This Appendix indicates the assessment of conformity of the rolling stock subsystem.
The sub-system characteristics to be assessed in the different phases of design, development and production are marked by X in Table H.1. A cross in column 4 of Table H.1 indicates that the relevant characteristics shall be verified by testing each single subsystem.
1 | 2 | 3 | 4 | 5
Characteristics to be assessed, as specified in clause 4.2 of this TSI | Design and development phase | Production phase | Particular assessment procedure
Design review | Type Test | Routine Test
Element of the Rolling Stock sub-system | Clause | | | | Clause
Structure and mechanical parts | 4.2.2 |
Inner coupling | 4.2.2.2.2 | X | n.a. | n.a. | —
End coupling | 4.2.2.2.3 | X | n.a. | n.a. | —
IC automatic centre buffer coupler | 5.3.1 | X | X | X | —
IC manual end coupling | 5.3.2 | X | X | X | —
Rescue coupling | 4.2.2.2.4 | X | X | n.a. | —
IC rescue coupling | 5.3.3 | X | X | X |
Staff access for coupling and uncoupling | 4.2.2.2.5 | X | X | n.a. | —
Gangways | 4.2.2.3 | X | X | n.a. | —
Strength of vehicle structure | 4.2.2.4 | X | X | n.a. | —
Passive safety | 4.2.2.5 | X | X | n.a. | —
Lifting and jacking | 4.2.2.6 | X | X | n.a. | —
Fixing of devices to carbody structure | 4.2.2.7 | X | n.a. | n.a. | —
Staff and freight access doors | 4.2.2.8 | X | X | n.a. | —
Mechanical characteristics of glass | 4.2.2.9 | X | n.a. | n.a. | —
Load conditions and weighted mass | 4.2.2.10 | X | X | X | 6.2.3.1
Track interaction and gauging | 4.2.3 |
Gauging | 4.2.3.1 | X | n.a. | n.a. | —
Wheel load | 4.2.3.2.2 | X | X | n.a | 6.2.3.2
Rolling Stock characteristics for compatibility with train detection systems | 4.2.3.3.1 | X | X | X | —
Axle bearing condition monitoring | 4.2.3.3.2 | X | X | n.a. | —
Safety against derailment running on twisted track | 4.2.3.4.1 | X | X | n.a. | 6.2.3.3
Running dynamic behaviour requirements | 4.2.3.4.2 a) | X | X | n.a. | 6.2.3.4
Active systems – safety requirement | 4.2.3.4.2 b) | X | n.a. | n.a. | 6.2.3.5
Limit values for running safety | 4.2.3.4.2.1 | X | X | n.a. | 6.2.3.4
Track loading limit values | 4.2.3.4.2.2 | X | X | n.a. | 6.2.3.4
Equivalent conicity | 4.2.3.4.3 | X | n.a. | n.a. | —
Design values for new wheel profiles | 4.2.3.4.3.1 | X | n.a. | n.a. | 6.2.3.6
In-service values of wheelset equivalent conicity | 4.2.3.4.3.2 | X | | | —
Structural design of bogie frame | 4.2.3.5.1 | X | X. | n.a. | —
Mechanical and geometrical characteristics of wheelsets | 4.2.3.5.2.1 | X | X | X | 6.2.3.7
Mechanical and geometrical characteristics of wheels | 4.2.3.5.2.2 | X | X | X | —
Wheels (IC) | 5.3.2 | X | X | X | 6.1.3.1
Automatic variable gauge systems | 4.2.3.5.3 | X | X | X | 6.2.3.7a
Automatic variable gauge systems (IC) | 5.3.4a | X | X | X | 6.1.3.1a
Minimum curve radius | 4.2.3.6 | X | n.a. | n.a. | —
Life guards | 4.2.3.7 | X | n.a. | n.a. | —
Braking | 4.2.4 |
Functional requirements | 4.2.4.2.1 | X | X | n.a | —
Safety requirements | 4.2.4.2.2 | X | n.a | n.a | 6.2.3.5
Type of brake system | 4.2.4.3 | X | X | n.a | —
Brake command | 4.2.4.4 |
Emergency braking | 4.2.4.4.1 | X | X | X | —
Service braking | 4.2.4.4.2 | X | X | X | —
Direct braking command | 4.2.4.4.3 | X | X | X | —
Dynamic braking command | 4.2.4.4.4 | X | X | n.a | —
Parking braking command | 4.2.4.4.5 | X | X | X | —
Braking performance | 4.2.4.5 |
