulation tool allocates a set of four different generic bodies (high floor and low floor, single deck and double deck bodywork) and simulates the 11 mission profiles as listed in Table 3 for each vehicle group for two different loading conditions. This leads to a set of 22 results for CO2 emissions and fuel consumption for a primary heavy bus. The simulation tool produces the vehicle information file for the initial step (VIF1), which contains all necessary data to be handed over to the subsequent manufacturing step. The VIF1 comprises all non-confidential input data, the results for energy consumption [The results for CO2 emissions and fuel consumption do not need to be submitted via the VIF, as this information can be calculated from results for energy consumption and the known fuel type.] in [MJ/km], information on the primary manufacturer and the relevant hashes [The content of the VIF is specified in detail in Annex IV, Part III.].
2.4. The manufacturer of the primary vehicle shall make the VIF1 available to the manufacturer responsible for the subsequent manufacturing step. Where a manufacturer of a primary vehicle provides data going beyond the primary vehicle requirements as set out in Annex III, this data does not influence the simulation results for the primary vehicle but is written into the VIF1 to be considered in later steps. For a primary vehicle the simulation tool furthermore produces a manufacturer’s records file.
2.5. In the case of an interim vehicle, the interim manufacturer is responsible for a sub-set of relevant input data and input information for the final bodywork [Subset for input information and input data as defined in Annex III for complete and completed vehicles.]. An interim manufacturer does not apply for certification of the completed vehicle. An interim manufacturer shall add or update information relevant for the completed vehicle and operate the simulation tool to produce an updated and hashed version of the vehicle information file (VIFi) [‘i’ represents the number of manufacturing steps involved in the process so far.]. The VIFi shall be made available to the manufacturer responsible for the subsequent manufacturing step. For interim vehicles the VIFi also covers the task of documentation towards approval authorities. No simulations of CO2 emissions and/or fuel consumption are performed on interim vehicles.
2.6. If a manufacturer performs modifications to an interim, complete or completed vehicle, which would require updates to the input data or the input information allocated to the primary vehicle (e.g. a change of an axle or of tyres), the manufacturer performing the modification acts as a primary vehicle manufacturer with the corresponding responsibilities.
2.7. For a complete or completed vehicle the manufacturer shall complement and, if necessary, update the input data and input information for the final bodywork as transmitted in the VIFi from the previous manufacturing step and shall operate the simulation tool to calculate the CO2 emissions and fuel consumption. For the simulations at this stage, heavy buses are classified based on the six criteria set out in point 1.2.3 into the vehicle groups as listed in Tables 4, 5 and 6. To determine CO2 emissions and fuel consumption of complete vehicles or completed vehicles that are heavy buses the simulation tool performs the following calculation steps:
2.7.1. Step 1 - Selection of the primary vehicle sub-group which matches the bodywork of the complete or completed vehicle (e.g. ‘P34 DD’ for ‘34f’) and making available the corresponding results for energy consumption from the primary vehicle simulation.
2.7.2. Step 2 - Performing simulations to quantify the influence of the bodywork and auxiliaries of the complete vehicle or completed vehicle compared to the generic bodywork and auxiliaries, as considered in the simulations for the primary vehicle regarding energy consumption. In these simulations, generic data are used for the set of primary vehicle data, which are not part of the information transfer between different manufacturing steps as provided by the VIF [See Annex IV, Part III, point 1.1.].
2.7.3. Step 3 - Combining energy consumption results from the primary vehicle simulation as made available by step 1 with the results from step 2 provides the energy consumption results of the complete or completed vehicle. The details of this calculation step are documented in the user manual of the simulation tool.
2.7.4. Step 4 - Results for CO2 emissions and fuel consumption of the vehicle are calculated based on the results of step 3 and the generic fuel specifications as stored in the simulation tool. Steps 2, 3 and 4 are performed separately for each combination of mission profile as listed in the Tables 4, 5 and 6 for the vehicle groups in both low and representative loading condition.
2.7.5. For a complete vehicle or completed vehicle the simulation tool produces a manufacturer’s records file, a customer information file as well as a VIFi. The VIFi shall be made available to the subsequent manufacturer in the event the vehicle undergoes a further step to be completed.
Figure 2 shows the data flow based on the example of a vehicle produced in five CO2 related manufacturing steps.