Without prejudice to the power of the competent authority to request additional particulars in accordance with Article 15(1), operators shall submit for the purposes of the baseline data report, the following data at installation and sub-installation level for all calendar years of the relevant baseline period. For new entrants, the data report shall cover the data listed in sections 1 and 2 at installation and sub-installation level.
This item contains at least the following information:
Name and address of the installation;
Installation identifier used in the Union Registry;
Permit identifier and issue date of the first greenhouse gas (GHG) emission permit the installation received pursuant to Article 6 of Directive 2003/87/EC;
Permit identifier and date of the most recent GHG permit, if applicable;
Name and address of the operator, contact information of an authorised representative and of a primary contact person, if different.
This item contains at least the following information:
Name and address of the verifier, contact information of an authorised representative and of a primary contact person, if different;
Name of the national accreditation body which accredited the verifier;
Registration number issued by the national accreditation body.
This item contains at least the following information:
List of activities pursuant to Annex I to Directive 2003/87/EC carried out in the installation;
The installation's NACE code (revision 2) in accordance with Regulation (EC) No 1893/2006 of the European Parliament and of the Council [Regulation (EC) No 1893/2006 of the European Parliament and of the Council of 20 December 2006 establishing the statistical classification of economic activities NACE Revision 2 and amending Council Regulation (EEC) No 3037/90 as well as certain EC Regulations on specific statistical domains (OJ L 393, 30.12.2006, p. 1).];
Whether the installation falls under one or more categories which may be excluded from the EU ETS pursuant to Article 27 or Article 27a of Directive 2003/87/EC:
Emissions lower than 25000 t CO2(e) per year and, where applicable, rated thermal input lower than 35 MW;
Hospital;
Emissions lower than 2500 t CO2(e) per year;
Operated less than 300 hours per year;
The total rated thermal input for all relevant activities pursuant to Annex I to Directive 2003/87/EC.
This item contains at least the following information:
Whether an energy audit report has been issued or a certified energy management system has been implemented for the installation under Article 8 of Directive 2012/27/EU;
Whether there are outstanding recommendations of the energy audit report or the certified energy management system under Article 8 of Directive 2012/27/EU;
Whether the installation is a district heating installation, eligible for additional free allocation pursuant to Article 10b(4) of Directive 2003/87/EC, and its operator intends to apply for the additional free allocation;
For all product-benchmark sub-installations, whether the greenhouse gas emission levels were higher than the 80th percentile of emission levels for the relevant product benchmarks in the years 2016 and 2017;
Whether a climate-neutrality plan in accordance with Implementing Regulation (EU) 2023/2441 has been submitted, where relevant;
Detailed information on the fulfilment of the conditions for free allocation according to Articles 22a and Article 22b.
This item contains a list of all sub-installations at the installation.
This item contains at least the following information for each connected installation or entity:
Name of installation or entity connected;
Type of connection (import or export: measurable heat, waste gases, CO2);
Is the installation or entity itself under the scope of the EU ETS?
If yes, Registry ID and Permit ID, contact person;
If no, name and address of entity, contact person.
This item contains at least the following information:
For each source stream: Activity data, calculation factors used, fossil emissions, emissions from biomass, in case of fuels (including if used as process input) energy input calculated from the Net Calorific Value (NCV);
For each emission source for which continuous emission monitoring systems have been used: fossil emissions, emissions from biomass, annual hourly average of GHG concentration and flue gas flow; in case of CO2: proxy data for energy input associated with the emissions;
Where a fall-back approach in accordance with Article 22 of Regulation (EU) No 601/2012 is used, the fossil and biomass emissions determined, proxy data for energy input associated with the emissions, if applicable;
The amount of transferred CO2 imported and/or exported.
Member States may choose to allow operators to report only aggregated emission figures.
This item contains a complete balance of emissions, identifying the quantity of emissions attributable to each sub-installation.
