ANNEX VII, Regulation (EU) 2015/504

In forcesince 7 Aug 2018

1.1.

The type-approval authority shall provide and attach to the EU type-approval certificate, in accordance with Article 25(3) of Regulation (EU) No 167/2013, the test results sheet which shall take the form set out in Appendix 1 to this Annex.

1.2.

In each case, the information must make clear to which variant and version it is applicable. One version may not have more than one result. However, a combination of several results per version indicating the worst case is permissible. In the latter case, a note shall state that for items marked (*) only worst case results are given.

Measured in accordance with Annex II to Commission Delegated Regulation (EU) 2018/985, as last amended by Commission Delegated Regulation (EU) …/… (1) (3)

Variant/version: | … | … | …

Moving: | … dB(A) | … dB(A) | … dB(A)

Stationary: | … dB(A) | … dB(A) | … dB(A)

Engine speed: | … min–1 | … min–1 | … min–1

Measured according to:

Commission Delegated Regulation (EU) 2018/985, as last amended by Commission Delegated Regulation (EU) …/… (1) (3): yes/no (1); or

Regulation (EU) 2016/1628 of the European Parliament and of the Council, as last amended by (Commission Delegated) (1) Regulation (EU) …/… (of the European Parliament and of the Council) (1) (4): yes/no (1); or

Regulation (EC) No 595/2009 of the European Parliament and of the Council, as last amended by (Commission Delegated) (1) Regulation (EU) (No) (1) …/… (1) (5) (of the European Parliament and of the Council) (1): yes/no (1); or

Annex 4B to UNECE Regulation No 96.04 series of amendments (OJ L 88, 22.3.2014, p. 1): yes/no (1).

2.1. NRSC (2): … / ESC / WHSC (1) final test results (inclusive of Deterioration Factor) (6):

Variant/Version | … | … | …

CO | … g/kWh | … g/kWh | … g/kWh

HC | … g/kWh | … g/kWh | … g/kWh

NOx | … g/kWh | … g/kWh | … g/kWh

HC + NOx | … g/kWh | … g/kWh | … g/kWh

PM | … g/kWh | … g/kWh | … g/kWh

PN | … #/kWh | … #/kWh | … #/kWh

2.2. Non-road transient test cycle (7): … / ETC / WHTC (1) final test results (inclusive of Deterioration Factor) (8):

Variant/Version | … | … | …

CO | … g/kWh | … g/kWh | … g/kWh

HC | … g/kWh | … g/kWh | … g/kWh

NOx | … g/kWh | … g/kWh | … g/kWh

HC + NOx | … g/kWh | … g/kWh | … g/kWh

PM | … g/kWh | … g/kWh | … g/kWh

PN | … #/kWh | … #/kWh | … #/kWh

Variant/Version | … | … | …

CO2 | … | … | …

Measured according to Annex XIII to Commission Delegated Regulation (EU) No 1322/2014, as last amended by Commission Delegated Regulation (EU) …/… (1) (3)

Variant/version: | … | … | …

Driver's exposure to noise level | … dB(A) | … dB(A) | … dB(A)

Test method used: | | |

Test method 1 in accordance with section 2 of Annex XIII to Commission Delegated Regulation (EU) No 1322/2014 (1) | — | — | —

Test method 2 in accordance with: section 3 of Annex XIII to Commission Delegated Regulation (EU) No 1322/2014 (1) | | |

Measured according to Annex II to Commission Delegated Regulation (EU) 2015/68, as last amended by Commission Delegated Regulation (EU) …/… (1) (3)

[See point 2.1. of Appendix 1 to Annex VII of Regulation (EU) 2015/68.]