General requirements | 4.2.4.5.1 | X | n.a | n.a | —
Emergency braking | 4.2.4.5.2 | X | X | X | 6.2.3.8
Service braking | 4.2.4.5.3 | X | X | X | 6.2.3.9
Calculations related to thermal capacity | 4.2.4.5.4 | X | n.a | n.a | —
Parking brake | 4.2.4.5.5 | X | n.a | n.a | —
Limit of wheel rail adhesion profile | 4.2.4.6.1 | X | n.a | n.a | —
Wheel slide protection system | 4.2.4.6.2 | X | X | n.a | 6.2.3.10
Wheel slide protection system (IC) | 5.3.5 | X | X | X | 6.1.3.2
Interface with traction — Braking systems linked to traction (electric, hydro-dynamic) | 4.2.4.7 | X | X | X | —
Braking system independent of adhesion conditions | 4.2.4.8 |
General | 4.2.4.8.1. | X | n.a | n.a | —
Magnetic track brake | 4.2.4.8.2. | X | X | n.a | —
Eddy current track brake | 4.2.4.8.3 | X | X | n.a. | —
Brake state and fault indication | 4.2.4.9 | X | X | X | —
Brake requirements for rescue purposes | 4.2.4.10 | X | X | n.a | —
Passenger related items | 4.2.5 |
Sanitary systems | 4.2.5.1 | X | n.a | n.a | 6.2.3.11
Audible communication system | 4.2.5.2 | X | X | X | —
Passenger alarm | 4.2.5.3 | X | X | X | —
Passenger alarm – safety requir. | 4.2.5.3 | X | n.a | n.a | 6.2.3.5
Communication devices for passengers | 4.2.5.4 | X | X | X | —
Exterior doors: access to and egress from Rolling Stock | 4.2.5.5 | X | X | X | —
Exterior doors – safety requir. | 4.2.5.5 | X | n.a | n.a | 6.2.3.5
Exterior door system construction | 4.2.5.6 | X | n.a | n.a | —
inter-unit doors | 4.2.5.7 | X | X | n.a | —
Internal air quality | 4.2.5.8 | X | n.a | n.a | 6.2.3.12
Body side windows | 4.2.5.9 | X | | | —
Environmental conditions and aerodynamic effects | 4.2.6 |
Environmental conditions | 4.2.6.1 |
Temperature | 4.2.6.1.1 | X | n.a. X (1) | n.a. | —
Snow, ice and hail | 4.2.6.1.2 | X | n.a. X (1) | n.a. | —
Type test if and as defined by the Applicant.
Aerodynamic effects | 4.2.6.2 |
Slipstream effects on passengers on platform and on workers trackside | 4.2.6.2.1 | X | X | n.a. | 6.2.3.13
Head pressure pulse | 4.2.6.2.2 | X | X | n.a. | 6.2.3.14
Maximum pressure variations in tunnels | 4.2.6.2.3 | X | X | n.a. | 6.2.3.15
Cross wind | 4.2.6.2.4 | X | n.a | n.a. | 6.2.3.16
External lights & visible and audible warning devices | 4.2.7 |
External front and rear lights | 4.2.7.1 |
Head lights
IC
4.2.7.1.1
5.3.6
X | X | n.a | -6.1.3.3
Marker lights
IC
4.2.7.1.2
5.3.7
X | X | n.a | -6.1. 3.4
Tail lights
IC
4.2.7.1.3
5.3.8
X | X | n.a | -6.1.3.5
Lamp controls | 4.2.7.1.4 | X | X | n.a | —
Horn | 4.2.7.2 |
General – warning sound
IC
4.2.7.2.1
5.3.9
X | X | n.a | -6.1.3.6
Warning horn sound pressure levels |
4.2.7.2.2
5.3.9
X | X | n.a |
6.2.3.17
6.1.3.6
Protection | 4.2.7.2.3 | X | n.a | n.a | —
Control | 4.2.7.2.4 | X | X | n.a | —
Traction and electrical equipment | 4.2.8 |
Traction performance | 4.2.8.1 |
General | 4.2.8.1.1 |
Requirements on performance | 4.2.8.1.2 | X | n.a | n.a | —
Power supply | 4.2.8.2 |
General | 4.2.8.2.1 | X | n.a | n.a | —
Operation within range of voltages and frequencies | 4.2.8.2.2 | X | X | n.a | —
Regenerative brake with energy to the overhead contact line | 4.2.8.2.3 | X | X | n.a | —
Maximum power and current from the overhead contact line | 4.2.8.2.4 | X | X | n.a | 6.2.3.18
Maximum current at standstill for DC systems | 4.2.8.2.5 | X | X | n.a | —
Power factor | 4.2.8.2.6 | X | X | n.a | 6.2.3.19
