The following information, if applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance shall be supplied.
0.1. Make (trade name of manufacturer): …
0.2. Type: …
0.2.1. Commercial name(s), if available: …
0.5. Name and address of manufacturer: …
Name and address of authorised representative, if any: …
0.7. In the case of components and separate technical units, location and method of affixing of the EU approval mark: …
0.8. Address(es) of assembly plant(s): …
1.1. Make and type of the replacement pollution control device: …
1.2. Drawings of the replacement pollution control device, identifying in particular all the characteristics referred to under Article 3(5) of this Regulation:
1.3. Description of the vehicle type or types with regard to emissions for which the replacement pollution control device is intended: …
1.3.1. Number(s) and/or symbol(s) characterising the engine and vehicle type(s) with regard to emissions: …
1.3.2. Is the replacement pollution control device intended to be compatible with OBD requirements (Yes/No) [Delete where not applicable.]
1.4. Description and drawings showing the position of the replacement pollution control device relative to the engine exhaust manifold(s): …