3 ANNEX III Historical activity level for specific benchmarks referred to in Articles 15(8) and 17(f), Regulation (EU) 2019/331

In forcesince 1 Jan 2024
1.

The product-related historical activity level for the baseline period for products to which the refinery product benchmark as referred to in Annex I applies on the basis of the different CWT functions, their definitions, the basis for throughput as well as the CWT factors as listed in Annex II, shall be determined according to the following formula:

HALCWTMEDIAN1,0183×

ni1

TPi,k × CWTi2980,315× TPAD,k

whereby:

HALCWThistorical activity level expressed as CWT

TPi,kthroughput of the CWT function i in year k of the baseline period

CWTiCWT factor of the CWT function i

TPAD,kthroughput of the CWT function ‘Atmospheric Crude Distillation’ in year k of the baseline period

2.

The product-related historical activity level for the baseline period for products to which the lime product benchmark as referred to in Annex I applies shall be determined according to the following formula:

HALlime,standardMEDIAN785 × mCaO,k1 092 × mMgO,k

751,7

× HALlime,uncorrected,k

whereby:

HALlime,standardhistorical activity level for lime production expressed in tons of standard pure lime

mCaO,kcontent of free CaO in the produced lime in year k of the baseline period expressed as mass-%

mMgO,kcontent of free MgO in the produced lime in year k of the baseline period expressed as mass-%

HALlime,uncorrected,kuncorrected historical activity level for lime production in year k of the baseline period expressed in tonnes of lime

3.

The product-related historical activity level for the baseline period for products to which the dolime product benchmark as referred to in Annex I applies shall be determined according to the following formula:

HALdolime,standardMEDIAN785 × mCaO,k1 092 × mMgO,k

865,6

× HALdolime,uncorrected,k

whereby:

HALdolime,standardhistorical activity level for dolime production expressed in tonnes of standard pure dolime

mCaO,kcontent of free CaO in the produced dolime in year k of the baseline period expressed as mass-%

mMgO,kcontent of free MgO in the produced dolime in year k of the baseline period expressed as mass-%

HALdolime,uncorrected,kuncorrected historical activity level for dolime production in year k of the baseline period expressed in tonnes of lime

4.

The product-related historical activity level for the baseline period for products to which the steam cracking product benchmark as referred to in Annex I applies shall be determined according to the following formula:

HALHVC,netMEDIANHALHVC,total,k – HSFH,k – HSFE,k – HSFO,k

whereby:

HALHVC,nethistorical activity level for high value chemicals net of high value chemicals produced from supplemental feed expressed in tonnes of HVC

HALHVC,total,khistorical activity level for total high value chemicals production in year k of the baseline period expressed in tonnes of HVC

HSFH,khistorical supplemental feed of hydrogen in year k of the baseline period expressed in tonnes of hydrogen

HSFE,khistorical supplemental feed of ethylene in year k of the baseline period expressed in tonnes of ethylene

HSFO,khistorical supplemental feed of other high value chemicals than hydrogen and ethylene in year k of the baseline period expressed in tonnes of HVC

5.

The product-related historical activity level for the baseline period for products to which the aromatics product benchmark as referred to in Annex I applies on the basis of the different CWT functions, their definitions, the basis for throughput as well as the CWT factors as listed in Annex II shall be determined according to the following formula:

HALCWTMEDIAN

ni1

TPi,k × CWTi

whereby:

HALCWThistorical activity level expressed as CWT

TPi,kthroughput of the CWT function i in year k of the baseline period

CWTiCWT factor of the CWT function i

6.

Where a mixture of hydrogen and carbon monoxide is produced, the product-related historical activity level for the baseline period for products to which the hydrogen product benchmark as referred to in Annex I applies shall be determined according to the following formula:

HALH2MEDIANHALH2,actHALH2,WGS ×

Emact

EmactEmWGS

whereby:

HALH2historical activity level for hydrogen production referred to 100 % hydrogen

HALH2,actactual hydrogen production

HALH2, WGSadditional hydrogen production under theoretical complete water gas shift (WGS) reaction, calculated via the stoichiometric ratio as HALCO, act × 0,071967 t H2/tCO for the WGS reaction

HALCO, actactual carbon monoxide production

Emactactual emissions related to hydrogen production

EmWGSadditional emissions related to hydrogen production from theoretical complete WGS reaction

The actual emissions related to hydrogen production shall be determined as follows:

EmactDirEmact – Heatexport,act × BMheat

whereby:

Emactactual emissions related to hydrogen production

DirEmactactual direct emissions excluding heat-related emissions, prior to any carbon capture for use or geological storage. For emissions stemming from biomass, the emissions shall be calculated as the energy content from biomass multiplied with the emission factor of natural gas instead of the actual emissions

Heatexport,actactual net heat export

BMheatthe value of the heat benchmark for measurable heat for the relevant allocation period

The additional emissions related to hydrogen production from theoretical complete water gas shift shall be determined as follows:

EmWGSCOWGS ×

MCO2

MCO

–

Heatexport, WGS × BMheat

whereby:

COWGSthe amount of CO produced prior to the additional theoretical conversion into CO2 via the WGS reaction

MCO2molecular mass of CO2 (44,01 g/mol)

MCOmolecular mass of CO (28,01 g/mol)

Heatexport,WGStheoretical additional net heat export after full WGS reaction assuming 99,5 % heat recovery, calculated via the reaction enthalpy of the WGS reaction (–20,439 GJ/t H2 produced) multiplied with HALH2,WGS and with the 99,5 % efficiency of recovery

BMheatthe value of the heat benchmark for measurable heat for the relevant allocation period

7.

The product-related historical activity level for the baseline period for products to which the synthesis gas (syngas) product benchmark as referred to in Annex I applies shall be determined according to the following formula:

HALsyngasMEDIANHALH2CO,k × 1 –0,47– VFH2,k

0,0863

×0,0007047

t

Nm3

whereby:

HALsyngashistorical activity level for synthesis gas production referred to 47 % hydrogen

VFH2,khistorical production volume fraction of pure hydrogen in the total volume of hydrogen and carbon monoxide in year k of the baseline period

HALH2+CO,khistorical activity level for synthesis gas production referred to historical hydrogen content expressed as norm cubic meters per year referring to 0 °C and 101,325 kPa in year k of the baseline period

8.

The product-related historical activity level for the baseline period for products to which the ethylene oxide/ethylene glycols product benchmark as referred to in Annex I applies shall be determined according to the following formula:

HALEOEGMEDIAN

ni1

HALi,k × CFEOE,i

whereby:

HALEO/EGhistorical activity level for ethylene oxide/ethylene glycols production expressed in tonnes of ethylene oxide equivalents

HALi,k:historical activity level for the production of the ethylene oxide or glycol i in year k of the baseline period expressed in tonnes

CFEOE,Iconversion factor for the ethylene oxide or glycol i relative to ethylene oxide

Following conversion factors shall be applied:

Ethylene oxide: 0,926

Monoethylene glycol: 0,717

Diethylene glycol: 1,174

Triethylene glycol: 1,429