ANNEX I, Regulation (EU) 2019/331

In forcesince 1 Jan 2024cited 1×

Product benchmark | Definition of products covered | Definition of processes and emissions covered (system boundaries) |

Starting point for determination of annual reduction rate for benchmark value update

(allowances/t)

Coke | Coke-oven coke (obtained from the carbonisation of coking coal, at high temperature) or gas-works coke (by-product of gas-works plants) expressed in tonnes of dry coke, determined at the discharge of the coke oven or gas-works plant. Lignite coke is not covered by this benchmark. Coking in refineries is not included but covered by the CWT methodology for refineries. | All processes directly or indirectly linked to the process units coke ovens, H2S/NH3 incineration, coal preheating (defreezing), coke gas extractor, desulphurisation unit, distillation unit, steam generation plant, pressure control in batteries, biological water treatment, miscellaneous heating of by-products and hydrogen separator are included. Coke oven gas cleaning is included. | 0,286

Agglomerated iron ore | Agglomerated iron-bearing product containing iron ore fines, fluxes and possibly iron-containing recycling materials with the chemical and physical properties such as the level of basicity, mechanical strength and permeability required to deliver iron and necessary flux materials into iron ore reduction processes. Expressed in tonnes of agglomerated ore as leaving the agglomerated iron ore production plant. Agglomerated iron ore returned to the production process is not to be considered as part of the product. | All processes directly or indirectly linked to the production of agglomerated iron ore are included. | 0,171

Hot metal |

Iron produced from iron ores for primary steelmaking including (a) liquid iron saturated with carbon for further processing, considered as product of blast furnaces, and expressed in tonnes of liquid iron at the exit point of the blast furnace, excluding liquid iron produced from sponge iron under (b);

(b)

sponge iron at the exit point of a direct reduced iron reactor, and expressed in tonnes of sponge iron at the exit point of the direct reduced iron reactor. Similar products such as ferroalloys are not covered by this product benchmark. Residual material and by-products are not to be considered as part of the product.

All processes directly or indirectly linked to the process units blast furnace, hot metal treatment units, blast furnace blowers, blast furnace hot stoves, direct reduced iron reactor, electric arc furnace and electric smelting furnace for sponge iron, basic oxygen furnace, secondary metallurgy units, vacuum ladles, casting units (including cutting), slag treatment unit, burden preparation, BF and other gas treatment units, dedusting units, scrap pre-heating, coal drying for PCI, vessels preheating stands, casting ingots preheating stands, compressed air production, dust treatment unit (briquetting), sludge treatment unit (briquetting), steam injection in BF unit, steam generation plant, converter BOF gas cooling and miscellaneous are included. | 1,328

Pre-bake anode | Anodes for aluminium electrolysis use consisting of petrol coke, pitch and normally recycled anodes, which are formed to shape specifically intended for a particular smelter and baked in anode baking ovens to a temperature of around 1150 °C. Söderberg anodes are not covered by this product benchmark. | All processes directly or indirectly linked to the production of pre-bake anodes are included. | 0,324

Aluminium | Unwrought non-alloy liquid aluminium from electrolysis. Expressed in tonnes measured between the electrolysis section and the holding furnace of the cast house, before alloys and secondary aluminium are added. | All processes directly or indirectly linked to the production step electrolysis are included. Emissions resulting from holding furnaces and casting, and emissions related to anode productions are excluded. | 1,514

Grey cement clinker |

Grey cement clinker or alternative hydraulic binders for the production of cement, as total amount of hydraulic binder produced.

Products produced within the system boundaries of other product benchmarks or as by-product or waste of other production processes are not covered by this benchmark, including fly ash, blast-furnace slag, steel slag, silica fume, paper sludge.

