It has to be noted that this is an exception to the rule, since all R & D projects invoke risks. Such a high specific risk has not been adequately demonstrated. The R & D project at stake is a demonstration project showing the functioning of a blend of techniques in real-life conditions. This means that it is already very close to the market-place; consequently, the technical risks are within acceptable limits. Furthermore, if the project demonstrates that the combination of the techniques does not deliver the desired outcome, Georgsmarienhuette will still have a direct-current electric arc furnace that can be adapted to normal standards with a minimum of extra costs. A risk premium of five percentage points is therefore not justified, and the aid intensity should not be higher than 25 %.
Originally, the German authorities sought approval for an aid for R & D of DM 32,46 million on the basis of DM 108,2 million eligible costs and an intensity of 30 %. Owing to the extension of the duration of the project from 36 months to 51 months, these costs were set at DM 109,85 million.
By letter of 11 July 1994 the German authorities informed the Commission of additional wear and tear and consumption costs of DM 13,822 million caused by the utilization of the iron-bearing dusts through the hollow electrode. Since these costs are directly caused by the R & D activity they are eligible for R & D State aid pursuant to Annex II to the Community framework for State aids for research and development. The aid intensity is 25 %.
Since there was no doubt as to the R & D nature of the costs, an extension of the procedure pursuant to Article 6 (4) of the steel aids code was not necessary. The same applies to the costs resulting from the extended duration of the R & D project from 36 to 51 months.
This brings the total costs as notified to DM 123,672 million and the aid to DM 35,9155 million.
Point 8.2 of the Community framework for State aids for research and development requires that the aid for R & D shall lead to additional efforts in the field of R & D. For the beneficiary of the aid it was perfectly possible not to carry out this R & D project and to use the electric arc furnace only for production. The fact that it has chosen to perform this R & D is in itself a proof of additional efforts in this field.