Take-off climb
All engines operating
The steady gradient of climb after take-off must be at least 4 % with:
(A) take-off power on each engine;
(B) the landing gear extended except that if the landing gear can be retracted in not more than 7 seconds, it may be assumed to be retracted;
(C) the wing flaps in the take-off position(s); and
(D) a climb speed not less than the greater of 1,1 VMC and 1,2 VS1.
One engine inoperative
The steady gradient of climb at an altitude of 400 ft above the take-off surface must be measurably positive with:
(A) the critical engine inoperative and its propeller in the minimum drag position;
(B) the remaining engine at take-off power;
(C) the landing gear retracted;
(D) the wing flaps in the take-off position(s); and
(E) a climb speed equal to that achieved at 50 ft.
The steady gradient of climb must be not less than 0,75 % at an altitude of 1500 ft above the take-off surface with:
(A) the critical engine inoperative and its propeller in the minimum drag position;
(B) the remaining engine at not more than maximum continuous power;
(C) the landing gear retracted;
(D) the wing flaps retracted; and
(E) a climb speed not less than 1,2 VS1.
Landing climb
All engines operating
The steady gradient of climb must be at least 2,5 % with:
(A) not more than the power or thrust that is available eight seconds after initiation of movement of the power controls from the minimum flight idle position;
(B) the landing gear extended;
(C) the wing flaps in the landing position; and
(D) a climb speed equal to VREF.
One engine inoperative
The steady gradient of climb must be not less than 0,75 % at an altitude of 1500 ft above the landing surface with:
(A) the critical engine inoperative and its propeller in the minimum drag position;
(B) the remaining engine at not more than maximum continuous power;
(C) the landing gear retracted;
(D) the wing flaps retracted; and
(E) a climb speed not less than 1,2 VS1.