5 Appendix 3 MODEL Information document No …, Regulation (EU) 2025/1706

In forcesince 23 Jul 2026

The information laid down in Annex A1 to UN Regulation No 154, where applicable, shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.

Additionally, the information in the following sections, where applicable, shall be supplied.

0.2.2.1. Allowed Parameter Values for multistage type-approval to use the base vehicle emission, consumption and/or range values (insert range if applicable):

Final Vehicle actual mass (in kg): …

Final Vehicle technically permissible maximum laden mass (in kg): …

Frontal area for final vehicle (in cm2): … Rolling resistance (kg/t): …

Cross-sectional area of air entrance of the front grille (in cm2): …

0.2.3.3. PEMS family: …

0.5. Name and address of the manufacturer

3.2.15.1. Type-approval number according to Regulation (EC) No 661/2009 (2) or Regulation (EU) 2019/2144 (3): …

3.2.16.1. Type-approval number according to Regulation (EC) No 661/2009 or Regulation (EU) 2019/2144: …

3.2.18.1. EC type-approval number in accordance with Regulation (EC) No 79/2009 (4) or Regulation (EU) 2019/2144: …

3.2.19. H2NG fuelling system: yes/no (1)

3.2.19.1. Percentage of hydrogen in the fuel (the maximum specified by the manufacturer): …

3.2.19.2. Number of the type-approval certificate issued in accordance with UN Regulation No 110 (5): …

3.2.19.3 Electronic engine management control unit for H2NG fuelling

3.2.19.3.1. Make(s): …

3.2.19.3.2. Type(s): …

3.2.19.3.3. Emission-related adjustment possibilities: …

3.2.19.4. Further documentation

3.2.19.4.2. System lay-out (electrical connections, vacuum connections compensation hoses, etc.): …

3.2.19.4.3. Drawing of the symbol: …

3.5. Manufacturer’s declared values for determination of CO2 emissions/fuel consumption/electric consumption/electric range and details of eco-innovations (where applicable) (6)

3.5.7.7. System Power (manufacturer’s declared values) (where applicable)

3.5.7.7.1. Peak Vehicle System Power: ... kW

3.5.7.7.2. Sustained Vehicle System Power: ... kW

3.5.7.8. Usable Battery Energy of the vehicle at certification (UBEcertified): … (Wh)

3.5.8. Vehicle fitted with an eco-innovation within the meaning of Article 11 of Regulation (EU) 2019/631 (7) for M1 or N1 vehicles: yes/no (1)

3.5.8.1. Type/Variant/Version of the baseline vehicle as referred to in Article 4 of Regulation (EU) 2023/2767 (8) (if applicable): …

3.5.8.2. Existence of interactions between different eco-innovations: yes/no (1)

3.5.8.3. Emissions data related to the use of eco-innovations (repeat the table for each reference fuel tested) (9)

Decision approving the eco- inno vation (10) | Code of the eco- innova tion (11) |

1.

CO2

emissions of the baseline vehicle (g/ km)

2.

CO2

emissions of the eco-innovation vehicle (g/km)

3.

CO2

emissions of the baseline vehicle under type 1 test- cycle (12)

4.

CO2

emissions of the eco-innovation vehicle under type 1 test-cycle

5.

Usage factor (UF),

i.e. temporal share of technology usage in normal operation conditions

CO2 emissions savings ((1 – 2) – (3 – 4))*5

xxx/20xx | | | | | | |

Total WLTP CO2 emissions saving (g/km) (13)

9 BODYWORK

9.1 Type of bodywork using the codes defined in Part C of Annex I of Regulation (EU) 2018/858: …

(1)

Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).

(2)

OJ L 200, 31.7.2009, p. 1.

(3)

OJ L 325, 16.12.2019, p. 1.

(4)

Reference to Regulation (EC) No 79/2009.

(5)

Reference to UN Regulation No 110.

(6)

Determined in accordance with the requirements of Council Directive 80/1268/EEC (OJ L 375, 31.12.1980, p. 36).

(7)

Reference to Regulation (EU) 2019/631.

(8)

Reference to Regulation (EU) 2023/2767.

(9)

Expand the table if necessary, using one extra row per eco-innovation.

(10)

Number of the Commission Decision approving the eco-innovation.

(11)

Assigned in the Commission Decision approving the eco-innovation.

(12)

Under agreement of the type-approval authority, if a modelling methodology is applied instead of the type 1 test cycle, this value shall be the one provided by the modelling methodology.

(13)

Sum of the CO2 emissions savings of each individual eco-innovation.