Art. 16 Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articl…

Supporting documents

In forcesince 16 Mar 2025cited 11×
1.

Appropriate documentation to demonstrate that the materials and articles, products from intermediate stages of their manufacturing as well as the substances intended for the manufacturing of those materials and articles comply with the requirements of this Regulation shall be made available by the business operator to the national competent authorities on request.

For substances used in the manufacture of plastic materials and articles, documentation on the composition shall be made available to the competent authorities on request, together with any documentation regarding their degree of purity.

2.

That documentation shall contain the conditions and results of testing, calculations, including modelling, other analysis, and evidence on the safety or reasoning demonstrating compliance. Rules for experimental demonstration of compliance are set out in Chapter V.

3.

Manufacturers of plastic materials and articles, and of products from intermediate stages of their manufacturing, shall ensure that documentation showing compliance with paragraphs 1 to 2 of Article 8 is part of the documentation referred to in paragraph 1.

4.

Manufacturers of plastic materials and articles, and of products from intermediate stages of their manufacturing, shall ensure that competent authorities can take samples during the carrying out of official controls to verify their degree of purity and their composition, including that of the substances and materials used for their manufacture.

The 10 that are cited most themselves, of 11.