All processes directly or indirectly linked to the production of grey cement clinker or alternative hydraulic binders are included. | 0,766

White cement clinker |

White cement clinker or alternative hydraulic binders for use as main binding component in the formulation of materials such as joint filers, ceramic tile adhesives, insulation, and anchorage mortars, industrial floor mortars, ready mixed plaster, repair mortars, and water-tight coatings with maximum average contents of 0,4 mass-% Fe2O3, 0,003 mass-% Cr2O3 and 0,03 mass-% Mn2O3. Expressed in tonnes of hydraulic binders (as 100 % clinker/alternative hydraulic binders).

Products produced within the system boundaries of other product benchmarks or as by-product or waste of other production processes are not covered by this benchmark, including fly ash, blast-furnace slag, steel slag, silica fume, paper sludge.

All processes directly or indirectly linked to the production of white cement clinker or alternative hydraulic binders are included. | 0,987

Lime | Quicklime: calcium oxide (CaO) produced by the decarbonation of limestone (CaCO3). Expressed in tonnes of ‘standard pure’ defined as lime with a free CaO content of 94,5 %. Lime produced and consumed in the same installation for purification processes is not covered by this product benchmark. The internal lime production of the pulp sector is already covered by the respective pulp benchmarks and is therefore not eligible for additional allocation based on the lime benchmark. | All processes directly or indirectly linked to the production of lime are included. | 0,954

Dolime |

Dolime or calcined dolomite as mixture of calcium and magnesium oxides produced by the decarbonation of dolomite (CaCO3 · MgCO3) with a residual CO2 exceeding 0,25 %, a free MgO content between 25 % and 40 % and a bulk density of the commercial product below 3,05 g/cm3.

Dolime shall be expressed as ‘standard pure dolime’ quality with a free CaO content of 57,4 % and a free MgO content of 38,0 %.

All processes directly or indirectly linked to the production of dolime are included, in particular fuel preparation, calcination/sintering and flue gas treatment. | 1,072

Sintered dolime | Mixture of calcium and magnesium oxides used solely for the production of refractory bricks and other refractory products with a minimum bulk density of 3,05 g/cm3. Expressed in tonnes of saleable sintered dolime. | All processes directly or indirectly linked to the production of sintered dolime are included. | 1,449

Float glass | Float/ground/polish glass. (as tons of glass exiting the lehr). | All processes directly or indirectly linked to the production steps melter, refiner, working end, bath and lehr are included. Finishing workshops that can be physically separated from the upstream process, such as offline coating, laminating and toughening are excluded. | 0,453

Bottles and jars of colourless glass | Bottles of colourless glass of a nominal capacity < 2,5 litres, produced in a furnace where there is no deliberate addition of colour for beverages and foodstuffs (excluding bottles covered with leather or composition leather; infant's feeding bottles) except extra-white flint products with an iron oxide content expressed as percent Fe2O3 by weight lower than 0,03 % and colour co-ordinates of L in the range 100 to 87, of a in the range 0 to – 5 and of b in the range 0 to 3 (using the CIELAB advocated by the Commission Internationale d'éclairage) expressed as tonnes of packed product. | All processes directly or indirectly linked to the production steps materials handling, melting, forming, downstream processing, packaging and ancillary processes are included. | 0,382

Bottles and jars of coloured glass | Bottles of coloured glass of a nominal capacity < 2,5 litres, for beverages and foodstuffs (excluding bottles covered with leather or composition leather; infant's feeding bottles), not meeting the definition of the product benchmark for bottles and jars of colourless glass, expressed as tonnes of packed product. | All processes directly or indirectly linked to the production steps materials handling, melting, forming, downstream processing, packaging and ancillary processes are included. | 0,306

Continuous filament glass fibre products |

Melted glass for the production of continuous filament glass fibre products namely chopped strands, rovings, yarns and staple glass fibre and mats, expressed as tonnes of melted glass exiting the forehearth calculated from the quantity of raw material input into the furnace after subtraction of the volatile gaseous emissions.

Mineral wool products for thermal, acoustic and fire insulation are not covered by this benchmark.