Axles of the vehicle | Reference axles

Static mass (P)1 | Braking force needed at wheels | Speed | Test mass (Pe) | Braking force developed at wheels | Speed

kg | N | km/h | kg | N | km/h

Axle 1

Axle 2

Axle 3

Axle 4

Total mass of the vehicle submitted for approval … kg

Braking force needed at wheels … N

Retarding torque needed at main shaft of endurance braking system … Nm

Retarding torque obtained at main shaft of endurance braking system (according to diagram) … Nm

Reference axle … Report No. … Date …

… (copy attached)

Type-I | Type-III

Braking force per axle (N)

(See point 4.2.1. of Appendix 1 to Annex VII to Regulation (EU) 2015/68)

Axle 1

Axle 2

Axle 3

T1 = … % Fe

T2 = … % Fe

T3 = … % Fe

T1 = … % Fe

T2 = … % Fe

T3 = … % Fe

Predicted actuator stroke (mm)

(See point 4.3.1.1. of Appendix 1 to Annex VII to Regulation (EU) 2015/68)

Axle 1

Axle 2

Axle 3

s1 = …

s2 = …

s3 = …

s1 = …

s2 = …

s3 = …

Average thrust output (N)

(See point 4.3.1.2. of Appendix 1 to Annex VII to Regulation (EU) 2015/68)

Axle 1

Axle 2

Axle 3

ThA1 = …

ThA2 = …

ThA3 = …

ThA1 = …

ThA2 = …

ThA3 = …

Braking performance (N)

(See point 4.3.1.4. of Appendix 1 to Annex VII to Regulation (EU) 2015/68)

Axle 1

Axle 2

Axle 3

T1 = …

T2 = …

T3 = …

T1 = …

T2 = …

T3 = …

Type-0 subject towed vehicle test result (E) |

Type-I hot

(predicted)

Type-III hot

(predicted)

Braking performance of vehicle

(See points 2.3.3, 2.4.3 and 2.5.5 of Annex II to Regulation (EU) 2015/68)

(1)

Delete where not applicable.

(2)

For vehicles fitted with engines tested in accordance with a non-road steady-state test cycle, indicate the test cycle in accordance with point 9.1 (Table 4) of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656.

(3)

Indicate the latest amendment of the Commission Delegated Regulation according to the amendment applied for the EU type-approval.

(4)

Indicate only the latest amendment.

(5)

Indicate only the latest amendment in case of an amendment of one or more Articles of Regulation (EU) No 595/2009, according to the amendment applied for the EU type-approval.

(6)

For each engine type fitted on every variant/version, indicate:

(a)

for engines tested in accordance with a non-road steady-state test cycle, copy the ‘Final test result with DF’ results from Table 6 of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656,

(b)

for engines tested on heavy duty test cycles, indicate the final test results (inclusive of Deterioration Factor) of the ESC/WHSC test in accordance with Regulation (EC) No 595/2009.

(7)

For vehicles fitted with engines tested in accordance with a non-road transient test cycle, indicate the test cycle in accordance with point 10.1 (Table 8) of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656.

(8)

For each engine type fitted on every variant/version, indicate:

(a)

for engines tested in accordance with a non-road transient test cycle, copy the ‘Final test result with DF’ results from Table 9 or, as applicable, from Table 10, of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656,

(b)

for engines tested on heavy duty test cycles, indicate the final test results (inclusive of Deterioration Factor) of the ETC/WHTC test in accordance with Regulation (EC) 595/2009.

(9)

For each engine type fitted on every variant/version, indicate:

(a)

for an engine type or engine family that is tested on both the NRSC and a non-road transient test cycle, copy, as applicable, the following values of the template for the single format of the test report set out in Appendix 1 to Annex VI to Implementing Regulation (EU) 2017/656: the hot cycle CO2 emissions values from the NRTC noted in point 10.3.4; the CO2 emissions values from the LSI-NRTC noted in point 10.4.4; or, for an engine only tested on an NRSC, indicate the CO2 emissions values given in that cycle from point 9.3.3,

(b)

for engines tested on heavy duty test cycles, indicate the CO2 result of the ESC/WHSC or ETC/WHTC test in accordance with Regulation (EC) 595/2009.