Recital 14, Regulation (EU) 2020/1245

In forcesince 2 Sep 2020

Some metals already exert adverse health effects at levels in the food below what can be quantified analytically using techniques applied by official control laboratories. In such a case, a method with a limit of detection in accordance with Article 11(4) of the Regulation is the appropriate means to verify the level of migration. The European Union Reference Laboratory for Food Contact Materials, designated in accordance with Regulation (EU) 2017/625 of the European Parliament and of the Council [Regulation (EU) 2017/625 of the European Parliament and of the Council of 15 March 2017 on official controls and other official activities performed to ensure the application of food and feed law, rules on animal health and welfare, plant health and plant protection products, amending Regulations (EC) No 999/2001, (EC) No 396/2005, (EC) No 1069/2009, (EC) No 1107/2009, (EU) No 1151/2012, (EU) No 652/2014, (EU) 2016/429 and (EU) 2016/2031 of the European Parliament and of the Council, Council Regulations (EC) No 1/2005 and (EC) No 1099/2009 and Council Directives 98/58/EC, 1999/74/EC, 2007/43/EC, 2008/119/EC and 2008/120/EC, and repealing Regulations (EC) No 854/2004 and (EC) No 882/2004 of the European Parliament and of the Council, Council Directives 89/608/EEC, 89/662/EEC, 90/425/EEC, 91/496/EEC, 96/23/EC, 96/93/EC and 97/78/EC and Council Decision 92/438/EEC (OJ L 95, 7.4.2017, p. 1).] (‘EURL-FCM’) has conducted work with the national reference laboratories which shows that analytical methods are already available that are suitable to detect the migration of metals from plastic materials at lower levels that is presently the case and which can be routinely used by the majority of involved laboratories. Even though some of these limits may change because of further analytical developments in the future, it is appropriate to assign the detection limits that can be achieved now to those metals in order to establish a maximum possible and uniform level of safety. Therefore it is appropriate to clarify the detection limits for metals in the list of limits in point 1 of Annex II to the Regulation, and to redraft that list as a table to provide a clearer framework for future changes to such limits.