This item contains at least the following information:
The total amount of energy input used in the installation contained in fuels and in materials (for example exothermic heat from chemical reactions);
If applicable, the energy content of imported waste gases;
If applicable, the amount of energy in fuels exported to other directly technically connected EU ETS installations or non-ETS entities;
If applicable, the energy content of waste gases exported to other EU ETS installations or non-ETS entities;
The amount of energy input from fuels used for electricity production;
The amount of energy input from fuels attributed to fuel benchmark sub-installations (reported separately for carbon leakage and non-carbon leakage fuel benchmark sub-installations) as well as, for each of the respective amounts, how much is used to produce goods listed in Annex I to Regulation (EU) 2023/956;
The amount of fuel and electricity input used for the production of measurable heat;
Total amount of measurable heat produced in the installation;
Net amount of measurable heat imported from installations covered by the EU ETS;
Net amount of measurable heat imported from installations and entities not covered by the EU ETS or included in the EU ETS only for the purposes of Articles 14 and 15 of Directive 2003/87/EC;
Net amount of measurable heat consumed for electricity production within the installation;
Net amount of measurable heat consumed for product benchmark sub-installations within the installation;
Net amount of measurable heat exported to EU ETS installations;
Net amount of measurable heat exported to installations or entities not covered by the EU ETS or included in the EU ETS only for the purposes of Articles 14 and 15 of Directive 2003/87/EC;
Net amount of measurable heat exported for the purpose of district heating;
Net amount of measurable heat attributable to heat benchmark sub-installations (reported separately for carbon leakage and non-carbon leakage heat benchmark and district heating sub-installations) as well as, for each of the respective amounts, how much is used to produce goods listed in Annex I to Regulation (EU) 2023/956;
The amount of heat losses, if not already included in the data referred to in points (a) to (p).
This item contains at least the following information:
Amount of energy input from fuels, electricity and materials (e.g. exothermic heat from chemical reactions), including their respective emissions factor, to:
each product benchmark sub-installation;
each heat benchmark and district heating sub-installation;
each fuel benchmark sub-installation;
Amount of measurable heat imported:
by each product benchmark sub-installation;
from nitric acid product benchmark sub-installations;
from sub-installations producing pulp;
Amount of measurable heat exported by:
each product benchmark sub-installation.
This item contains at least the following information:
Total amount of electricity produced from fuels;
Total amount of other electricity produced;
Total amount of electricity imported from the grid or from other installations;
Total amount of electricity exported to the grid or to other installations;
Total amount of electricity consumed in the installation;
For electricity consumption within product benchmark sub-installations, which are listed in Section 2 of Annex I, the amount of electricity consumed within the system boundaries.
Points (a) to (d) only have to be reported by installations that produce electricity.
This item contains at least the following information:
The amount of measurable heat attributed to sub-installation imported from non-EU ETS entities or processes or installations included in the EU ETS only for the purposes of Articles 14 and 15 of Directive 2003/87/EC;
If applicable, for each sub-installation, a list of products produced within the boundaries of the sub-installation, including their codes under the PRODCOM list referred to in Article 2(2) of Council Regulation (EEC) No 3924/91 [Council Regulation (EEC) No 3924/91 of 19 December 1991 on the establishment of a Community survey of industrial production (OJ L 374, 31.12.1991, p. 1).], based on NACE-4 codes referred to Regulation (EC) No 1893/2006 of the European Parliament and of the Council [Regulation (EC) No 1893/2006 of the European Parliament and of the Council of 20 December 2006 establishing the statistical classification of economic activities NACE Revision 2 and amending Council Regulation (EEC) No 3037/90 as well as certain EC Regulations on specific statistical domains (OJ L 393, 30.12.2006, p. 1).] (NACE rev. 2) and the amount of production. PRODCOM shall be at least as disaggregated as the related sub-sector identification in delegated acts adopted pursuant to Article 10b(5) of Directive 2003/87/EC;
If applicable, for each sub-installation, a list of goods produced within the boundaries of the sub-installation, including their CN codes, and the amount of production;
By way of derogation from point (b), for the carbon leakage heat benchmark sub-installation, where measurable heat is exported to installations or entities not covered by the EU ETS, the NACE-4 codes (NACE rev. 2) of those installations or entities and the CN codes for the goods produced by those installations or entities;
If applicable and available to the operator, for each sub-installation, the emission factor of the fuel mix related to the measurable heat imported or exported;
If applicable, for each sub-installation, the quantity and emission factor of waste gases imported and exported;
If applicable, for each sub-installation, the energy content (net calorific value) of the waste gases imported and exported.
