Emission type-approval shall be granted under Regulation (EU) 2024/1257 only if the requirements of Commission Implementing Regulation (EU) 2025/1707 [Commission Implementing Regulation (EU) 2025/1707 of 25 July 2025 laying down rules for the application of Regulation (EU) 2024/1257 of the European Parliament and of the Council as regards specific methods, requirements and tests, including compliance thresholds, for OBFCM devices and OBM systems, characteristics and performance of driver warning systems and inducement methods and methods to assess their operation, EVP format and data and methods of communication of EVP data of motor vehicles of categories M1 and N1 (OJ L, 2025/1707, 22.8.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/1707/oj).] are also complied with.
Emission type-approval for vehicles constructed and placed on the market by small-volume manufacturers and ultra-small-volume manufacturers as provided for in Article 8 of Regulation (EU) 2024/1257 shall be granted in accordance with Articles 4 and 5 of Regulation (EC) No 715/2007 and Implementing Regulation (EU) 2017/1151.
For vehicles type-approved in accordance with this Regulation that shall be designated as ‘Euro 7- TEMP’ vehicles, the requirements and dates of Table 1 of Appendix 6 of Annex I to this Regulation, shall apply.
For vehicle types with an existing valid type-approval issued in accordance with emission level ‘Euro 6e’ under the provisions of Regulation (EC) No 715/2007 that comply with the applicable dates of Appendix 6 of Annex I to Regulation (EU) 2017/1151 and for which a manufacturer requests an emission type-approval in order to designate new vehicles to be compliant to the emission standards, as specified in Table 1 of Appendix 6 of Annex I to this Regulation, new type-approval testing shall not be required if:
the manufacturer declares to the granting type-approval authority that compliance with the requirements of this Regulation is ensured; and
the technical service responsible for the testing agrees that the previous type-approved test results can be used for the preparation of a new emission test report to demonstrate compliance to the Euro 7 requirements.
Requirements not related to the testing of the vehicle, including required declarations and data requirements, shall apply.