Art. 17 Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articl…

Expression of migration test results

In forcesince 16 Mar 2025cited 7×
1.

To check the compliance, the specific migration values shall be expressed in mg/kg applying the real surface to volume ratio in actual or foreseen use.

2.

By derogation from paragraph 1, a surface to volume ratio equal or higher than 6 dm2 per kg of food may be applied for the following materials and articles:

(a)

containers and other articles, containing or intended to contain a volume of less than 500 ml or more than 10 litres;

(b)

a material or article for which, due to its form, it is impracticable to estimate the relationship between its surface area and the quantity of food in contact therewith;

(c)

sheets and films that are not yet in contact with food;

(d)

for sheets and films containing a volume less than 500 ml, or more than 10 litres.

This paragraph does not apply to plastic materials and articles intended to be brought into contact with or already in contact with food for infants and young children, as defined by Regulation (EU) No 609/2013 of the European Parliament and of the Council [Regulation (EU) No 609/2013 of the European Parliament and of the Council of 12 June 2013 on food intended for infants and young children, food for special medical purposes, and total diet replacement for weight control and repealing Council Directive 92/52/EEC, Commission Directives 96/8/EC, 1999/21/EC, 2006/125/EC and 2006/141/EC, Directive 2009/39/EC of the European Parliament and of the Council and Commission Regulations (EC) No 41/2009 and (EC) No 953/2009 (OJ L 181, 29.6.2013, p. 35, ELI: http://data.europa.eu/eli/reg/2013/609/oj).].

3.

By derogation from paragraph 1, for caps, gaskets, stoppers and similar sealing articles the specific migration value shall be expressed in:

(a)

mg/kg using the actual content of the container for which the closure is intended applying the total contact surface of sealing article and sealed container if the intended use of the article is known, while taking into account the provisions of paragraph 2;

(b)

mg/article if the intended use of the article is unknown.

4.

For caps, gaskets, stoppers and similar sealing articles the overall migration value shall be expressed in:

(a)

mg/dm2 applying the total contact surface of sealing article and sealed container if the intended use of the article is known;

(b)

mg/article if the intended use of the article is unknown.