1.
EU type-approval certificates shall be numbered in accordance with the method set out in this Annex.
2.
The EU type-approval number shall consist of a total of four sections for whole-vehicle type-approvals and five sections for type-approval of systems, components, and separate technical units as detailed below. In all cases, the sections shall be separated by an asterisk (‘*’).
2.1.
Section 1: The lower-case letter ‘e’ followed by the distinguishing number of the Member State issuing the EU type-approval, applicable for all type-approval numbers.
1 | Germany | 19 | Romania
2 | France | 20 | Poland
3 | Italy | 21 | Portugal
4 | The Netherlands | 23 | Greece
5 | Sweden | 24 | Ireland
6 | Belgium | 25 | Croatia
7 | Hungary | 26 | Slovenia
8 | Czech Republic | 27 | Slovakia
9 | Spain | 29 | Estonia
11 | United Kingdom | 32 | Latvia
12 | Austria | 34 | Bulgaria
13 | Luxembourg | 36 | Lithuania
17 | Finland | 49 | Cyprus
18 | Denmark | 50 | Malta
2.2.
Section 2: The number of the applicable Regulation of the European Parliament and of the Council or Commission Delegated Regulation.
2.2.1.
In case of EU whole-vehicle type-approval ‘167/2013’ shall be indicated;
2.2.2.
In the case of national small series whole-vehicle type-approvals in accordance with Article 37 of Regulation (EU) No 167/2013, the letters NKS in block capitals shall precede the ‘167/2013’;
2.2.3. In the case of a system, component or separate technical unit type-approval, the number of the corresponding Commission Delegated Regulation supplementing Regulation (EU) No 167/2013: ‘2015/208’, ‘2015/68’, ‘1322/2014’, ‘2015/96’ or ‘2018/985’ shall be indicated.
2.3.
Section 3: the latest amending Commission Delegated Regulation (e.g. ‘RRR/2016’) followed by the identification code of the system, component or separate technical unit, the stage of implementation and/or the class of the device applicable to the type-approval according to Table 6-1.
2.3.1.
In the case of EU whole-vehicle type-approval, section 3 shall be omitted;
2.3.2.
In the case of EU type-approval of a system, component or separate technical unit, the number of the last amending Commission Delegated Regulation followed with an alphanumerical character as set out in Table 6-1 to clearly identify the type of system, component or separate technical unit shall be indicated.
2.4.
Section 4: Sequential number for type-approval certificates.
A sequential number with leading zeros (as applicable), to denote the type-approval number. The sequential number shall have five digits starting from ‘00001’.
2.5.
Section 5: Sequential number to denote the extension number of the type-approval:
a two-digit sequential number, with leading zero as applicable, starting from ‘00’ for each type-approval number issued.
3.
On the vehicle's statutory plate(s) only, section 5 shall be omitted.
Example of a component unit type-approval of a tyre, which has not yet been extended, issued by France:
e2*2015/208*2015/208M*00003*00
—e2France (section 1)
—2015/208Commission Delegated Regulation (EU) 2015/208 (section 2)
—2015/208Mrepeat the Commission Delegated Regulation (EU) 2015/208 to denote that it has not been amended and the letter ‘M’ to indicate that is a tyre (section 3)
—00003type-approval sequential number (section 4)
—00extension number (section 5)
Example of a vehicle system type-approval of an installation of an engine/engine family, amended by another Commission Delegated Regulation RRR/2016 which has been extended twice, issued by Bulgaria:
e34*2015/96*RRR/2016A*00403*02
—e34Bulgaria (section 1)
—2015/96Commission Delegated Regulation (EU) 2015/96 (section 2)
—RRR/2016Aamending Commission Delegated Regulationn number (RRR/2016) and the letter ‘A’ to indicate that is an installation of an engine/engine family (section 3)
—00403type-approval sequential number (section 4)
—02extension number (section 5)
Example of a national small series whole vehicle type-approval, which has been extended once, issued by Austria and granted in accordance with Article 42 of Regulation (EU) No 167/2013:
e12*NKS167/2013*00001*01
—e12Austria (section 1)
—NKS167/2013Regulation (EU) No 167/2013 precede by the national small-series denominator (section 2)
—00001type-approval sequential number (section 4)
—01extension number (section 5)
Example of a whole vehicle type-approval number, which has been extended five times, issued by the Netherlands:
e4*167/2013*10690*05
—e4the Netherlands (section 1) 167/2013 Regulation (EU) No 167/2013 (section 2)
—167/2013Regulation (EU) No 167/2013 (section 2)
—10690type-approval sequential number (section 4)
—05extension number (section 5)
System or component/separate technical unit (STU) | Commission Delegated Regulation (EU) | alphanumerical character
System: installation of an engine/engine family | 2015/96 | A
System: installation of an Stage V engine/engine family | 2018/985 | A1
System: external sound level | 2015/96 or 2018/985 | B
Component/STU: engine/engine family | 2015/96 | C
Component/STU: Stage V engine/engine family | 2018/985 | C1
System or component/separate technical unit (STU) | Commission Delegated Regulation (EU) | alphanumerical character
System: driver information | 2015/208 | D
System: installation of lighting and light-signalling devices | 2015/208 | E
System: electro-magnetic compatibility | 2015/208 | F
System: installation of audible warning device(s) | 2015/208 | G
System: installation of rear-view mirrors | 2015/208 | H
System: installation of crawler undercarriage | 2015/208 | I
Component/ STU: electro-magnetic compatibility of electrical / electronic sub-assemblies | 2015/208 | J
Component/STU: ballast masses | 2015/208 | K
Component/STU: lateral and/or rear protective structure | 2015/208 | L
Component: tyre | 2015/208 | M
Component/STU: mechanical coupling (dynamic test method) | 2015/208 | ND
Component/STU: mechanical coupling (static test method) | 2015/208 | NS
System or component/separate technical unit (STU) | Commission Delegated Regulation (EU) | alphanumerical character
System: braking | 2015/68 | P
System or component/separate technical unit (STU) | Commission Delegated Regulation (EU) No | alphanumerical character
System: driver's exposure to noise level | 1322/2014 | R
System: seat belt anchorages | 1322/2014 | S
System: protection against hazardous substances | 1322/2014 | T
STU: roll-over protective structure (ROPS) (dynamic testing) | 1322/2014 | U1
STU: roll-over protective structure (ROPS) (track-laying tractors) | 1322/2014 | U2
STU: roll-over protective structure (ROPS) (static testing) | 1322/2014 | U3
STU: roll-over protective structure (ROPS) (front mounted narrow-track tractors, static testing) | 1322/2014 | U4S
STU: roll-over protective structure (ROPS) (front mounted narrow-track tractors, dynamic testing) | 1322/2014 | U4D
STU: roll-over protective structure (ROPS) (rear mounted narrow-track tractors, static testing) | 1322/2014 | U5S
STU: roll-over protective structure (ROPS) (rear mounted narrow-track tractors, dynamic testing) | 1322/2014 | U5D
STU: falling objects protective structure (FOPS) | 1322/2014 | V
Component/STU: driver's seat (Category A — Class I) | 1322/2014 | W1
Component/STU: driver's seat (Category A — Class II) | 1322/2014 | W2
Component/STU: driver's seat (Category A — Class III) | 1322/2014 | W3
Component/STU: driver's seat (Category B) | 1322/2014 | W4
Component/STU: safety belts | 1322/2014 | X
STU: protection against penetrating objects | 1322/2014 | Y