Test Report No. …
Base part: ID4- …
Suffix: …
General …
1.1. Axle manufacturer (name and address): …
1.1.1. Make of axle manufacturer: …
1.2. Brake manufacturer (name and address): …
1.2.1. Brake identifier ID2-: …
1.2.2. Automatic brake adjustment device: integrated/non-integrated [Strike out what does not apply.]
1.3. Manufacturer's Information Document:
Test Record
The following data has to be recorded for each test:
2.1. Test code: …
2.2. Test specimen: (precise identification of the variant tested related to the Manufacturer's Information Document.)
2.2.1. Axle
2.2.1.1. Axle identifier: ID1- …
2.2.1.2. Identification of tested axle: …
2.2.1.3. Test axle load (Fe identifier): ID3- … daN
2.2.2. Brake
2.2.2.1. Brake identifier: ID2- …
2.2.2.2. Identification of tested brake: …
2.2.2.3. Maximum stroke capability of the brake [Applies to disc brakes only.]: …
2.2.2.4. Effective length of the cam shaft3: …
2.2.2.5. Material variation as per point 3.8 (m) of Appendix 1 to Annex VII to Regulation (EU) 2015/68: …
2.2.2.6. Brake drum / disc [Strike out what does not apply.] …
2.2.2.6.1. Actual test mass of disc / drum [Strike out what does not apply.]: …
2.2.2.6.2. Nominal external diameter of disc [Applies to disc brakes only.]: …
2.2.2.6.3. Type of cooling of the disc ventilated/non-ventilated [Strike out what does not apply.]
2.2.2.6.4. With or without integrated hub [Strike out what does not apply.]
2.2.2.6.5. Disc with integrated drum – with or without parking brake function [Strike out what does not apply.] [Applies to disc brakes only.]
2.2.2.6.6. Geometric relationship between disc friction surfaces and disc mounting: …
2.2.2.6.7. Base material: …
2.2.2.7. Brake lining or pad [Strike out what does not apply.]
2.2.2.7.1. Manufacturer: …
2.2.2.7.2. Make: …
2.2.2.7.3. Type: …
2.2.2.7.4. Method of attachment of the lining / pad on the brake shoe / back plate [Strike out what does not apply.]: …
2.2.2.7.5. Thickness of back plate, weight of shoes or other describing information (Manufacturer's Information Document) [Strike out what does not apply.]: …
2.2.2.7.6. Base material of brake shoe / back plate [Strike out what does not apply.]: …
2.2.3. Automatic brake adjustment device (not applicable in the case of integrated automatic brake adjustment device) [Strike out what does not apply.]
2.2.3.1. Manufacturer (name and address): …
2.2.3.2. Make: …
2.2.3.3. Type: …
2.2.3.4. Version: …
2.2.4. Wheel(s) (dimensions see Figures 1A and 1B in the information document of towed vehicle axle and brake with respect to the alternative procedures for Type I and Type III tests)
2.2.4.1. Reference tyre rolling radius (Re) at test axle load (Fe): …
2.2.4.2. Data of the fitted wheel during testing:
Tyre size | Rim size | Xe (mm) | De (mm) | Ee (mm) | Ge (mm)
2.2.5. Lever length le: …
2.2.6. Brake actuator
2.2.6.1. Manufacturer: …
2.2.6.2. Make: …
2.2.6.3. Type: …
2.2.6.4. (Test) Identification number: …
2.3. Test results (corrected to take account of rolling resistance of 0,01·Fe and 0,02·Fe respectively)
2.3.1. In the case of vehicles of categories
R1, R2, S1
‘R3a/R4a/S2a’ [Where these vehicles have been subject to the Type III test (compare point 2.3.1. or 2.3.2.+).]
‘R3b/R4b/S2b’ where the sum of the technically permissible masses per axle does not exceed 10000 kg [Where these vehicles have been subject to the Type III test (compare point 2.3.1. or 2.3.2.+).]
