Lead should not be used intentionally to manufacture a plastic material, but it can be present as an impurity. As its presence cannot be fully prevented, and it can cause health effects at any level of exposure, there should be uniform rules to ensure its presence can be controlled. It is therefore appropriate to establish a common limit for its migration from plastic materials. In absence of a health based guidance value the BMDL01 value of 0,5 μg lead/kg body weight per day is used as basis for that limit. Lead exposure however occurs from many sources other than from articles and materials intended to come into contact with food. To derive a limit for the migration of lead from plastic materials and articles intended to come into contact with food, it is therefore appropriate to apply a conventional allocation factor of 10 %, to account for the contribution of lead from materials and articles intended to come into contact with food to the total lead exposure. Taking into account conventional exposure assumptions for such materials and articles, and assuming an average body weight of 60 kg, the migration of lead from plastic materials and articles intended to come into contact with food should not exceed 0,003 mg/kg food in food or food simulant in order to reduce the probability of adverse health effects to a minimum. However, according to the EURL-FCM reliable detection of lead in food or food simulant has not been tested among National Reference Laboratories below the limit of detection as laid down in Article 11(4) to the Regulation. Therefore, it advised to assign a detection limit for lead at 0,01 mg/kg food instead. It is therefore appropriate to amend Annex II of the Regulation accordingly.
Recital 22, Regulation (EU) 2020/1245
In forcesince 2 Sep 2020