The manufacturer shall submit to the approval authority an application for emission type-approval of a type of replacement pollution control device as a separate technical unit.
The application shall be drawn up in accordance with the model of the information document set out in Appendix 1 to Annex XIII.
In addition to the requirements laid down in paragraph 1, the manufacturer shall submit to the technical service responsible for the emission type-approval test all of the following:
a vehicle or vehicles of a type that is approved in accordance with Regulation (EU) 2024/1257 equipped with a new original equipment pollution control device;
one sample of the type of the replacement pollution control device;
an additional sample of the type of the replacement pollution control device, in the case of a replacement pollution control device intended to be fitted to a vehicle equipped with an OBD system.
For the purposes of paragraph 2, point (a), the test vehicles shall be selected by the applicant with the agreement of the technical service.
The test vehicles shall comply with the requirements set out in Section 2.3. of Annex B6 to UN Regulation No 154.
The test vehicles shall meet all of the following requirements:
they shall have no emission control system defects;
any excessively worn out or malfunctioning emission-related original parts shall be repaired or replaced;
they shall be tuned properly and set to manufacturer's specification prior to emission testing.
For the purposes of paragraph 2, points (b) and (c), the sample shall be clearly and indelibly marked with the applicant's trade name or mark and its commercial designation.
For the purposes of paragraph 2, point (c), the sample shall have been deteriorated in accordance with Annex C4 to UN Regulation No 154.