13 ANNEX Xb, Regulation (EU) 2017/2400

In forcesince 1 Jan 2026

The component test procedures described in this Annex shall produce input data relating to electric machine systems, IEPC, IHPC Type 1, battery systems and capacitor systems for the simulation tool.

For the purposes of this Annex, the following definitions shall apply:

(1)

‘battery control unit’ or ‘BCU’ means an electronic device that controls, manages, detects or calculates electric and thermal functions of the battery system and that provides communication between the battery system or battery pack or part of a battery pack and other vehicle controllers.

(2)

‘battery pack’ means a REESS (rechargeable electric energy storage system) that includes secondary cells or secondary cell assemblies, which are normally connected with cell electronics, power supply circuits and overcurrent shut-off device, including electrical interconnections and interfaces for external systems (examples of external systems are systems intended for thermal conditioning, high voltage and low voltage auxiliary and communication).

(3)

‘battery system’ means a REESS that consists of secondary cell assemblies or battery pack(s) as well as electrical circuits, electronics, interfaces for external systems (e.g. thermal conditioning system), BCUs and contactors.

(4)

‘representative battery subsystem’ means a subsystem of a battery system that consists of either secondary cell assemblies or battery pack(s) in serial and/or parallel configuration with electrical circuits, thermal conditioning system interfaces, control units and cell electronics.

(5)

‘cell’ means a basic functional unit of a battery, consisting of an assembly of electrodes, electrolyte, container, terminals and usually separators, that is a source of electric energy obtained by direct conversion of chemical energy.

(6)

‘cell electronics’ means an electronic device that collects and possibly monitors thermal or electric data of cells or cell assemblies or capacitors or capacitor assemblies and contains electronics for balancing between cells or capacitors, if necessary.

(7)

‘secondary cell’ means a cell which is designed to be electrically recharged by way of a reversible chemical reaction.

(8)

‘capacitor’ means a device for storage of electrical energy achieved by the effects of electrostatic double-layer capacitance and electrochemical pseudo capacitance in an electrochemical cell.

(9)

‘capacitor cell’ means a basic functional unit of a capacitor, consisting of an assembly of electrodes, electrolyte, container, terminals and usually separators.

(10)

‘capacitor control unit’ or ‘CCU’ means an electronic device that controls, manages, detects or calculates electric and thermal functions of the capacitor system and that provides communication between the capacitor system or capacitor pack or part of a capacitor pack and other vehicle controllers.

(11)

‘capacitor pack’ means a REESS that includes capacitor cells or capacitor assemblies normally connected with capacitor cell electronics, power supply circuits and overcurrent shut-off device, including electrical interconnections, interfaces for external systems and CCU. Examples of external systems are thermal conditioning, high voltage and low voltage auxiliary and communication.

(12)

‘capacitor system’ means a REESS that includes capacitor cells or capacitor assemblies or capacitor pack(s) as well as electrical circuits, electronics, interfaces for external systems (e.g. thermal conditioning system), CCU and contactors.

(13)

‘representative capacitor subsystem’ means a subsystem of a capacitor system that consists of either capacitor assemblies or capacitor pack(s) in serial and/or parallel configuration with electrical circuits, thermal conditioning system interfaces, control units and capacitor cell electronics.

(14)

‘nC’ means the current rate equal to n times the one hour discharge capacity expressed in ampere (i.e. current that takes 1/n hours to fully charge or discharge the tested device based on the rated capacity).

(15)

‘continuously variable transmission’ or ‘CVT’ means an automatic transmission that can change seamlessly through a continuous range of gear ratios.

(16)

‘differential’ means a device that splits a torque into two branches, e.g., for left- and right-hand side wheels, while allowing these branches to rotate at unequal speeds. The torque-splitting function can be biased or deactivated by a differential brake- or differential lock device (if applicable).

(17)

‘differential gear ratio’ means the ratio of differential input speed (towards the primary propulsion energy converter) over differential output speed (towards driven wheels) with both differential output shafts running at the same speed.

(18)

‘drivetrain’ means the connected elements of the powertrain for transmission of the mechanical energy between the propulsion energy converter(s) and the wheels.

(19)

‘electric machine’ (EM) means an energy converter transforming between electrical and mechanical energy.

(20)

‘electric machine system’ means a combination of electric powertrain components as installed in the vehicle comprising of an electric machine, inverter and electronic control unit(s), including connections and interfaces for external systems

(21)

‘electric machine type’ is either (a) an asynchronous machine (ASM), (b) an excited synchronous machine (ESM), (c) a permanent magnet synchronous machine (PSM), or (d) a reluctance machine (RM).

(22)

‘ASM’ means an asynchronous electric machine type in which the electric current in the rotor needed to produce torque is obtained by electromagnetic induction from the magnetic field of the stator winding.