All processes directly or indirectly linked to the production processes glass melting in the furnaces and glass refining in the forehearths are included, in particular direct CO2 emissions associated to these process CO2 emissions resulting from the decarbonatisation of the glass mineral raw materials during the melting process. Downstream processes to convert the fibres into sellable products are not included in this product benchmark. Supporting processes such as material handling are ragarded as utilities and are outside the system boundaries. | 0,406

Facing bricks | Facing bricks with a density > 1000 kg/m3 used for masonry based on EN 771-1, excluding pavers, clinker bricks and blue braised facing bricks. | All processes directly or indirectly linked to the production processes raw material preparation, component mixing, forming and shaping of ware, drying of ware, firing of ware, product finishing and flue gas cleaning are included. | 0,139

Pavers | Clay bricks of any color used for flooring according to EN 1344. Expressed in tonnes of paves as net saleable product. | All processes directly or indirectly linked to the production processes raw material preparation, component mixing, forming and shaping of ware, drying of ware, firing of ware, product finishing and flue gas cleaning are included. | 0,192

Roof tiles | Clay roofing tiles as defined in EN 1304:2005 excluding blue braised roof tiles and accessories. Expressed in tonnes of saleable roof tiles. | All processes directly or indirectly linked to the production processes raw material preparation, component mixing, forming and shaping of ware, drying of ware, firing of ware, product finishing and flue gas cleaning are included. | 0,144

Spray dried powder | Spray-dried powder for the production of dry-pressed wall and floor tiles. Expressed in tonnes of powder produced. | All processes directly or indirectly linked to the production of spray-dried powder are included. | 0,076

Plaster |

Plasters consisting of calcined gypsum or calcium sulphate (including for use in building, for use in dressing woven fabrics or surfacing paper, for use in dentistry, for use in land remediation), in tonnes of stucco (saleable production).

Alpha plaster, plaster that is further processed to plasterboard and the production of the intermediate product dried secondary gypsum are not covered by this product benchmark.

All processes directly or indirectly linked to the production steps milling, drying and calcining are included. | 0,048

Dried secondary gypsum | Dried secondary gypsum (synthetic gypsum produced as a recycled by-product of the power industry or recycled material from construction waste and demolition) expressed as tonnes of product. | All processes directly or indirectly linked to the drying of secondary gypsum are included | 0,017

Short fibre kraft pulp | Short fibre kraft pulp is a wood pulp produced by the sulphate chemical process using cooking liquor, characterised by fibre lengths of 1 – 1,5 mm, which is mainly used for products which require specific smoothness and bulk, as tissue and printing paper, expressed as net saleable production in air dried tonnes, measured at the end of the production process, Air dry metric tonne of pulp meaning dry solids content of 90 %. | All processes which are part of the pulp production process (in particular the pulp mill, recovery boiler, pulp drying section and lime kiln and connected energy conversion units (boiler/CHP)) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,12

Long fibre kraft pulp | Long fibre kraft pulp is a wood pulp produced by the sulphate chemical process using cooking liquor, characterised by fibre lengths of 3 – 3,5 mm, including bleached and unbleached pulp, expressed as net saleable production in air dried tonnes, measured at the end of the production process. Air dry metric tonne of pulp meaning dry solids content of 90 %. | All processes which are part of the pulp production process (in particular the pulp mill, recovery boiler, pulp drying section and lime kiln and connected energy conversion units (boiler/CHP)) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,06

Sulphite pulp, thermo-mechanical and mechanical pulp |

Sulphite pulp produced by a specific pulp making process, e.g. pulp produced by cooking wood chips in a pressure vessel in the presence of bisulphite liquor expressed as net saleable production in air dried metric tonnes measured at the end of the production process. Air dry metric tonne of pulp meaning dry solids contents of 90 %. Sulphite pulp can be either bleached or unbleached.

