In Annex VII to Implementing Regulation (EU) 2015/504, in Appendix 1, point 4 is replaced by the following:
Measured according to Annex II to Commission Delegated Regulation (EU) 2015/68, as last amended by Commission Delegated Regulation (EU) …/…(1)(3)
[See point 2.1. of Appendix 1 to Annex VII of Regulation (EU) 2015/68.]
Axles of the vehicle | Reference axles
Static mass (P)1 | Braking force needed at wheels | Speed | Test mass (Pe) | Braking force developed at wheels | Speed
kg | N | km/h | kg | N | km/h
Axle 1
Axle 2
Axle 3
Axle 4
Total mass of the vehicle submitted for approval … kg
Braking force needed at wheels … N
Retarding torque needed at main shaft of endurance braking system … Nm
Retarding torque obtained at main shaft of endurance braking system (according to diagram) … Nm
Reference axle … Report No. … Date …
… (copy attached)
Type-I | Type-III
Braking force per axle (N)
(See point 4.2.1. of Appendix 1 to Annex VII to Regulation (EU) 2015/68)
Axle 1
Axle 2
Axle 3
T1 = … % Fe
T2 = … % Fe
T3 = … % Fe
T1 = … % Fe
T2 = … % Fe
T3 = … % Fe
Predicted actuator stroke (mm)
(See point 4.3.1.1. of Appendix 1 to Annex VII to Regulation (EU) 2015/68)
Axle 1
Axle 2
Axle 3
s1 = …
s2 = …
s3 = …
s1 = …
s2 = …
s3 = …
Average thrust output (N)
(See point 4.3.1.2. of Appendix 1 to Annex VII to Regulation (EU) 2015/68)
Axle 1
Axle 2
Axle 3
ThA1 = …
ThA2 = …
ThA3 = …
ThA1 = …
ThA2 = …
ThA3 = …
Braking performance (N)
(See point 4.3.1.4. of Appendix 1 to Annex VII to Regulation (EU) 2015/68)
Axle 1
Axle 2
Axle 3
T1 = …
T2 = …
T3 = …
T1 = …
T2 = …
T3 = …
Type-0 subject towed vehicle test result (E) |
Type-I hot
(predicted)
Type-III hot
(predicted)
Braking performance of vehicle
(See points 2.3.3, 2.4.3 and 2.5.5 of Annex II to Regulation (EU) 2015/68)
’.