During the smelting of the scrap, CO-containing gasses are created. Normally the post-combustion of these gases take place outside the furnace. In order to use the heat caused by this burning, it has to take place inside the furnace. The problem is the just-in-time delivery of the necessary oxygen. The solution proposed was to inject oxygen at two levels, as a result of which a current would be established which allowed a better mixing of the gases. Very accurate measuring has to take place in order to establish the right moment for these injections of oxygen. Furthermore, the attempt will be made to let the post-combustion also take place in the foamed slag.
The fractional separation of dust is carried out to filter metals such as zinc. These metal dusts originate during the smelting phase and they will be filtered out before the superheating takes place. Zinc and other metals in concentrated form can be used elsewhere.
The aim of the high-tension regulation is to control the current between the anode and the cathode. Metal lying against the edge of the furnace (so-called 'cold spots`) is not sufficiently heated. This is caused by the fact that only one electrode, instead of three, is used. By using dry anodes instead of watercooled ones, it is expected that the current can be controlled better.
The raising of electric arc voltage is in principle possible in a direct-current EAF. This leads to a higher electrical and thermal efficiency with less consumption of the electrode.
It has, however, to be demonstrated that this principle can be applied in practical operation.
The R & D project can be considered as development within the meaning of Annex I to the Community framework for State aids for research and development (1): '. . . work based on applied research aimed at establishing new or substantially improved products, production processes or services up to but not including industrial application and commercial exploitation. This stage would normally include pilot and demonstration projects . . .`.
The Commission answers the received comments and observations as follows:
BISPA: