Art. 10 Regulation (EU) 2019/331

Division into sub-installations

In forcesince 1 Jan 2024cited 10×
1.

For the purposes of data reporting and of monitoring, the operator shall divide each installation eligible for the free allocation of emission allowances under Article 10a of Directive 2003/87/EC into sub-installations. For this purpose, the installation's inputs, outputs and emissions shall be assigned to one or more sub-installations by establishing, where relevant, a method for quantifying specific fractions of relevant inputs, outputs or emissions to be assigned to individual sub-installations.

2.

For attributing the installation's inputs, outputs and emissions to sub-installations, the operator shall carry out the following steps in the descending order:

(a)

if any of the products as specified for product benchmarks listed in Annex I are produced in the installation, the operator shall attribute the related inputs, outputs and emissions to the product benchmark sub-installations, as applicable, applying rules set out in Annex VII;

(b)

if inputs, outputs and emissions qualifying for heat benchmark or district heating sub-installations are relevant at the installation, and do not qualify for any of the sub-installations referred to in point (a), the operator shall attribute them to heat benchmark sub-installations or to district heating sub-installation, as applicable, applying the rules set out in Annex VII;

(c)

if inputs, outputs and emissions qualifying for fuel benchmark sub-installations are relevant at the installation, and do not qualify for any of the sub-installations referred to in points (a) or (b), the operator shall attribute them to fuel benchmark sub-installations, as applicable, applying the rules set out in Annex VII;

(d)

if inputs, outputs and emissions qualifying for process emissions sub-installations are relevant at the installation, and do not qualify for any of the sub-installations referred to in points (a), (b) or (c), the operator shall attribute them to process emissions sub-installations, as applicable, applying the rules set out in Annex VII.

2a.

For product benchmark sub-installations, where relevant, the operator shall clearly distinguish, based on CN codes, and provide evidence to the satisfaction of the competent authority, whether or not the relevant process serves the production of goods listed in Annex I to Regulation (EU) 2023/956 of the European Parliament and Council [Regulation (EU) 2023/956 of the European Parliament and of the Council of 10 May 2023 establishing a carbon border adjustment mechanism (OJ L 130, 16.5.2023, p. 52, ELI: http://data.europa.eu/eli/reg/2023/956/oj).].

3.

For heat benchmark sub-installations, fuel benchmark sub-installations and process emissions sub-installations, the operator shall clearly distinguish, based on NACE and PRODCOM codes, whether or not the relevant process serves a sector or subsector deemed to be at risk of carbon leakage as determined in accordance with Article 10b(5) of Directive 2003/87/EC. In addition, the operator shall distinguish the amount of measurable heat which is exported for the purposes of district heating, from the measurable heat which does not serve a sector or subsector deemed to be at risk of carbon leakage, as determined in accordance with Article 10b(5) of Directive 2003/87/EC.

In addition, the operator shall clearly distinguish, based on CN codes, and provide evidence to the satisfaction of the competent authority, whether or not the relevant process serves the production of goods listed in Annex I to Regulation (EU) 2023/956.

4.

Where an installation included in the EU ETS has produced and exported measurable heat to an installation or other entity not included in the EU ETS, the operator shall consider that the relevant process of the heat benchmark sub-installation for this heat does not serve a sector or subsector deemed to be at risk of carbon leakage as determined in accordance with Article 10b(5) of Directive 2003/87/EC, unless the operator provides evidence to the satisfaction of the competent authority that the consumer of the measurable heat belongs to a sector or subsector deemed to be at risk of carbon leakage, as determined in accordance with Article 10b(5) of Directive 2003/87/EC.

For distinguishing measurable heat attributable to the district heating sub-installation, the operator shall provide evidence to the satisfaction of the competent authority that the measurable heat is exported to district heating.

In addition, where an installation included in the EU ETS has produced and exported measurable heat to an installation or other entity not included in the EU ETS, the operator shall provide evidence on the quantity of measurable heat used to produce goods listed in Annex I to Regulation (EU) 2023/956. Unless the operator provides such evidence to the satisfaction of the competent authority, that heat shall be considered as used to produce goods listed in Annex I of that Regulation.

5.

By carrying out the division in accordance with paragraphs 1 and 2, the operator shall ensure all of the following:

(a)

each of the installation's physical products is attributed to one sub-installation without any omission or double counting;

(b)

100 % of the quantity of all the installation's source streams and emissions as listed in the installation's monitoring plan approved in accordance with Regulation (EU) No 601/2012 are attributed to sub-installations without any omission or double counting, unless they relate to any process non-eligible for free allocation such as the production of electricity in the installation, flaring other than safety flaring which is not covered by a product benchmark sub-installation, or the production of measurable heat exported to other EU ETS installations;

(c)

100 % of the quantity of net measurable heat eligible for free allocation produced within the installation, or imported or exported by the installation, as well as quantities transferred between sub-installations, are attributed to sub-installations without any omission or double counting;