System energy disturbances | 4.2.8.2.7 | X | X | n.a | —
Energy consumption measuring function | 4.2.8.2.8 | X | X | n.a | —
Requirements linked to pantograph | 4.2.8.2.9 | X | X | n.a | 6.2.3.20 & 21
Pantograph (IC) | 5.3.10 | X | X | X | 6.1.3.7
Contact strips (IC) | 5.3.11 | X | X | X | 6.1.3.8
Electrical protection of the train
IC Main circuit breaker
4.2.8.2.10
5.3.12
X | X | n.a | —
Diesel and other thermal traction system | 4.2.8.3 | — | — | — | Other Directive
Protection against electrical hazards | 4.2.8.4 | X | X | n.a | —
Cab and operation | 4.2.9 |
Driver's Cab | 4.2.9.1 | X | n.a | n.a | —
General | 4.2.9.1.1 | X | n.a | n.a | —
Access and egress | 4.2.9.1.2 | X | n.a | n.a | —
Access and egress in operating conditions | 4.2.9.1.2.1 | X | n.a | n.a | —
Driver's cab emergency exit | 4.2.9.1.2.2 | X | n.a | n.a | —
External visibility | 4.2.9.1.3 | X | n.a | n.a | —
Front visibility | 4.2.9.1.3.1 | X | n.a | n.a | —
Rear and side view | 4.2.9.1.3.2 | X | n.a | n.a | —
Interior layout | 4.2.9.1.4 | X | n.a | n.a | —
Driver's seat
IC
4.2.9.1.5
5.3.13
X
X
n.a
X
n.a
X
—
Driver's desk- Ergonomics | 4.2.9.1.6 | X | n.a | n.a | —
Climate control and air quality | 4.2.9.1.7 | X | X | n.a | 6.2.3.12
Internal lighting | 4.2.9.1.8 | X | X | n.a | —
Windscreen-Mechanical characteristics | 4.2.9.2.1 | X | X | n.a | 6.2.3.22
Windscreen-Optical characteristics | 4.2.9.2.2 | X | X | n.a | 6.2.3.22
Windscreen-Equipment | 4.2.9.2.3 | X | X | n.a | —
Driver machine interface | 4.2.9.3 |
Driver's activity control function | 4.2.9.3.1 | X | X | X | —
Speed indication | 4.2.9.3.2 | — | — | — | —
Driver display unit and screens | 4.2.9.3.3 | X | X | n.a | —
Controls and indicators | 4.2.9.3.4 | X | X | n.a | —
Labelling | 4.2.9.3.5 | X | n.a | n.a | —
Radio remote control function by staff for shunting operation | 4.2.9.3.6 | X | X | n.a | —
Onboard tools and portable equipment | 4.2.9.4 | X | n.a | n.a | —
Storage facility for staff personal effects | 4.2.9.5 | X | n.a | n.a | —
Recording device | 4.2.9.6 | X | X | X | —
Fire safety and evacuation | 4.2.10 |
General and categorisation | 4.2.10.1 | X | n.a | n.a | —
Measures to prevent fire | 4.2.10.2 | X | X | n.a | —
Measures to detect/control fire | 4.2.10.3 | X | X | n.a | —
Requirements related to emergencies | 4.2.10.4 | X | X | n.a | —
Requirements related to evacuation | 4.2.10.5 | X | X | n.a | —
Servicing | 4.2.11 |
Cleaning of driver's cab windscreen | 4.2.11.2 | X | X | n.a | —
Connection to toilet discharge system
IC
4.2.11.3
5.3.14
X | n.a | n.a | —
Water refilling equipment | 4.2.11.4 | X | n.a | n.a | —
Interface for water refilling
IC
4.2.11.5
5.3.15
X | n.a | n.a | —
Special requirements for stabling of trains | 4.2.11.6 | X | X | n.a | —
Refuelling equipment | 4.2.11.7 | X | n.a | n.a | —
Train interior cleaning – power supply | 4.2.11.8 | X | n.a | n.a | —
Documentation for operation and maintenance | 4.2.12 |
General | 4.2.12.1 | X | n.a | n.a | —
General documentation | 4.2.12.2 | X | n.a | n.a | —
Documentation related to maintenance | 4.2.12.3 | X | n.a | n.a | —
The maintenance design justification file | 4.2.12.3.1 | X | n.a | n.a | —
The Maintenance description file | 4.2.12.3.2 | X | n.a | n.a | —
Operating documentation | 4.2.12.4 | X | n.a | n.a | —
Lifting diagram and instructions | 4.2.12.4 | X | n.a | n.a | —
Rescue related descriptions | 4.2.12.5 | X | n.a | n.a | —