(23)

‘ESM’ means an excited synchronous electric machine type which contains multiphase AC electromagnets on the stator that create a magnetic field which rotates in time with the oscillations of the line current. It requires direct current supplied to the rotor for excitation.

(24)

‘PSM’ means a permanent magnet sychronous electric machine type which contains multiphase AC electromagnets on the stator that create a magnetic field which rotates in time with the oscillations of the line current. Permanent magnets embedded in the steel rotor create a constant magnetic field.

(25)

‘RM’ means a reluctance electric machine type which contains multiphase AC electromagnets on the stator that create a magnetic field which rotates in time with the oscillations of the line current. It induces non-permanent magnetic poles on the ferromagnetic rotor which does not have any windings. It generates torque through magnetic reluctance.

(26)

‘housing’ means an integrated and structural part of the component, enclosing the internal units and providing protection against direct contact from any direction of access.

(27)

‘energy converter’ means a system where the form of energy output is different from the form of energy input.

(28)

‘propulsion energy converter’ means an energy converter of the powertrain which is not a peripheral device whose output energy is used directly or indirectly for the purpose of vehicle propulsion.

(29)

‘category of propulsion energy converter’ means (i) an internal combustion engine, (ii) an electric machine, or (iii) a fuel cell.

(30)

‘energy storage system’ means a system which stores energy and releases it in the same form as the input energy.

(31)

‘propulsion energy storage system’ means an energy storage system of the powertrain which is not a peripheral device and whose output energy is used directly or indirectly for the purpose of vehicle propulsion.

(32)

‘category of propulsion energy storage system’ means (i) a fuel storage system, (ii) a rechargeable electric energy storage system (REESS), or (iii) a rechargeable mechanical energy storage system.

(33)

‘form of energy’ means (i) electrical energy, (ii) mechanical energy, or (iii) chemical energy (including fuels).

(34)

‘fuel storage system’ means a propulsion energy storage system that stores chemical energy as liquid or gaseous fuel.

(35)

‘gearbox’ means a device changing torque and speed with defined fixed ratios for each gear which may include the functionality of shiftable gears as well

(36)

‘gear number’ means an identifier for the different shiftable gears for forward direction in a transmission with specific gear ratios; the shiftable gear with the highest gear ratio gets assigned the number 1; the identifying number is increased by the increment of 1 for each gear in descending order of gear ratios.

(37)

‘gear ratio’ means the forward gear ratio of the speed of the input shaft (towards the primary propulsion energy converter) to the speed of the output shaft (towards driven wheels) without slip.

(38)

‘high-energy battery system’ or ‘HEBS’ means a battery system or representative battery subsystem, for which the numerical ratio between maximum discharge current in A, declared by the component manufacturer at a SOC of 50 % in accordance with point 5.4.2.3.2, and the nominal electric charge output in Ah at a 1C discharge rate at RT is lower than 10.

(39)

‘high-power battery system’ or ‘HPBS’ means a battery system or representative battery subsystem, for which the numerical ratio between maximum discharge current in A, declared by the component manufacturer at a SOC of 50 % in accordance with point 5.4.2.3.2, and the nominal electric charge output in Ah at a 1C discharge rate at RT is equal to or higher than 10.

(40)

‘integrated electric powertrain component’ or ‘IEPC’ means a combined system of an electric machine system together with the functionality of either a single- or multi-speed gearbox or a differential or both, characterised by at least one of the following features:

shared housing of at least two components

shared lubrication circuit of at least two components

shared cooling circuit of at least two components

shared electric connection of at least two components

Additionally, an IEPC shall comply with the following criteria:

It shall have only output shaft(s) towards the driven wheels of the vehicle and shall have no input shaft(s) for feeding propulsion torque into the system.

In the case of more than one electric machine system being part of the IEPC, all electric machines shall be connected to a single DC power source for all test runs performed in accordance with this Annex.

In the case of the functionality of a multi-speed gearbox being included, there shall be only discrete gear steps.

(41)

‘IEPC design type wheel motor’ means an IEPC with either one output shaft or two output shafts connected directly to the wheel hub(s) and where two configurations shall be distinguished for the purpose of this Annex:

Configuration ‘L’: In the case of one output shaft, the same component is installed twice in symmetrical application (i.e. one on the left and one on the right side of the vehicle at the same wheel position in longitudinal direction).

Configuration ‘T’: In the case of two output shafts, only a single component is installed with one output shaft connected to the left and the other output shaft connected to the right side of the vehicle at the same wheel position in longitudinal direction.

(42)

‘integrated hybrid electric vehicle powertrain component type 1’ or ‘IHPC Type 1’ means a combined system of multiple electric machine systems together with the functionality of a multi-speed gearbox characterised by a shared housing of all components and at least one of the following features:

shared lubrication circuit of at least two components

shared cooling circuit of at least two components

shared electric connection of at least two components

Additionally, an IHPC Type 1 shall comply with the following criteria:

It shall have only one input shaft for feeding propulsion torque into the system and only one output shaft towards the driven wheels of the vehicle.