This item contains at least the following information:
Annual production data of the product as specified in Annex I, in the unit listed in that Annex;
A list of products produced within the boundaries of the sub-installation, including their PRODCOM codes (based on NACE rev. 2). PRODCOM shall be at least as disaggregated as the related sub-sector identification in delegated acts adopted pursuant to Article 10b(5) of Directive 2003/87/EC;
If applicable, for each sub-installation, a list of goods produced within the boundaries of the sub-installation, including their CN codes;
Amount of transferred CO2 imported from or exported to other sub-installations, installations or other entities;
The name and amount of export or import of intermediate products covered by product benchmark sub-installations;
If applicable, for the refinery or aromatics product benchmark sub-installations, the annual throughput for each CWT function as specified in Annex II;
If applicable, for the lime or dolime product benchmark sub-installations, the uncorrected annual production quantity and the annual average values for mCaO and mMgO in accordance with Annex III;
If applicable, for the steam cracking product benchmark sub-installation, the total annual HVC production and the quantity of supplementary feed expressed as amounts of hydrogen, ethylene and other HVC;
If applicable, for the synthesis gas product benchmark sub-installations, the annual amount of hydrogen or synthesis gas production referred to hydrogen content expressed as norm cubic metres per year referring to 0 °C and 101,325 kPa and the annual production volume fraction of pure hydrogen in the hydrogen/carbon monoxide mixture;
If applicable, for the ethylene oxide/ethylene glycols product benchmark sub-installation, the annual production levels of ethylene oxide, monoethylene glycol, diethylene glycol and triethylene glycol;
If applicable, for the vinyl chloride monomer product benchmark sub-installation, the heat consumed stemming from hydrogen consumption;
If applicable, for the short fibre kraft pulp, long fibre kraft pulp, thermo-mechanical pulp and mechanical pulp, sulphite pulp product benchmark sub-installations or other pulp not covered by a product benchmark sub-installation, the annual production level of the respective pulp and the annual amount of pulp placed on the market and not processed into paper in the same or other technically connected installations;
If applicable, the amount, energy content and emission factor of waste gases produced within the system boundaries of the respective product benchmark sub-installation and flared within or outside the system boundaries of that product benchmark sub-installation, with the exception of safety flaring, and not used for the purpose of the production of measurable heat, non-measurable heat or electricity.
This item contains at least the following information for each year of the baseline period:
A list of products produced within the boundaries of the sub-installation, including their PRODCOM codes (NACE rev. 2);
if applicable, for each sub-installation, a list of goods produced within the boundaries of the sub-installation, including their CN codes;
Activity level;
Attributed emissions with the exception of emissions linked to the import of measurable heat from other sub-installations, installations or other entities;
Amount of measurable heat imported from other sub-installations, installations or other entities including the emission factor, if known;
Amount of measurable heat exported to other sub-installations, installations or other entities;
Amount, energy content and emission factor of waste gases imported from other sub-installations, installations or other entities;
Amount, energy content and emission factor of waste gases produced;
Amount, energy content and emission factor of waste gases exported to other sub-installations, installations or other entities;
Quantity of electricity consumed within the system boundaries, for benchmarks which are listed in Section 2 of Annex I;
Quantity of electricity produced;
Amount of transferred CO2 imported from other sub-installations, installations or other entities;
Amount of transferred CO2 exported to other sub-installations, installations or other entities;
Export or import of intermediate products covered by product benchmarks (yes/no) and a description of the type of intermediate product, if applicable;
Quantity of supplementary feed expressed as amounts of hydrogen, ethylene and other HVC, in case of the steam cracking product benchmark;
Heat consumed stemming from hydrogen consumption, in case of the for vinyl chloride monomer product benchmark;
Quantity of hydrogen and carbon monoxide produced, for the hydrogen product benchmark.
This item contains at least the following information for each year of the baseline period:
Quantity of net measurable heat produced within each heat benchmark sub-installation or district heating sub-installation;
Quantity of net measurable heat produced from electricity within each heat benchmark sub-installation or district heating sub-installation;
Emissions attributed to production of measurable heat;
Activity level of the sub-installation;
Quantity of measurable heat produced, imported from and exported to other sub-installations, installations or other entities;
Quantity of electricity produced.
This item contains at least the following information for each year of the baseline period:
Activity level;
Attributed emissions.