2 Appendix D, Regulation (EU) 2019/776

In forcesince 16 May 2019

TSI | Standard/document

Characteristics to be assessed | References to Standard or document | Clauses

Structure and mechanical part | 4.2.2 |

Strength of unit | 4.2.2.2 | EN 12663-2:2010 | 5

EN 15877-1:2012 | 4.5.14

6.2.2.1 | EN 12663-1:2010+A1:2014 | 9.2

EN 12663-2:2010 | 6, 7

Gauging and track interaction | 4.2.3 |

Gauging | 4.2.3.1 | EN 15273-2:2013 | all

Compatibility with load carrying capacity of lines | 4.2.3.2 | EN 15528:2015 | 6.1, 6.2

Compatibility with train detection systems | 4.2.3.3 | ERA/ERTMS/033281 rev. 4.0 | See table 7 of this TSI

Axle bearing condition monitoring | 4.2.3.4 | EN 15437-1:2009 | 5.1, 5.2

Safety against derailment running on twisted track | 4.2.3.5.1 | — | —

6.2.2.2 | EN 14363:2016 | 4, 5, 6.1

Running dynamic behaviour | 4.2.3.5.2 | EN 14363:2016 | 4, 5, 7

6.1.2.1 | EN 14363:2016 | 4, 5, 7

6.2.2.3 | EN 16235:2013 | all

6.1.2.1 | EN 13749:2011 | 6.2

Structural design of bogie frame | 4.2.3.6.1 | EN 13749:2011 | 6.2

6.1.2.1 | EN 13749:2011 | 6.2

Characteristics of wheelsets | 4.2.3.6.2 | — | —

6.1.2.2 | EN 13260:2009+A1:2010 | 3.2.1

Characteristics of wheels | 4.2.3.6.3 | — | —

6.1.2.3 |

EN 13979-1:2003+A1:2009

+A2:2011

7, 6.2

Characteristics of axles | 4.2.3.6.4 | — | —

6.1.2.4 | EN 13103:2009 + A2:2012 | 4, 5, 6, 7

Axle boxes/bearings | 4.2.3.6.5 | — | —

6.2.2.4 | EN 12082:2007+A1:2010 | 6

Running gear for manual change of wheelsets | 4.2.3.6.7 | — | —

6.2.2.5 | UIC leaflet 430-1:2012 | Annexes B, H, I

UIC 430-3:1995 | Annex 7

Brake | 4.2.4 |

Service brake | 4.2.4.3.2.1 | EN 14531-6:2009 | all

UIC 544-1:2014 | all

Parking brake | 4.2.4.3.2.2 | EN 14531-6:2009 | 6

Friction element for wheel tread brakes | 4.2.4.3.5 | — | —

6.1.2.5 |

ERA technical document ERA/TD/2013-02/INT

Version 3.0 of 27.11.2015

All

Environmental conditions | 4.2.5 |

Environmental conditions | 4.2.5 | EN 50125-1:2014 | 4.7

6.2.2.7 | — | —

System protection | 4.2.6 |

Barriers | 4.2.6.1.2.1 | — | —

6.2.2.8.1 | EN 1363-1:2012 | all

Materials | 4.2.6.1.2.2 | — | —

6.2.2.8.2 | ISO 5658- 2:2006/Am1:2011 | all

EN 13501-1:2007+A1:2009 | all

EN 45545-2:2013+A1:2015 | Table 6

ISO 5660-1:2015 | all

Cables | 6.2.2.8.3 | EN 50355:2013 | all

EN 50343:2014 | all

Flammable liquids | 6.2.2.8.4 | EN 45545-7:2013 | all

Protective measures against indirect contact (protective bonding) | 4.2.6.2. 1 | EN 50153:2014 | 6.4

Protective measures against direct contact | 4.2.6.2. 2 | EN 50153:2014 | 5

Attachment devices for rear-end signal | 4.2.6.3 | EN 16116-2:2013 | Figure 11

Standards or documents referred to in the additional optional conditions set out in Appendix C:

Additional optional conditions for units | App. C | Standard/UIC leaflet/document

Manual coupling system | C.1 | EN 15566:2009+A1:2010 | all (except 4.4)

EN 15551:2009+A1:2010 | all

EN 16116-2:2013 | 6.2.1, 6.3.2

EN 15877-1:2012 | Figure 75

UIC footsteps and handrails | C.2 | EN 16116-2:2013 | 4, 5, 6.2.2

Ability to be hump shunted | C.3 | EN 12663-2:2010 | 5, 8

Tests concerning longitudinal compressive forces | C.8 | EN 15839:2012+A1:2015 | all

UIC brake | C.9 | EN 15355:2008+A1:2010 | all

EN 15611:2008+A1:2010 | all

UIC 540:2014 | all

EN 14531-1:2015 | 4

EN 15624:2008+A1:2010 | all

EN 15625:2008+A1:2010 | all

EN 286-3:1994 | all

EN 286-4:1994 | all

EN 15807:2011 | all

EN 14601:2005+A1:2010 | all

UIC 544-1:2014 | all

UIC 542:2015 | all

UIC 541-4:2010 | all

EN 16241:2014 | 4, 5, 6.3.2 to 6.3.5

EN 15595:2009+A1:2011 | all

Welding | C.12 |

EN 15085-1:2007+A1:2013 EN 15085-2:2007

EN 15085-3:2007

EN 15085-4:2007

EN 15085-5:2007

all

Specific product properties concerning the wheel | C.15 |

EN 13262:2004

+A1:2008+A2:2011

all

EN 13979-1:2003

+A1:2009+A2:2011

all

Tow hooks | C.16 | UIC 535-2:2006 | 1.4

Protective devices on protruding parts | C.17 | UIC 535-2:2006 | 1.3

Label holders and attachment devices for rear end signal | C.18 | UIC 575:1995 | 1