Only discrete gear steps shall be used for all test runs performed in accordance with this Annex.

It shall enable operation of the powertrain as parallel hybrid (at least in one specific mode used for all test runs performed in accordance with this Annex).

It shall be able to be tested in the transmission test in accordance with Annex VI with the electric power supply disconnected in accordance with subpoint (b) of point 4.4.1.2.

All electric machines shall be connected to a single DC power source for all test runs performed in accordance with this Annex.

The gearbox part within the IHPC Type 1 shall not be operated as CVT for all test runs performed in accordance with this Annex.

A hydrodynamic torque converter shall not be part of the IHPC Type 1.

(43)

‘internal combustion engine’ or ‘ICE’ means an energy converter with intermittent or continuous oxidation of combustible fuel transforming between chemical and mechanical energy.

(44)

‘inverter’ means an electric energy converter that changes direct electric current to single-phase or polyphase alternating electric currents

(45)

‘peripheral device’ means any energy consuming, converting, storing or supplying devices, where the energy is not directly or indirectly used for the purpose of vehicle propulsion but which are essential to the operation of the powertrain and are therefore considered to be part of the powertrain.

(46)

‘powertrain’ means the total combination in a vehicle of propulsion energy storage system(s), propulsion energy converter(s) and the drivetrain(s) providing the mechanical energy at the wheels for the purpose of vehicle propulsion, plus peripheral devices.

(47)

‘rated capacity’ means the total number of ampere-hours that can be withdrawn from a fully charged battery determined in accordance with point 5.4.1.3

(48)

‘rated speed’ means the highest rotational speed of the electric machine system where the overall maximum torque occurs

(49)

‘room temperature’ or ‘RT’ means that the ambient air inside the test cell shall have a temperature of (25 ± 10) °C

(50)

‘state of charge’ or ‘SOC’ means the available electrical charge stored in a battery system expressed as a percentage of its rated capacity in accordance with 5.4.1.3 (where 0 % represents empty and 100 % represents full)

(51)

‘unit under test’ or ‘UUT’ means the electric machine system, IEPC or IHPC Type 1 to be actually tested

(52)

‘battery UUT’ means the battery system or representative battery subsystem to be actually tested

(53)

‘capacitor UUT’ means the capacitor system or representative capacitor subsystem to be actually tested.

(54)

‘FCS UUT’ means the fuel cell system (‘FCS’) or representative fuel cell (‘FC’) subsystem to be actually tested.

(55)

‘balance of plant’ or ‘BoP’ means the assembly of all the supporting components and auxiliary systems of an FCS needed to deliver the energy, other than the generating unit itself. These may include transformers, inverters, supporting structures etc., depending on the type of plant.

(56)

‘BoP-component’ or ‘BoPC’ means a component that belongs to a BoP.

(57)

‘air processing sub-system’ or ‘APS’ means an assembly of components that delivers air (oxygen containing media) for reaction in the FCS. The APS can provide air as required to (a) the fuel processing sub-system; (b) thermal management sub-system (TMS); and (c) fuel cell stack-sub-system (FCSS). The APS may include filtration, purification, compression, humidification as well as flow control components.

(58)

‘fuel processing sub-system’ or ‘FPS’ means the assembly of components that chemically or physically converts the supplied fuel to a form suitable for use in the fuel cell stack sub-system. The fuel processing sub-system may include pressure regulation, humidification, and mixing components. The fuel processing sub-system also may be referred to as the fuel processor subsystem or the fuel processor.

(59)

‘thermal management sub-system’ or ‘TMS’ means the assembly of components that provides both thermal and water management for the FCS. The thermal management sub-system may include an accumulator, pump, radiator, and/or condenser. It may also provide water recovery and process humidification functions.

(60)

‘fuel cell stack sub-system’ or ‘FCSS’ means the assembly containing one or more fuel cell stacks in which by means of an electrochemical reaction between fuel and oxidant chemical energy is transferred into electric energy. The FCSS generally includes connections for conducting fuel, oxidant, and exhaust; electrical connections for the power delivered by the stack sub-system; and means for monitoring electrical loads, which are for interface to the FCS. Additionally, the FCSS may incorporate means for conducting additional fluids (e.g., cooling media, inert gas), means for detecting normal and/or abnormal operating conditions, enclosures or pressure vessels, and ventilation systems. The FCSS is also known as a fuel cell module, fuel cell power module, or fuel cell stack assembly.

