Regulation (EU) 2025/1706
Commission Implementing Regulation (EU) 2025/1706 of 25 July 2025 laying down rules, procedures and testing methodologies for the application of Regulation (EU) 2024/1257 as regards exhaust and evaporative emission type-approval of vehicles of categories M1 and N1 and amending Implementing Regulation (EU) 2020/683
In forceTyperegulationDate25 Jul 2025Since20 Dec 2025Articles22Versions held96Cited by6 documentsLast changed23 Jul 2026
- 1Scope
- 2Definitions
- 3Requirements for emission type-approval
- 4Requirements for emission type-approval regarding the OBD system
- 5Requirements for emission type-approval regarding on-board fuel and electric energy consumption monitoring d
- 6Application for emission type-approval of a vehicle
- 7Administrative provisions for emission type-approval of a vehicle
- 8Amendments to emission type-approvals
- 9Conformity of production
- 10In-service conformity of exhaust emissions and evaporative emissions
- 10aIn-service conformity of in-vehicle battery durability
- 10bIn-service conformity of electric range at low temperature
- 10cIn-service conformity of system power
- 11Pollution control devices
- 12Application for emission type-approval of a type of replacement control device as a separate technical unit
- 13Administrative provisions for emission type-approval of replacement pollution control device as a separate
- 14Manipulation devices and manipulation strategies
- 15Gear Shift Indicator
- 16Anti-tampering, security and cybersecurity
- 17Specific administrative provisions for emission type-approval
- 18Amendments to Implementing Regulation (EU) 2020/683
- 19Entry into force
- 1 LIST OF ANNEXES
- ANNEX I ADMINISTRATIVE PROVISIONS FOR EMISSION TYPE-APPROVAL
- 3 Appendix 1
- 4 Appendix 2
- 5 Appendix 3 MODEL Information document No …
- 6 Appendix 4 MODEL OF EU TYPE-APPROVAL CERTIFICATE (Maximum format: A4 (210 × 297 mm)) EU TYPE-APPROVAL CERTIF
- 7 Addendum to EU type-approval certificate No … concerning the type-approval of a vehicle with regard to exhau
- 8 Appendix 5
- 9 Appendix 6 Emission level and Emission Type-Approval Certification Numbering System and Certificate of Confo
- 10 Appendix 7
- 11 Appendix 8a Test reports
- 12 Appendix 8b Road Load Test Report
- 13 Appendix 8c Template for test sheet
- 14 Appendix 8d Evaporative Emission Test Report
- 15 Appendix 8e System power test report
- ANNEX II IN-SERVICE CONFORMITY METHODOLOGY
- ANNEX III VERIFYING REAL DRIVING EMISSIONS (RDE)
- 18 Appendix 1 Manufacturer’s declaration of compliance with the Real Driving Emissions requirements
- ANNEX IV MANIPULATION DEVICES AND MANIPULATION STRATEGIES
- 20 Appendix 1 Methodology for the assessment and approval of AES and BES
- 21 Appendix 2 DOCUMENTATION PACKAGES
- ANNEX V VERIFYING EMISSIONS OF CRANKCASE GASES (TYPE 3 TEST)
- 23 Appendix 1 MANUFACTURER’S DECLARATION OF COMPLIANCE WITH THE TYPE 3 REQUIREMENTS
- ANNEX VI DETERMINATION OF EVAPORATIVE EMISSIONS (TYPE 4 TEST)
- ANNEX VII VERIFYING THE DURABILITY OF THE EMISSION CONTROL SYSTEMS (TYPE 5 TEST)
- 26 Appendix 1 MANUFACTURER’S DECLARATION OF COMPLIANCE WITH THE TYPE 5 REQUIREMENTS
- ANNEX VIII VERIFYING THE AVERAGE EMISSIONS AT LOW AMBIENT TEMPERATURES (TYPE 6 TEST)
- ANNEX IX SPECIFICATIONS OF REFERENCE FUELS
- ANNEX X GEAR SHIFT INDICATOR (GSI)
- ANNEX XI ON-BOARD DIAGNOSTICS (OBD) FOR MOTOR VEHICLES
- 31 Appendix 1 MANUFACTURER’S DECLARATION OF COMPLIANCE WITH THE OBD REQUIREMENTS FOR THE PURPOSES OF TYPE-APPR
- 32 ANNEX XII TYPE-APPROVAL OF VEHICLES FITTED WITH ECO-INNOVATIONS AND DETERMINATION OF CO2 EMISSIONS AND FUEL
- 33 ANNEX XIII EMISSION TYPE-APPROVAL OF REPLACEMENT POLLUTION CONTROL DEVICES AS SEPARATE TECHNICAL UNIT
- 34 Appendix 1 MODEL
- 35 Appendix 2 MODEL EU TYPE-APPROVAL CERTIFICATE (Maximum format: A4 (210 mm × 297 mm)) EU TYPE-APPROVAL CERTI
- 36 Appendix 3 Model of emission type-approval marks (see point 3.2 of this Annex)
- ANNEX XIV ANTI-TAMPERING, SECURITY AND CYBERSECURITY
- 38 Appendix 1 HIGH-LEVEL VULNERABILITIES/THREATS, EXAMPLES OF VULNERABILITIES OR ATTACK METHODS, AND EXAMPLES
- 39 Appendix 2 MANUFACTURER’S DECLARATION OF COMPLIANCE WITH THE ANTI-TAMPERING, SECURITY AND CYBERSECURITY REQ
- ANNEX XV IN-VEHICLE BATTERY DURABILITY
- 41 Appendix 1 In-service conformity methodology for in-vehicle battery durability
- 42 Appendix 2 Manufacturer’s declaration of compliance with the in-vehicle battery durability requirements
- 43 ANNEX XVI REQUIREMENTS FOR VEHICLES THAT USE A REAGENT FOR THE EXHAUST AFTER-TREATMENT SYSTEM
- 44 Appendix 1 MANUFACTURER’S DECLARATION OF COMPLIANCE WITH THE REAGENT REQUIREMENTS
- ANNEX XVII ELECTRIC RANGE AT LOW TEMPERATURE
- 46 Appendix 1 Optional in-service conformity methodology for electric range at low temperature
- ANNEX XVIII AMENDMENTS TO IMPLEMENTING REGULATION (EU) 2020/683
- ANNEX XIX SYSTEM POWER DETERMINATION
- 49 Appendix 1 Optional methodology for in-service conformity assessment of system power determination
- 50 ANNEX XX MEASUREMENTS OF NET POWER AND THE MAXIMUM 30 MINUTES POWER OF ELECTRIC DRIVE TRAINS
- ANNEX XXI WORLD HARMONIZED LIGHT VEHICLE TEST PROCEDURE (WLTP) – (TYPE 1 TEST)
- 52 Appendix 1 MANUFACTURER’S DECLARATION FOR THE AMBIENT TEMPERATURE CORRECTION TEST (ATCT)
- 53 Appendix 2 MANUFACTURER’S DECLARATION FOR THE REGENERATION REQUIREMENTS
- 54 ANNEX XXII DEVICES FOR MONITORING ON BOARD THE VEHICLE, THE CONSUMPTION OF FUEL AND ELECTRIC ENERGY
Source: EU legislation in force, consolidated versions and treaties (Cellar, Publications Office). Official publication. Reuse: Reuse authorised (Commission Decision 2011/833/EU).