ANNEX VII, Regulation (EU) 2016/1789

In forcesince 7 Sep 2016

Annex VIII to Implementing Regulation (EU) 2015/504 is amended as follows:

(1)

Point 1.1. is replaced by the following:

‘1.1. For each of the regulatory acts listed in Annex I to Regulation (EU) No 167/2013, the template of the test reports shall be drawn up by the technical service in accordance with its rules of good practice.’

(2)

the following points 3.3. to 3.4.2. are added:

‘3.3. Test reports on braking

The models of the test reports for braking are set out in Appendices 1 to5.

3.4. Additional information to be stated in model test report form for the alternative procedures for Type-I and Type-III tests for towed vehicle brakes (Annex VII, Appendix 1 to Regulation (EU) 2015/68)set out in Appendix 1

3.4.1. Test report number

The test report number consists of two parts: a base part and a suffix which identifies the issue level of the test report.

3.4.1.1. The base part, consisting of a maximum of 20 characters, and suffix shall be clearly separated from each other using e.g. a dot or slash.

3.4.1.2. The base part of the test report number shall only cover brakes with the same brake identifier and the same brake factor.

3.4.2. Test code

In addition to the test report number a “test code” consisting of up to eight characters (e.g. ABC123) shall indicate the test results applicable to the identifiers and the test specimen, which is described by the details given in point 3.7. of Appendix 1 to Annex VII to Regulation (EU) 2015/68.’

(3)

the following Appendices 1 to 5 are added:

‘ ’