Art. 31 Regulation (EU) 2018/858

Conformity of production arrangements

In forcesince 30 May 2018cited 21×
1.

An approval authority that has granted an EU type-approval shall take the necessary measures in accordance with Annex IV to verify, if necessary in cooperation with the approval authorities of the other Member States, that the manufacturer produces the vehicles, systems, components or separate technical units in conformity with the approved type.

2.

An approval authority that has granted a whole-vehicle type-approval shall verify a statistically relevant number of samples of vehicles and certificates of conformity on their compliance with Articles 36 and 37 and shall verify that the data in those certificates of conformity are correct.

3.

An approval authority that has granted an EU type-approval shall take the necessary measures to verify, if necessary in cooperation with the approval authorities of the other Member States, that the arrangements referred to in paragraphs 1 and 2 of this Article continue to be adequate so that vehicles, systems, components or separate technical units in production continue to conform to the approved type and that certificates of conformity continue to comply with Articles 36 and 37.

4.

In order to verify that a vehicle, system, component or separate technical unit conforms to the approved type, the approval authority that granted the EU type-approval shall take the necessary measures to carry out the checks or tests on samples taken at the manufacturer's premises, including production facilities that are required for EU type-approval.

In accordance with Annex IV, the approval authority shall take the necessary measures to carry out such checks or tests with the frequency set out in the regulatory acts listed in Annex II, or, if no frequency is specified in those acts, at least once every three years.

5.

In order to verify that a vehicle, system, component or separate technical unit conforms to the approved type, the approval authority or the technical services shall:

(a)

if a range of values is provided for in the test procedures laid down in the relevant regulatory acts listed in Annex II, set the values in a random manner within the provided range when carrying out checks or tests; and

(b)

have access to the software, algorithms, documentation and any additional information in accordance with Article 25(4).

6.

An approval authority that has granted an EU type-approval shall take the necessary measures to verify that the manufacturer complies with the obligations set out in Chapter XIV. It shall verify in particular whether, in order to comply with those obligations, the manufacturer has amended or supplemented the vehicle OBD information and vehicle repair and maintenance information.

7.

Where an approval authority that has granted an EU type-approval establishes that the manufacturer no longer produces the vehicles, systems, components or separate technical units in conformity with the approved type or with the requirements of this Regulation, or establishes that the certificates of conformity no longer comply with Articles 36 and 37, even though production is continued, it shall take the necessary measures to ensure that the arrangements for conformity of production are followed correctly or withdraw the type-approval. The approval authority may decide to take all necessary restrictive measures in accordance with Chapter XI.

8.

The Commission is empowered to adopt delegated acts in accordance with Article 82, amending Annex IV to take account of technological and regulatory developments by updating the conformity of production procedures.

The 10 that are cited most themselves, of 21.

  • Regulation (EU) 2017/115189Law

    … на съответствието на производството в съответствие с член 31 от Регламент (ЕС) 2018/858. Прилагат се разпоредбите, определени в раздел 4 …

  • Regulation (EU) 2017/2400Law

    … трябва да бъдат в съответствие с изискванията, посочени в член 31 от Регламент (ЕС) 2018/858. 1.2 Съответствието на сертифицираните …

  • Regulation (EU) 2021/535Law

    … inférieur et supérieur (= l’écart négatif ou positif autour de la valeur déclarée) pour les besoins de l’article 31, paragraphes 3 et 4, du règlement (UE) 2018/858. 3. Les tolérances visées dans la présente section …

  • The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitio…65667172Law

    … In Article 11 (conformity of production), in paragraph 1, for “Article 12 of Directive 2007/46/EC” substitute “Article 31 of Regulation (EU) 2018/858”. (13) In Article 12 (in-service conformity)— (a) in paragraph 1, for …

  • Regulation (EU) 2022/2236Law

    … 1.], en met name artikel 4, lid 2, artikel 5, lid 3, artikel 31, lid 8, en artikel 41, lid 5, Overwegende hetgeen volgt:

  • Regulation (EU) 2022/1379Law

    … de carburant doivent être conformes aux dispositions relatives à la conformité de la production visées à l’article 31 du règlement (UE) 2018/858.»; 53) le point 8.1.2.2.1 est remplacé par le texte suivant: «8.1.2.2.1. Si …

  • Regulation (EU) 2023/4431Law

    … на съответствието на производството в съответствие с член 31 от Регламент (ЕС) 2018/858. Прилагат се разпоредбите, определени в раздел 4 …

  • Regulation (EU) 2025/1706109Law

    … В съответствие с разпоредбите на член 31 от Регламент (ЕС) 2018/858 се предприемат мерки за осигуряване на съответствието на …

  • Regulation (EU) 2025/170713Law

    … разпоредбите за съответствие на производството, определени в член 31 от Регламент (ЕС) 2018/858, приложение IV към Регламент (ЕС) 2018/858 и …

  • Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No…Law

    … of the certified CO2 emissions and fuel consumption related properties procedures shall comply with those set out in Article 31 of Regulation (EU) 2018/858. 5.2. Conformity of the certified CO2 emissions and fuel consumption related …