Annex IV to Implementing Regulation (EU) 2015/504 is amended as follows:
point 2.1.1. is replaced by the following:
‘2.1.1. The information on the plate shall be clearly legible, indelible and shall contain the following information in the order given below and in accordance with one of the two alternative models set out in Appendix 1:’
point 2.1.1.8. is replaced by the following:
‘2.1.1.8. Technically permissible towable mass(es) for each chassis/ braking configuration of the towed R- or S-category vehicle in accordance with entry 4.1.3 of the information document data entries laid down in Part B of Annex I to this Regulation(2), in the following format: “B-1” unbraked, “B-2” inertia braked, “B-3” hydraulic braked, “B-4” pneumatic braked, “T-1” drawbar, “T-2” rigid drawbar, “T-3” centre-axle;’
point 4.1.1.8. is replaced by the following:
‘4.2.1.8. Technically permissible towable mass(es) for each chassis/ braking configuration of the towed R- or S-category vehicle in accordance with entry 4.1.3 of the information document data entries laid down in Part B of Annex I to this Regulation(2), in the following format: “B-1” unbraked, “B-2” inertia braked, “B-3” hydraulic braked, “B-4” pneumatic braked, “T-1” drawbar, “T-2” rigid drawbar, “T-3” centre-axle;’
Appendix 1 is replaced by the following: