Art. 4 Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 200…

Manufacturers’ obligations

In forcesince 20 Jun 2007cited 75×
1.

Manufacturers shall demonstrate that all new vehicles sold, registered or put into service in the Community are type approved in accordance with this Regulation and its implementing measures. Manufacturers shall also demonstrate that all new replacement pollution control devices requiring type approval which are sold or put into service in the Community are type approved in accordance with this Regulation and its implementing measures.

These obligations include meeting the emission limits set out in Annex I and the implementing measures referred to in Article 5.

2.

Manufacturers shall ensure that type approval procedures for verifying conformity of production, durability of pollution control devices and in-service conformity are met.

In addition, the technical measures taken by the manufacturer must be such as to ensure that the tailpipe and evaporative emissions are effectively limited, pursuant to this Regulation, throughout the normal life of the vehicles under normal conditions of use. Therefore, in-service conformity measures shall be checked for a period of up to five years or 100000 km, whichever is the sooner. Durability testing of pollution control devices undertaken for type approval shall cover 160000 km. To comply with this durability test, the manufacturers should have the possibility to make use of test bench ageing, subject to the implementing measures referred to in paragraph 4.

In-service conformity shall be checked, in particular, for tailpipe emissions as tested against emission limits set out in Annex I. In order to improve control of evaporative emissions and low ambient temperature emissions, the test procedures shall be reviewed by the Commission.

3.

Manufacturers shall set out carbon dioxide emissions and fuel consumption figures in a document given to the purchaser of the vehicle at the time of purchase.

4.

The specific procedures and requirements for the implementation of paragraphs 2 and 3 shall be established in accordance with the procedure referred to in Article 15(2).

The 10 that are cited most themselves, of 75.

  • BGH, Urteil vom 26. Juni 2023 - VIa ZR 335/21Decision

    … März 2023, aaO, Rn. 80). Die in Art. 4 Abs. 3 der Verordnung (EG) Nr. 715/2007 vorgesehene Pflicht des Herstellers, dem Fahrzeugkäufer beim Kauf ein Schriftstück mit Angaben über die Kohlendioxidemissionen und den Kraftstoffverbrauch …

    26 Jun 2023 · KORE304452023

  • Judgment of the Court (Second Chamber) of 17 December 2020. CLCV and Others (Defeat device on diesel engines).Decision

    Article 4(1) and (2) of the regulation states: ‘1. Manufacturers shall demonstrate that all new vehicles sold, registered or put into service in the Community are type approved in accordance with this Regulation and its implementing …

    17 Dec 2020 · 62018CJ0693

  • Commission Regulation (EU) No 566/2011 of 8 June 2011 amending Regulation (EC) No 715/20…Law

    … 1.], και ιδίως το άρθρο 4 παράγραφος 4, το άρθρο 5 παράγραφος 3 και το άρθρο 8, Έχοντας υπόψη την οδηγία 2007/46/ΕΚ του Ευρωπαϊκού …

  • Judgment of the Court (Grand Chamber) of 14 July 2022. GSMB Invest GmbH & Co. KG v Auto Krainer GesmbH.Decision

    That interpretation is borne out by the context of Article 3(10) of Regulation No 715/2007. Under Article 4(2) of that regulation, technical measures adopted by the manufacturer must be such as to ensure, in particular, that tailpipe …

    14 Jul 2022 · 62020CJ0128

  • Judgment of the Court (Grand Chamber) of 21 March 2023. QB v Mercedes-Benz Group AG.Decision

    Article 4(1) to (3) of that regulation states: ‘1. Manufacturers shall demonstrate that all new vehicles sold, registered or put into service in the Community are type approved in accordance with this Regulation and its implementing …

    21 Mar 2023 · 62021CJ0100

  • Judgment of the Court (Grand Chamber) of 14 July 2022. DS v Porsche Inter Auto GmbH & Co KG and Volkswagen AG.Decision

    Lastly, Article 4(1) of Regulation No 715/2007 provides that manufacturers are to demonstrate that all new vehicles sold, registered or put into service in the European Union are type approved in accordance with that regulation and its …

    14 Jul 2022 · 62020CJ0145

  • Judgment of the Court (Grand Chamber) of 14 July 2022. IR v Volkswagen AG.Decision

    That court observes that, for most of the year, temperatures in Austria are below 15 °C. It notes that it is not possible to determine whether the temperature window is necessary in order to protect the engine against damage. It also …

    14 Jul 2022 · 62020CJ0134

  • Judgment of the Court (Fifth Chamber) of 1 August 2025. CM and DS v Volkswagen AG.Decisioninterprets

    Article 4(1) and (2) of that regulation provides: ‘1. Manufacturers shall demonstrate that all new vehicles sold, registered or put into service in the [European] Community are type approved in accordance with this Regulation and its …

    1 Aug 2025 · 62023CJ0666

  • OGH 26.08.2025, 9Ob92/25gDecision

    … Art. 4 Abs. 1 und Art. 5 Abs. 2 der Verordnung Nr. 715/2007 sowie Art. 10 Abs. 1 der Verordnung (EG) Nr. 692/2008 der Kommission vom 18. Juli 2008 zur Durchführung und Änderung der Verordnung Nr. 715/2007 in der durch die Verordnung (EU) …

    26 Aug 2025 · JJT_20250826_OGH0002_0090OB00092_25G0000_000

  • Judgment of the Court (Grand Chamber) of 8 November 2022. Deutsche Umwelthilfe eV v Bundesrepublik Deutschland.Decision

    Article 4(1) and (2) of that regulation states: ‘1. Manufacturers shall demonstrate that all new vehicles sold, registered or put into service in the Community are type approved in accordance with this Regulation and its implementing …

    8 Nov 2022 · 62019CJ0873