A vehicle manufacturer shall determine the CO2 emissions and fuel consumption of each new vehicle, with the exception of new vehicles using vehicle technologies listed in Appendix 1 to Annex III, to be sold, registered or put into service in the Union using the latest available version of the simulation tool referred to in Article 5(3). With regard to heavy buses the vehicle manufacturer or interim manufacturer shall use the method set out in Annex I, point (2).
For vehicle technologies listed in Appendix 1 to Annex III to be sold, registered or put into service in the Union, the vehicle manufacturer or interim manufacturer shall determine only the input parameters specified for those vehicles in the models set out in Table 5 of Annex III, using the latest available version of the simulation tool referred to in Article 5(3).
A vehicle manufacturer may operate the simulation tool for the purposes of this Article only if in possession of a licence granted for the application case concerned in accordance with Article 7. An interim manufacturer operates the simulation tool under the licence of a vehicle manufacturer.
The vehicle manufacturer shall record the results of the simulation performed in accordance with the first subparagraph of paragraph 1 in the manufacturer's records file drawn up in accordance with the model set out in Part I of Annex IV.
With the exception of the cases referred to in the second subparagraph of Article 21(3), and in Article 23(6), any subsequent changes to the manufacturer's records file shall be prohibited.
Vehicle manufacturers of heavy buses additionally shall record the results of the simulation in the vehicle information file. Interim manufacturers of heavy buses shall record the vehicle information file.
The vehicle manufacturer of medium lorries and heavy lorries shall create cryptographic hashes of the manufacturer’s records file and of the customer information file.
The primary vehicle manufacturer shall create cryptographic hashes of the manufacturer’s records file and of the vehicle information file.
The interim manufacturer shall create the cryptographic hash of the vehicle information file.
The vehicle manufacturer of complete vehicles or completed vehicles that are heavy buses, shall create cryptographic hashes of the manufacturer’s records file, of the customer information file and of the vehicle information file.
Lorries and complete vehicles or completed vehicles that are heavy buses to be registered, sold or to enter into service shall be accompanied by the customer information file drawn up by the manufacturer in accordance with the model set out in Part II of Annex IV.
Each customer information file shall include an imprint of the cryptographic hash of the manufacturer's records file referred to in paragraph 3.
Vehicle manufacturers of heavy buses shall make the vehicle information file available to the manufacturer of a subsequent step in the chain.
For each vehicle accompanied by a certificate of conformity or, in the case of vehicles approved in accordance with Article 45 of Regulation (EU) 2018/858, an individual vehicle approval certificate, the certificate shall include an imprint of the cryptographic hashes referred to in paragraph 3 of this Article.
In accordance with point 11 of Annex III, a manufacturer may transfer results of the simulation tool to other vehicles.