(d)

for all measurable heat produced, imported or exported by sub-installations, it is documented whether the measurable heat was produced within an EU ETS installation, imported from other heat producing processes, imported from non-EU ETS entities or imported from EU ETS installations covered by the EU ETS only for the purposes of Articles 14 and 15 of Directive 2003/87/EC;

(e)

where electricity is produced within the installation, the quantities produced within product benchmark sub-installations are attributed to these sub-installations without any omission or double counting;

(f)

for each product benchmark sub-installation where exchangeability of fuel and electricity is relevant in accordance with section 2 of Annex I, the relevant amount of electricity consumed is separately identified and attributed;

(g)

where a sub-installation has outputs of carbon containing materials in the form of exported fuels, products, by-products, feedstocks for other sub-installations or installations, or waste gases, those outputs are attributed to sub-installations without any omission or double counting, if not covered by point (b);

(h)

CO2 emissions occurring outside the system boundaries of a product benchmark sub-installation resulting from processes listed in points (a) to (f) of Article 2(10) are assigned to a process emissions sub-installation to the extent that it can be demonstrated to the satisfaction of the competent authority that these emissions are direct and immediate results of any of the processes listed in Article 2(10) and that they do not result from the subsequent oxidation of incompletely oxidised carbon in a gaseous state under standard conditions;

(i)

where CO2 emissions from the combustion of waste gas not serving the purpose of the production of measurable heat, non-measurable heat or electricity occur outside the system boundaries of a product benchmark sub-installation as a result of the processes listed in points (a) to (f) of Article 2(10), 75 % of the quantity of the carbon content of the waste gas shall be considered as converted to CO2, and assigned to a process emissions sub-installation;

(j)

for avoiding any double counting, products of a production process returned into the same production process are deducted from annual activity levels, in line with product definitions laid down in Annex I.

(k)

where measurable heat is recovered from processes covered by a fuel benchmark sub-installation, for avoiding double counting, the relevant amount of net measurable heat divided by a reference efficiency of 90 % is subtracted from the fuel input. The recovery of heat from processes covered by a process emissions sub-installation is treated the same way.

  • Regulation (EU) 2019/1842Law

    … přidělování povolenek na emise v důsledku změn činnosti, je vzhledem k tomu, že zařízení jsou v souladu s článkem 10 nařízení v přenesené pravomoci (EU) 2019/331 rozdělena na dílčí zařízení, vhodné tyto změny …

  • Regulation (EU) 2018/206732Law

    … eine Anlage gemäß den Nummern 1, 2 oder 3, und a) die Anlage hat außer einem einzigen Anlagenteil, für den gemäß Artikel 10 Absatz 2 der Delegierten Verordnung (EU) 2019/331 eine Produkt-Benchmark gilt, keinen weiteren …

  • The Greenhouse Gas Emissions Trading Scheme Order 202023Law

    … Regulation and: (a) that installation's only sub-installation is one to which a product benchmark pursuant to Article 10(2) of Delegated Regulation (EU) 2019/331 is applicable; and (b) the production data relevant for the product benchmark …

  • The Greenhouse Gas Emissions Trading Scheme (Amendment) Order 202036Law

    … Regulation and: (a) that installation's only sub-installation is one to which a product benchmark pursuant to Article 10(2) of Delegated Regulation (EU) 2019/331 is applicable; and (b) the production data relevant for the product benchmark …

  • Regulation (EU) 2024/873Lawamends

  • Opinion of Advocate General Hogan delivered on 3 June 2021.Decision

    … nur zugeordnet werden, wenn sie unter keinen anderen Anlagenteil mit Benchmark fallen [Diesem Ansatz folgt jetzt auch Art. 10 Abs. 2 der Delegierten Verordnung (EU) 2019/331 der Kommission vom 19. Dezember 2018 zur Festlegung EU-weiter …

    3 Jun 2021 · 62020CC0126

  • Regulation (EU) 2020/20841Law

    … eine Anlage gemäß den Nummern 1, 2 oder 3, und a) die Anlage hat außer einem einzigen Anlagenteil, für den gemäß Artikel 10 Absatz 2 der Delegierten Verordnung (EU) 2019/331 eine Produkt-Benchmark gilt, keinen weiteren …

  • Arrêt du Tribunal (cinquième chambre) du 20 novembre 2024. Imerys Aluminates Groupe contre Commission européenne.Decision

    20 Nov 2024 · 62023TJ0391

  • Arrêt du Tribunal (cinquième chambre) du 20 novembre 2024. Imerys Aluminates Groupe contre Commission européenne.Decision

    En particulier, il ressort de l’article 11, paragraphe 3, de la directive 2003/87 que la Commission accepte ou refuse les « mesures nationales d’exécution » au début de chaque période d’application du SEQE. Ces mesures …

    20 Nov 2024 · 62023TJ0391

  • Commission Implementing Regulation (EU) 2019/1842 of 31 October 2019 laying down rules f…Law

    … allowances due to changes in activity, since the installations are divided in sub-installations in accordance with Article 10 of Delegated Regulation (EU) 2019/331, it is appropriate to compare these changes against the historical activity …