The Authority adopted a favourable scientific opinion on the use of the substance titanium dioxide surface-treated with fluoride-modified alumina (FCM No 1077) as an additive in plastic food contact materials [EFSA Journal 2019; 17(6):5737.]. In that opinion, the Authority noted that the substance, which is a defined mixture of particles of which a certain number have a diameter in the nanoparticle range (< 100 nanometres), is embedded in the polymer and does not migrate. The Authority concluded that this substance is not of safety concern to the consumer if it is used as an additive at up to 25,0 % w/w in all polymer types in contact with all food types for any time and temperature conditions. The Authority also concluded that the use of this substance in polar polymers which swell when in contact with foods for which food simulant B (3,0 % w/v acetic acid) is assigned in Annex III to the Regulation could exceed the respective specific migration limits of 0,15 mg/kg and 1,0 mg/kg food or food simulant for fluoride and aluminium respectively, if these polar polymers are used in certain contact conditions. Significant exceedance of those limits was shown in contact conditions exceeding 4 hours at 100 °C. This risk should be communicated to users of such materials and control authorities via a note on the verification of compliance. Therefore, it is appropriate to include this additive in the Union list of authorised substances, allowing its use as an additive at up to 25,0 % w/w and with a note on the verification of compliance, warning that the migration limits can be exceeded under certain conditions.
Recital 11, Regulation (EU) 2020/1245
In forcesince 2 Sep 2020