, Decision_act (EU) 1979/90

In forcesince 12 Dec 1978

3 In the paint industry, white lead is used mainly in the manufacture of anti-rust and wood protection paints. Its use has been declining since the fifties, partly because less wood is being used in the building industry, or else the wood that is used does not require the same protection, and partly because of the increasing use of substitute products, particularly titanium oxide, zine oxide, calcium oxide and barium compounds. The disadvantage of paints incorporating white lead is the dangerous vapour given off as the paint is laid on. The substitutes offer the advantage that the paint is both easier to handle and cheaper. But white lead mixed with minium provides the best protection against rust. The use of white lead is consequently (1)OJ No 13, 21.2.1962, p. 204/62. (2)OJ No 127, 20.8.1963, p. 2268/63.

imposed in, for instance, public contracts awarded by the railway authorities. White lead is also still being used to protect wood against weathering, particularly the wooden components of ships.

Over the last 15 years white lead has been used as a stabilizing agent in the manufacture of plastics (PVC). But here again it has been supplanted by other inorganic substances, in particular lead-based products like lead sulphate, lead phosphite and lead phtalate and zinc, barium and calcium compounds. The plastics industry now uses white lead almost exclusively (95 % of use) as a stabilizer in the manufacture of cables.

4 White lead is sold to the plastics industry (35 %) and the paint industry (65 %). As can be seen from the table below, sales declined sharply from 1971 to 1977. >PIC FILE= "T0014459">

Here it should be noted that 1977 was a bad year, not only for the white lead industry in particular but for the paint industry as a whole, and that even sales of substitute products such as titanium oxide, which had earlier experienced a high rate of growth and are now reverting to that trend, fell by 5 %. The table also fails to reflect the fact that the decline in white lead sales is to be attributed not only to increased sales of substitute products by the white lead manufacturers' competitors, but also to the increase in the volume of such products manufactured by the white lead manufacturers themselves.