Recital 29, Regulation (EU) 2020/1245

In forcesince 2 Sep 2020

Point 2.1.6 of Annex V to the Regulation requires three subsequent tests for articles and materials that are placed in repeated contact with food. The results of the third migration test should be used to verify compliance with the migration limits. However, if the migration was to increase between the first, second and third test, the tests would not be suitable to verify compliance even in cases where the specific migration limit is not exceeded in any of the three tests, as they will not adequately predict the final migration level after continued contact with food. Thereto the migration should be strictly decreasing in subsequent tests. While this principle is already reflected in the second subparagraph of point 2.1.6 on conditions to use the results of the first test, as well as in point 3.3.2 on overall migration testing, a requirement that the migration should not increase between subsequent tests was not specified in the first paragraph of point 2.1.6. It would therefore be appropriate to amend the Regulation and add this requirement. However, in some instances, such as when migration is low relative to the measurement error, it may be difficult to establish a decreasing trend analytically and it would require complex rules. Therefore it is appropriate to only require that a the migration established in a subsequent test does not exceed that of the previous test, to clarify this principle in the Regulation, and to establish that a material that shows increasing migration over the subsequent tests should never be considered compliant.