ANNEX X, Regulation (EU) 2015/504

In forcesince 14 Oct 2016

1.1. The placing on the market of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance shall be subject to authorisation in accordance with Article 46(3) of Regulation (EU) No 167/2013.

1.2. Such authorisation shall take the form of a certificate, a model of which is contained in Appendix 1.

1.3. The certificate referred to in point 1.2 shall include prescriptions for construction safety, functional safety and braking performance, as well as for environmental protection and, where needed, for testing standards. They may be based on the Commission Delegated Regulations listed in Annex I to Regulation (EU) No 167/2013, may be developed according to the relevant state of safety, environmental and testing technology, or, if this is an appropriate way of achieving the required safety or environmental objectives, may consist of a comparison of the part or equipment with the environmental or safety performance of the original vehicle, or of any of its parts, as appropriate.

1.4. This Annex shall not be applicable to a part or piece of equipment before it is listed in Annex IX. For any entry or group of entries in Annex IX, a reasonable transitional period shall be fixed to allow the manufacturer of the part or equipment to apply for and obtain an authorisation. At the same time a date may be fixed, where appropriate, to exclude parts and equipment designed for vehicles type-approved before that date from the application of this Annex.

Stamp of approval authority

Communication concerning the

authorisation certificate (1)

extension of authorisation certificate (1)

refusal of authorisation certificate (1)

withdrawal of authorisation certificate (1)

for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of systems that are essential for the safety of the vehicle or for its environmental performance

Kind of part/equipment (1) …

Part/equipment (1) numbers: …

EU authorisation certificate number: …

Reason for extension/refusal/withdrawal (1): …

Name and address of manufacturer: …

Name(s) and address(es) of assembly plant(s): …

Name and address of the manufacturer's representative (if any): …

The part/equipment (1) is specifically intended for installation on the following vehicle(s):

Make (trade name of manufacturer): …

Type(s) (2): …

Variant(s) (2) …

Version(s) (2): …

Prescriptions for:

(a)

vehicle construction safety (1): …

(b)

vehicle functional safety (1): …

(c)

vehicle braking performance (1): …

(d)

vehicle environmental protection (1): …

(e)

testing standards (1): …

Prescriptions based on:

(a)

Annex(es) … (3) to Commission Delegated Regulation (EU) (No) (1) …/… (and Annex(es) … (3) to Commission Delegated Regulation (EU) (No) (1) …/…) (1), as last amended by (Commission Delegated) (1) Regulation (EU) (No) (1) …/… (1) (4) (of the European Parliament and of the Council) (1)

(b)

a comparison of the part/equipment (1) with the safety/environmental (1) performance of the original vehicle/parts of the original vehicle (1) (explain) (1): …

…

Technical service responsible for carrying out the tests: …

Date of test report: …

Number of test report: …

The part/equipment (1) does not/does (1) impair the functioning of those systems that are essential for the safety of the vehicle or its environmental performance.

The authorisation certificate is granted/extended/refused/withdrawn (1)

Place: …

Date: …

Name and signature (or visual representation of an ‘advanced electronic signature’ according to Directive 1999/93/EC of the European Parliament and of the Council, including data for verification): …

…

Attachments:

Test report

(1)

Delete where not applicable.

(2)

Indicate the alphanumeric code Type-Variant-Version or ‘TVV’ allocated to each type, variant and version as set out in point 2.3 of Part B of Annex I to this Regulation. For the identification of variant and versions it may be employed the matrix set out in point 2.2 of Part B of Annex I to this Regulation.

(3)

The Roman numeral of the relevant Annex to the Commission Delegated Regulation or multiple Roman numerals of the relevant Annexes to the same Commission Delegated Regulation.

(4)

Indicate the latest amendment of the Commission Delegated Regulation according to the amendment applied for the EU type-approval.