Depending on the maximum design speed and assumed rolling resistance of 0,01 or 0,02 in the following Tables A to C apply:
2.3.1.1 Considered rolling resistance coefficient R = 0,01 (covering also towed vehicles specified in point 2.3.1. above with a maximum design speed exceeding 40 km/h)
Table A
Applicable for all towed vehicle as specified in paragraph 2.3.1 above
Test type
0 | I
Appendix 1 to Annex VII of Regulation (EU) 2015/68, point: | 3.5.1.4. | 3.5.2.2. or 3.5.2.3. | 3.5.2.4.
Test speed | 40 | 40 | 40
Brake actuator pressure pe | | — |
Braking time | — | 2,55 | —
Brake force developed Te | | |
Brake efficiency Te/Fe | | |
Actuator stroke se | | — |
Brake input torque Ce | | — |
Brake input threshold torque C0,e | | |
2.3.1.2 Considered rolling resistance coefficient R = 0,02 (covering towed vehicles Ra and Sa specified in point 2.3.1. above with a maximum design speed not exceeding 40 km/h)
Table B
Alternative test procedure applicable for all towed vehicle of categories Ra and Sa
Test type
0 | I
Annex VII, Appendix 2, paragraph: | 3.5.1.4. | 3.5.2.2. or 3.5.2.3. | 3.5.2.4.
Test speed | 40 | 40 | 40
Brake actuator pressure pe | | — |
Braking time | — | 2,55 | —
Brake force developed Te | | |
Brake efficiency Te/Fe | | |
Actuator stroke se | | — |
Brake input torque Ce | | — |
Brake input threshold torque C0,e | | |
2.3.1.3 Considered rolling resistance coefficient R = 0,02 (covering towed vehicles Ra and Sa specified in point 2.3.1. above with a maximum design speed not exceeding 30 km/h)
Table C
Alternative test procedure in the case of towed vehicle with vmax ≤ 30 km/h
Test type
0 | I
Appendix 1 to Annex VII of Regulation (EU) 2015/68, point: | 3.5.1.4. | 3.5.2.2. or 3.5.2.3. | 3.5.2.4.
Test speed | 30 | 30 | 30
Brake actuator pressure pe | | — |
Braking time | — | 3,90 | —
Brake force developed Te | | |
Brake efficiency Te/Fe | | |
Actuator stroke se | | — |
Brake input torque Ce | | — |
Brake input threshold torque C0,e | | |
2.3.2. In the case of vehicles of categories
‘R3a/R4a/S2a’ [Where these vehicles have been subject to the Type III test (compare point 2.3.1. or 2.3.2.+).]
‘R3b/R4b/S2b’ where the sum of the technically permissible masses per axle does not exceed 10000 kg [Where these vehicles have been subject to the Type III test (compare point 2.3.1. or 2.3.2.+).]
R3b/R4b/S2b’ where the sum of the technically permissible masses per axle exceeds 10000 kg
Test type | 0 | III
Appendix 1 to Annex VII of Regulation (EU) 2015/68, point: | 3.5.1.4. | 3.5.3.1. | 3.5.3.2.
Test speed initial km/h | 60 | | 60
Test speed finalkm/h | | |
Brake actuator pressure pe | | — |
Number of brake applications - | — | 20 | —
Duration of braking cycle s | — | 60 | —
Brake force developed Te daN | | |
Brake efficiency Te/Fe - | | |
Actuator stroke se mm | | — |
Brake input torque Ce Nm | | — |
Brake input threshold torque C0,e Nm | | — |
Application range
The application range specifies the axle/brake variants that are covered in this test report, by showing which variables are covered by the individual test codes.
This test has been carried out and the results reported in accordance with Appendix 1 to Annex VII to Regulation (EU) 2015/68.
At the end of the test described in point 3.6. of Appendix 1 to Annex VII of Regulation (EU) 2015/68, the requirements of point 2.2.2.8.1. of Annex I to Regulation (EU) 2015/68 were deemed to be fulfilled / not fulfilled [Strike out what does not apply.].
Technical Service [To be signed by different persons even when the Technical Service and Approval Authority are the same or alternatively a separate Approval Authority authorization issued with the report.] carrying out the test
Signed: … Date: …
Approval Authority [To be signed by different persons even when the Technical Service and Approval Authority are the same or alternatively a separate Approval Authority authorization issued with the report.]
Signed: … Date: …