, Decision_act (EU) 1995/437

In forcesince 1 Feb 1995
–

post combustion of primary gases resulting from the reactions,

–

the charge of unshredded car scrap in a single-step process (diminution of dioxin and furan emissions),

–

fractional separation of filtration dust,

–

development of high-tension regulation by using dry anodes,

–

raising of the electric arc voltage.

One of the sub-projects (the utilization of iron-bearing dust through a hollow electrode) will only be carried out during two days of the week. Since Georgsmarienhuette will only produce 600 kt of steel a year, it is not necessary to produce for seven days a week, five days being sufficient. The other live sub-projects will be carried out throughout the production process since the pilot character has to be demonstrated under real circumstances.

Those projects together represent the R & D project and they have not previously been performed on a large scale in a combination like this. The outcome in terms of a new development resulting from the combination of the different technical processes is therefore unclear, but if success is achieved, it will have been demonstrated that the total blend of techniques can function under real circumstances.

The demonstrative character of this project consists of two parts. The first one is the blowing into the electric arc furnace (EAF) of iron-bearing dust (waste product of the steel-making process containing 50 % of iron) through a hollow electrode. In fact this amounts to a recycling of waste material, because it becomes possible to win back iron from the dust and to use other elements such as chromium.

The second part is to charge the furnace in a one-step process with non-shredded motor vehicle scrap. This way of charging the EAF is made being possible through an extreme post-combustion of Co-gas and a corresponding adjustment of the voltage between an anode and cathode.

Motor vehicle scrap contains approximately 25 % plastic and other material. This (in a way polluted) scrap can be used in a two-step process (smelting and converting) but here the aim is to use the non-shredded derelict cars as a whole and smelt them right away without creating dioxin-containing gases.