Mechanical pulp grades: TMP (thermomechanical pulp) and groundwood as net saleable production in air dried metric tonnes measured at the end of the production process. Air dry metric tonne of pulp meaning dry solids contents of 90 %. Mechanical pulp can be either bleached or unbleached.

Not covered by this group are the smaller subgroups of semichemical pulp CTMP – chemi-thermomechanical pulp and dissolving pulp.

All processes which are part of the pulp production process (in particular the pulp mill, recovery boiler, pulp drying section and lime kiln and connected energy conversion units (boiler/CHP)) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,02

Recovered paper pulp |

Pulps of fibres derived from recovered (waste and scrap) paper or paperboard or of other fibrous cellulosic material expressed in tonnes of saleable production in air dried metric tonnes measured at the end of the production process. Air dry metric tonne of pulp meaning dry solids contents of 90 %.

In case of pulp production, the production is defined as the total pulp produced including both pulp for internal delivery to a paper mill and market pulp.

All processes which are part of the production of pulp from recovered paper and connected energy conversion units (boiler/CHP)) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,039

Newsprint | Specific paper grade (in rolls or sheets) expressed as net saleable production in air dried tonnes, defined as paper with 6 % moisture content. | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,298

Uncoated fine paper |

Uncoated fine paper, covering both uncoated mechanical and uncoated woodfree expressed as net saleable production in air dried tonnes, defined as paper with 6 % moisture content.

1.

Uncoated woodfree papers covers papers suitable for printing or other graphic purposes made from a variety of mainly virgin fibre furnishes, with variable levels of mineral filler and a range of finishing processes.

2.

Uncoated mechanical papers cover the specific paper grades made from mechanical pulp, used for packaging or graphic purposes/magazines.

All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,318

Coated fine paper | Coated fine paper covering both coated mechanical and coated woodfree papers expressed as net saleable production in air dried tonnes, defined as paper with 6 % moisture content. | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,318

Tissue | Tissue papers, covering a wide range of tissue and other hygienic papers for use in households or commercial and industrial premises such as toilet paper and facial tissues, kitchen towels, hand towels and industrial wipes, the manufacture of baby nappies, sanitary towels, etc. TAD – Through Air Dried Tissue is not part of this group. Expressed as tonnes of net saleable production of parent reel in air dried tonnes, defined as paper with 6 % moisture content. | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. The conversion of parent reel to finished products is not part of this product benchmark. | 0,334

Testliner and fluting |

Testliner and fluting expressed as net saleable production in air dried tonnes defined as paper with 6 % moisture content.

1.

Testliner covers types of paperboard that meet specific tests adopted by the packaging industry to qualify for use as the outer facing layer for corrugated board, from which shipping containers are made.

2.

Fluting refers to the centre segment of corrugated shipping containers, being faced with linerboard (testliner/kraftliner) on both sides. Fluting covers mainly papers made from recycled fibre but this group also holds paperboard that is made from chemical and semi-chemical pulp. Kraftliner is not inluded in this product benchmark.

All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,248

Uncoated carton board | Various uncoated products (expressed as net saleable production in air dried tonnes, defined as paper with 6 % moisture content) which may be single or multiply. Uncoated carton board is mainly used for packaging applications which the main needed characteristic is strength and stiffness, and for which the commercial aspects as information carrier are of a second order of importance. Carton board is made from virgin and/or recovered fibres, has good folding properties, stiffness and scoring ability. It is mainly used in cartons for consumer products such as frozen food, cosmetics and for liquid containers; also known as solid board, folding box board, boxboard or carrier board or core board. | All processes which are part of the paper production process (in particular paper or board machine and connected energy conversion units (boiler/CHP) and direct process fuel use) are included. Other activities on site that are not part of this process such as sawmilling activities, woodworking activities, production of chemicals for sale, waste treatment (treating waste onsite instead of offsite (drying, pelletising, incinerating, landfilling), PCC (precipitated calcium carbonate) production, treatment of odorous gases, and district heating are not included. | 0,237

This article is long: the rest is at the official publication.