For the verification of compliance with the requirements of this Regulation, appropriate test methods shall be selected in accordance with Article 34 of Regulation (EU) 2017/625 of the European Parliament and of the Council [Regulation (EU) 2017/625 of the European Parliament and of the Council of 15 March 2017 on official controls and other official activities performed to ensure the application of food and feed law, rules on animal health and welfare, plant health and plant protection products (OJ L 95, 7.4.2017, p. 1, ELI: http://data.europa.eu/eli/reg/2017/625/oj).].
For the selection of methods used to verify that a food contact material or article does not contain residual BPA, another hazardous bisphenol or a hazardous bisphenol derivative, or does not release those substances into food above the specified detection limit or specific migration limit, the following additional rules apply:
where the European Union Reference Laboratory (‘EURL’) for food contact materials has developed or recommended a method, that method shall be used;
a method shall have a detection limit of 1 μg/kg unless a different detection limit is set out in Annex II, or as part of the method recommended in accordance with point (a);
to verify that a food contact material or article does not contain residual BPA, another hazardous bisphenol or a hazardous bisphenol derivative, an extraction method shall be used.
The EURL for food contact materials shall consult the national reference laboratories and relevant stakeholders to identify possible methods for the purpose of paragraph 2. In case it concludes that a suitable method does not exist at Union level for a specific verification purpose forthcoming from paragraph 2, it shall complete the development of such a method within a date agreed with the Commission.
The following rules shall apply for the purposes of verification with specific detection or migration limits:
test results shall be expressed in accordance with the rules laid down in Article 17 of Regulation (EU) No 10/2011;
compliance with a migration limit shall be established in accordance with Article 18, Annex III and Chapters 1 and 2 of Annex V to Regulation (EU) No 10/2011;
in case the foreseeable contact occurs under continuous flow conditions, such as in pipes or filtration assemblies, the testing time shall equal the average residence time of the food in that pipe or filtration assembly.