(61)

‘fuel cell control sub-system’ means a system that controls and/or monitors FCS conditions and automatically responds to vehicle power demands while preventing hazardous conditions and damage to the FCS. The automatic control system generally includes a microprocessor-based device with input and output functions and may provide a diagnostic or troubleshooting function.

(62)

‘power distribution sub-system’ (PDS) means the collection of components that connects the FCSS to the power conditioning system and that converts power for FCS use. The power distribution sub-system may include cables, switches and/or contactors and/or relays, buses, other connectors, and instrumentation. The PDS has only DC power as input.

(63)

‘fuel cell system’ or ‘FCS’ means an energy converter which transforms chemical energy into electric energy via in series connected electrochemical cells, referred to as a fuel cell stack. The FCS includes all necessary balance of plant components to provide fuel, oxygen (e.g. in form of air), cooling and media conditioning to ensure a sound operation of the FC-stacks. Different configurations of FCS are known, also referred to as different types or variants, the relevant types are described in Table 9.

(64)

‘power conditioning system’ or ‘PCS’ means the collection of components that converts the electric energy generated by the fuel cell stack(s) into electricity useful for vehicle purposes. The PCS includes at least a voltage regulator (DC/DC) and/or voltage converters (DC/AC). It might be connected to the cooling media loop. It provides the interface between the FCS and the battery and other electrical vehicle loads.

(65)

‘water treatment sub-system’ or ‘WTS’ means the assembly of components that provides the treatment necessary for the process water used in the fuel cell system (FCS). For example, the WTS may include a demineralizing / deionizing resin bed and instrumentation and may provide water recovery and process humidification functions.

(66)

‘inner cooling loop’ or ‘ICL’ means in FCS with a split of inner (primary) and outer (secondary) cooling loops of BoPC, a closed coolant loop that is connected to the cooling media of the different BoPC and is integrated into the FCS as part of the TMS. Multiple inner cooling loops may exist inside an FCS, e.g. one for the power electronics (PDS, PCS) and one for the FCSS.

(67)

‘outer cooling sub-system’ means the collection of components to exchange waste heat of the FCS, which is stored inside the cooling fluid, with the environment. It may include radiators, pumps, fans and other actuators.

(68)

‘external electric components’ means all electric components that are not part of the FCS and / or are electrically not connected to the DC power between FCSS and PCS. These include the electric machines of the powertrain and the REESS.

(69)

‘relative transition slope’ or ‘RTS’ means a coefficient that express the change rate of the set-point for the electric power output of the FCS. RTS puts into relation the change in time against the upper electric power output of the FCS.

(70)

‘system conditioning operating point’ or ‘SCOP’ means a setpoint for the electrical power output of the system that is suited to condition the FCS in the specified duration of the conditioning phase.

(71)

‘setpoint’ or ‘SP’ means the desired or target value for an essential variable, or process value of a system.

(72)

‘process value’ or ‘process variable’ or ‘PV’ is the current measured value for an essential variable, or process value of a system.

For the purposes of this Annex, the following abbreviations shall apply:

ACalternating current

DCdirect current

DCIRdirect current internal resistance

EMSelectric machine system

OCVopen circuit voltage

SCstandard cycle

The calibration laboratory facilities shall comply with the requirements of either IATF 16949, ISO 9000 series or ISO/IEC 17025. All laboratory reference measurement equipment, used for calibration and/or verification, shall be traceable to national or international standards.

The measurement equipment shall meet the following accuracy requirements:

[‘Accuracy’ means the absolute value of deviation of the analyser reading from a reference value which is traceable to a national or international standard.] [The ‘maximum calibration’ value shall be the maximum predicted value for the respective measurement system expected during a specific test run performed in accordance with this Annex multiplied by a factor of 1.1.] [If volume flow is metered, the accuracy shall be transferred as accuracy of mass flow measurement.]

Measurement system | Accuracy

Rotational speed | 0,5 % of the analyser reading or 0,1 % of max. calibration of rotational speed whichever is larger

Torque | 0,6 % of the analyser reading or 0,3 % of max. calibration or 0,5 Nm of torque whichever is larger

Fuel mass flow | 1,0 % of the analyzer reading or 0,5 % of max. calibration(2) whichever is larger

Air/oxidant mass flow(1) | 1,0 % of the analyzer reading or 0,5 % of max. calibration(2) whichever is larger

Cooling liquid mass flow | 2,5 % of the analyzer reading or 0,1 % of max. calibration(2) whichever is larger

Cooling liquid volume flow | 2,5 % of the analyzer reading or 0,1 % of max. calibration(2) whichever is larger

Cooling liquid pressure | 0,5 % of the analyzer reading or 0,1 % of max. calibration(2) whichever is larger

Fuel, ambient, air pressure | 1 kPa

Current | 0,5 % of the analyser reading or 0,25 % of max. calibration or 0,5 A of current whichever is larger

This article is long: the rest is at the official publication.