ANNEX V, Regulation (EU) 2018/1832

In forcesince 5 Nov 2018

Annex IX to Regulation (EU) 2017/1151 is amended as follows:

(1)

in Section A, point 3. is replaced by the following:

For the constituents that are additive, such as total hydrocarbons and total sulfur compounds, the sum of the constituents are to be less than or equal to the acceptable limit.

[The hydrogen fuel index is determined by subtracting the “total non-hydrogen gases” in this table, expressed in mole per cent, from 100 mole per cent.] [Total hydrocarbons include oxygenated organic species. Total hydrocarbons shall be measured on a carbon basis (μmolC/mol). Total hydrocarbons may exceed 2 μmol/mol due only to the presence of methane, in which case the summation of methane, nitrogen and argon shall not exceed 100 μmol/mol.] [As a minimum, total sulphur compounds include H2S, COS, CS2 and mercaptans, which are typically found in natural gas.] [Total halogenated compounds include, for example, hydrogen bromide (HBr), hydrogen chloride (HCl), chlorine (Cl2), and organic halides (R-X).] [Test method shall be documented.’]

Characteristics | Units | Limits | Test Method

minimum | maximum

Hydrogen fuel index | % mole | 99,97 | |

Total non-hydrogen gases | μmol/mol | | 300 |

Maximum concentration of individual contaminants

Water (H2O) | μmol/mol | | 5 |

Total hydrocarbons (Methane basis) | μmol/mol | | 2 |

Oxygen (O2) | μmol/mol | | 5 |

Helium (He) | μmol/mol | | 300 |

Total Nitrogen (N2) and Argon (Ar) | μmol/mol | | 100 |

Carbon dioxide (CO2) | μmol/mol | | 2 |

Carbon monoxide (CO) | μmol/mol | | 0,2 |

Total sulfur compounds (H2S basis) | μmol/mol | | 0,004 |

Formaldehyde (HCHO) | μmol/mol | | 0,01 |

Formic acid (HCOOH) | μmol/mol | | 0,2 |

Ammonia (NH3) | μmol/mol | | 0,1 |

Total halogenated compounds

(Halogenate ion basis)

μmol/mol | | 0,05 |