Art. 3 Regulation (EU) 2017/2400

Definitions

In forcesince 1 Jul 2022cited 7×

For the purposes of this Regulation, the following definitions shall apply:

(1)

‘CO2 emissions and fuel consumption related properties’ means specific properties derived for a component, separate technical unit and system which determine the impact of the part on the CO2 emissions and fuel consumption of a vehicle;

(2)

‘input data’ means information on the CO2 emissions and fuel consumption related properties of a component, separate technical unit or system which is used by the simulation tool for the purpose of determining CO2 emissions and fuel consumption of a vehicle;

(3)

‘input information’ means information relating to the characteristics of a vehicle which is used by the simulation tool for the purposes of determining their CO2 emissions and fuel consumption of the vehicle and which is not part of an input data;

(4)

‘manufacturer’ means the person or body who is responsible to the approval authority for all aspects of the certification process and for ensuring conformity of CO2 emissions and fuel consumption related properties of components, separate technical units and systems. It is not essential that the person or body be directly involved in all stages of the construction of the component, separate technical unit or system which is the subject of the certification.

(4a)

‘vehicle manufacturer’ means a body or person responsible for issuing the manufacturer's records file and the customer information file pursuant to Article 9;

(5)

‘authorised entity’ means a national authority authorised by a Member State to request relevant information from the manufacturers and vehicle manufacturers on the CO2 emissions and fuel consumption related properties of a specific component, specific separate technical unit or specific system and CO2 emissions and fuel consumption of new vehicles respectively.

(6)

‘transmission’ means a device consisting of at least of two shiftable gears, changing torque and speed with defined ratios;

(7)

‘torque converter’ means a hydrodynamic start-up component either as a separate component of the driveline or transmission with serial or parallel power flow that adapts speed between engine and wheel and provides torque multiplication;

(8)

‘other torque transferring component’ or ‘OTTC’ means a rotating component attached to the driveline which produces torque losses dependent on its own rotational speed;

(9)

‘additional driveline component’ or ‘ADC’ means a rotating component of the driveline which transfers or distributes power to other driveline components and produces torque losses dependant on its own rotational speed;

(10)

‘axle’ means a component comprising all rotating parts of the driveline which transfer the driving torque coming from the prop shaft to the wheels and changes the torque and speed with a fixed ratio and including the functions of a differential gear;

(11)

‘air drag’ means characteristic of a vehicle configuration regarding aerodynamic force acting on the vehicle in the direction of air flow and determined as a product of the drag coefficient and the cross sectional area for zero crosswind conditions;

(12)

‘auxiliaries’ means vehicle components including an engine fan, steering system, electric system, pneumatic system and Heating, Ventilation and Air Conditioning (HVAC) system whose CO2 emissions and fuel consumption properties have been defined in Annex IX;

(13)

‘component family’, ‘separate technical unit family’ or ‘system family’ means a manufacturer's grouping of components, separate technical units or systems, respectively, which through their design have similar CO2 emissions and fuel consumption related properties;

(14)

‘parent component’, ‘parent separate technical unit’ or ‘parent system’ means a component, separate technical unit or system, respectively, selected from a component, separate technical unit or system family, respectively, in such a way that its CO2 emissions and fuel consumption related properties will be the worst case for that component family, separate technical unit family or system family;

(15)

‘zero emission heavy-duty vehicle’ (Ze-HDV) means ‘zero emission heavy-duty vehicle’ as defined in Article 3, point (11), of Regulation (EU) 2019/1242 of the European Parliament and of the Council;

(16)

‘vocational vehicle’ means a heavy-duty vehicle not intended for the delivery of goods and for which one of the following digits is used to supplement the bodywork codes, as listed in Appendix 2 to Annex I to Regulation (EU) 2018/858: 09, 10, 15, 16, 18, 19, 20, 23, 24, 25, 26, 27, 28, 31; or a tractor with a maximum speed not exceeding 79 km/h;

(17)

‘rigid lorry’ means a ‘lorry’ as defined in Part C, point 4.1, of Annex I to Regulation (EU) 2018/858, except for the lorries designed or constructed for the towing of a semi-trailer;

(18)

‘tractor’ means a ‘tractor unit for semi-trailer’ as defined in Part C, point 4.3, of Annex I to Regulation (EU) 2018/858

(19)

‘sleeper cab’ means a type of cabin that has a compartment behind the driver's seat intended to be used for sleeping;

(20)

‘hybrid electric heavy-duty vehicle’ (He-HDV) means a hybrid heavy duty vehicle that, for the purpose of mechanical propulsion, draws energy from both of the following on-vehicle sources of stored energy or power: (i) a consumable fuel, and (ii) an electrical energy or power storage device;

(21)

‘dual-fuel vehicle’ is as defined in Article 2(48) of Regulation (EU) No 582/2011;

(22)

‘primary vehicle’ means a heavy bus in a virtual assembly condition determined for simulation purposes, for which the input data and input information as set out in Annex III is used;

