Prior to routine use of this test method, laboratories should demonstrate technical proficiency by correctly identifying the ocular corrosivity classification of the 8 chemicals recommended in Table 1. These chemicals were selected to represent the range of responses for local eye irritation/corrosion, which is based on results in the in vivo rabbit eye test (TG 405, TM B.5(5)) (i.e., Categories 1, 2A, 2B, or no classification according to the UN GHS). However, considering the validated usefulness of the FL assay (i.e., to identify ocular corrosives/severe irritants only), there are only two test outcomes for classification purposes (corrosive/severe irritant or non-corrosive/non-severe irritant) to demonstrate proficiency. Other selection criteria were that chemicals are commercially available, there are high quality in vivo reference data available, and there are high quality data from the FL test method. For this reason, the proficiency chemicals were selected from the “Fluorescein Leakage Assay Background Review Document as an Alternative Method for Eye Irritation Testing” (8), which was used for the retrospective validation of the FL test method.
Abbreviations: CAS NR = Chemical Abstracts Service Registry Number
[Chemical classes were assigned to each test chemical using a standard classification scheme, based on the National Library of Medicine Medical Subject Headings (MeSH) classification system (available at http//www.nlm.nih.gov/mesh)] [Based on results from the in vivo rabbit eye test (OECD TG 405, TM B.5) and using the UN GHS and EU CLP.] [Based on results obtained with FL (INVITTOX Protocol No. 71(6))]
Chemical | CAS NR | Chemical Class | Physical Form | In Vivo Classification | In Vitro Classification
Benzalkonium chloride (5 %) | 8001-54-5 | Onium compound | Liquid | Category 1 | Corrosive/Severe Irritant
Promethazine hydrochloride | 58-33-3 | Amine/Amidine, Heterocyclic, Organic sulphur compound | Solid | Category 1 | Corrosive/Severe Irritant
Sodium hydroxide (10 %) | 1310-73-2 | Alkali | Liquid | Category 1 | Corrosive/Severe Irritant
Sodium lauryl sulfate (15 %) | 151-21-3 | Carboxylic acid (salt) | Liquid | Category 1 | Corrosive/Severe Irritant
4-carboxy-benzaldehyde | 619-66-9 | Carboxylic acid, Aldehyde | Solid | Category 2(A) | Non-corrosive/Non-severe irritant
Ammonium nitrate | 6484-52-2 | Inorganic salt | Solid | Category 2(A) | Noncorrosive/Non-severe irritant
Ethyl-2-methylaceto-acetate | 609-14-3 | Ketone, Ester | Liquid | Category 2(B) | Noncorrosive/Non-severe irritant
Glycerol | 56-81-5 | Alcohol | Liquid | No Category | Noncorrosive/Non-severe irritant