In the case of modifications or updates to the simulation tool, the vehicle manufacturer shall start using the modified or updated simulation tool no later than 3 months after the modifications and updates were made available on the dedicated electronic distribution platform.
If the CO2 emissions and fuel consumption of new vehicles cannot be determined in accordance with Article 9(1) due to a malfunction of the simulation tool, the vehicle manufacturer shall notify the Commission thereof without delay by means of the dedicated electronic distribution platform.
If the CO2 emissions and fuel consumption of new vehicles cannot be determined in accordance with Article 9(1) due to a malfunction of the simulation tool, the vehicle manufacturer shall perform the simulation of those vehicles not later than 7 calendar days after the date referred to in point 1. Until then, the obligations resulting from Article 9 for the vehicles for which the determination of fuel consumption and CO2 emissions remains impossible shall be suspended.
Where a malfunction of the simulation tool occurs at a step in the manufacturing chain of heavy buses prior to the complete or completed manufacturing steps, the obligation under Article 9(1) to operate the simulation tool at the subsequent manufacturing steps shall be postponed for a maximum of 14 calendar days after the date on which the manufacturer at the previous step made the vehicle information file available to the manufacturer of the complete or completed step.