Migration testing using the whole equipment or appliance for food processing and/or food production is presently not allowed under the Regulation. However, when food processing equipment or appliances are made of multiple plastic parts, or contain plastic parts as well as other materials, it may be burdensome and in some cases impossible to verify compliance of these plastic parts with the Regulation. It should therefore be possible to verify compliance by conducting migration tests in the food or food simulant produced or processed using the whole equipment or appliance, or assemblies or modules thereof, in accordance with the operating instructions, instead of trying to establish the migration from each individual plastic part or material used in the equipment or appliance. If such a migration test is done under the worst foreseeable use conditions in the food, or when appropriate, in a food simulant, which can be achieved in accordance with the operating instructions, and the transfer of constituents from the equipment or appliance as a whole does not exceed the specific migration limits, the plastic parts of the food processing equipment should be considered to comply with the requirements of Article 11(1) of the Regulation if the plastic parts comply with the compositional provisions set out in the Regulation. It is therefore appropriate to amend Annex V of the Regulation to introduce provisions that will allow for the migration testing with the whole equipment or appliance for food processing and/or food production, instead of verifying the compliance of each of its individual parts.
Recital 32, Regulation (EU) 2020/1245
In forcesince 2 Sep 2020