Art. 13 Regulation (EU) 2025/1706

Administrative provisions for emission type-approval of replacement pollution control device as a separate technical unit

In forcesince 25 Jul 2025
1.

If the requirements laid down in Annex XIII to this Regulation are met, the type-approval authority shall grant an emission type-approval for replacement pollution control devices as separate technical unit and issue an emission type-approval number in accordance with the numbering system set out in Annex IV to Regulation (EU) 2020/683.

The approval authority shall not assign the same number to another replacement pollution control device type.

The same type-approval number may cover the use of that replacement pollution control device type on a number of different vehicle types.

2.

For the purposes of paragraph 1, the approval authority shall issue an emission type-approval certificate established in accordance with the model set out in Appendix 2 to Annex XIII.

3.

If the applicant for emission type-approval is able to demonstrate to the approval authority or technical service that the replacement pollution control device is of a type indicated in Section 2.3 of the Addendum to Annex A2 of UN Regulation No 154, the granting of a type-approval shall not depend on verification of compliance with the requirements specified in Section 4 of Annex XIII to this Regulation.