(23)

‘manufacturer’s records file’ means a file produced by the simulation tool which contains manufacturer related information, a documentation of the input data and input information to the simulation tool and the results for CO2 emissions and fuel consumption;

(24)

‘customer information file’ means a file produced by the simulation tool which contains a defined set of vehicle related information and the results for CO2 emissions and fuel consumption as defined in Part II of Annex IV;

(25)

‘vehicle information file’ (VIF) means a file produced by the simulation tool for heavy buses to transfer the relevant input data, input information and simulation results to subsequent manufacturing stages following the method as described in point (2) of Annex I;

(26)

‘medium lorry’ means a vehicle of category N2, as defined in Article 4(1), point (b)(ii), of Regulation (EU) 2018/858, with a technically permissible maximum laden mass exceeding 5000 kg and not exceeding 7400 kg;

(27)

‘heavy lorry’ means a vehicle of category N2, as defined in Article 4(1), point (b)(ii), of Regulation (EU) 2018/858, with a technically permissible maximum laden mass exceeding 7400 kg and a vehicle of category N3, as defined in Article 4(1), point (b)(iii), of that Regulation;

(28)

‘heavy bus’ means a vehicle of category M3, as defined in Article 4(1), point (a)(iii), of Regulation (EU) 2018/858, with a technically permissible maximum laden mass of more than 7500 kg;

(29)

‘primary vehicle manufacturer’ means a manufacturer responsible for the primary vehicle;

(30)

‘interim vehicle’ means any further completion of a primary vehicle where a sub-set of input data and input information as defined for the complete or completed vehicle in accordance with Table 1 and Table 3a of Annex III is added and/or modified;

(31)

‘interim manufacturer’ means a manufacturer responsible for an interim vehicle;

(32)

‘incomplete vehicle’ means ‘incomplete vehicle’ as defined in Article 3, point (25), of Regulation (EU) 2018/858;

(33)

‘completed vehicle’ means ‘completed vehicle’ as defined in Article 3, point (26), of Regulation (EU) 2018/858;

(34)

‘complete vehicle’ means ‘complete vehicle’ as defined in Article 3, point (27), of Regulation (EU) 2018/858;

(35)

‘standard value’ is input data for the simulation tool for a component where certification of input data is applicable, but the component has not been tested to determine a specific value and which reflects the worst-case performance of a component;

(36)

‘generic value’ is data used in the simulation tool for components or vehicle parameters where no component testing or declaration of specific values is foreseen and which reflects performance of average component technology or typical vehicle specifications;

(37)

‘van’ means a ‘van’ as defined in Part C, point 4.2, of Annex I to Regulation (EU) 2018/858;

(38)

‘application case’ means the different scenarios to be followed in the case of a medium lorry, heavy lorry, heavy bus that is a primary vehicle, heavy bus that is an interim vehicle, heavy bus that is a complete vehicle or completed vehicle for which different manufacturer provisions and functions are applicable in the simulation tool;

(39)

‘base lorry’ means a medium lorry or heavy lorry equipped at least with:

a chassis, engine, transmission, axles and tyres, in the case of pure internal combustion engine vehicles;

a chassis, electric machine system and/or integrated electric powertrain component, battery system(s) and/or capacitor system(s) and tyres, in the case of pure electric vehicles;

a chassis, engine, electric machine system and/or integrated electric powertrain component and/or integrated hybrid electric vehicle powertrain component type 1, battery system(s) and/or capacitor system(s) and tyres, in the case of hybrid electric heavy-duty vehicles.

With regard to He-HDVs, Articles 5(3), 9(1) and 12(1) shall apply only to He-HDVs where the second highest maximum net power of all energy converters is less than 10 % of the highest maximum net power of all energy converters. Energy converters used only for the starting are in this respect not taken into consideration.

  • Regulation (EU) 2019/124237a7bLaw

    … be exempted from the obligations laid down in Article 3a(1), (2) and (3) is not exempted from those obligations. [Article 3, point (29), of Regulation (EU) 2017/2400] [Article 3, point (31), of Regulation (EU) 2017/2400] [Article 3, point …

  • Regulation (EU) 2024/16101Law

    … would otherwise be exempted from the obligations laid down in Article 3a is not exempted from those obligations. [Article 3, point (29), of Regulation (EU) 2017/2400] [Article 3, point (31), of Regulation (EU) 2017/2400] [Article 3, point …

  • Regulation (EU) 2022/1379Lawamends

  • Regulation (EU) 2019/318Lawamends

  • Regulation (EU) 2020/1181Lawamends

  • Regulation (EU) 2025/21611Law

    За целите на настоящия регламент се прилагат определенията по член 3 от Регламент (ЕС) 2017/2400, точка 2 от приложение III, точка 2 от …

  • Regulation (EU) 2024/11272Law

    … се прилагат определенията в член 3 от Регламент (ЕС) 2019/1242 и член 3 от Регламент (ЕС) 2017/2400. Прилагат се също така следните …