ANNEX VIII, Regulation (EU) 2017/656

In forcesince 19 Dec 2016

The IMI system shall allow for the exchange of at least the following data between approval authorities; the structure and numbering of the data shall be respected.

1.

Make(s) (trade name(s) of manufacturer): …

2.

Commercial name(s) (if applicable): …

3.

Company name of manufacturer: …

3.1.

Postal address / Street and number of manufacturer: …

3.1.1.

Postal code: …

3.1.2.

Country / Region: …

4.

Name of manufacturer's authorised representative (if any): …

4.1.

Postal address / Street and number of manufacturer's authorised representative: …

4.1.1.

Postal code: …

4.1.2.

Country / Region: …

5.

Name(s) of assembly/manufacture plant(s): …

5.1.

Postal address (es) / Street(s) and number(s) of assembly/manufacture plant(s): …

5.1.1.

Postal code(s): …

5.1.2.

Country (ies) / Region(s): …

6.

Engine type designation/engine family designation /FT (1) (2): …

7.

Category and sub-category of the engine type/engine family (1) (3): …

7.1.

Engine identification number of tested engine (4): …

8.

EU type-approval: granted/extended/revised/refused/ withdrawn (1) (5)

8.1.

Date of granting/extending/revising/refusing/withdrawing (1) the EU type-approval (5)

9.

Number of the EU type-approval (except if refused) (5): …

10.

Emissions stage: V/ SPE (1) (5)

11.

Exemption for new technologies or new concepts in accordance with Article 35 of Regulation (EU) 2016/1628 (5) (6)

11.1

Validity of the approval limited to dd/mm/yyyy (5) (6)

11.2.

Restrictions to validity (5) (6): …

11.3.

Exemptions applied (5) (6): …

12.1

Cycle emissions results

Emissions | CO (g/kWh) | HC (g/kWh) | NOx (g/kWh) | HC+NOx (g/kWh) | PM (g/kWh) | PN #/kWh | Test Cycle

NRSC final result with DF | | | | | | |

NRTC Final test result with DF | | | | | | |

12.2

CO2 result: …

(1)

Strike out the unused options, or only show the used option(s).

(2)

Indicate the engine type designation /engine family designation in accordance with entries 1.6 and 3.1.1 of the information document set out in Appendix 3 to Annex I.

(3)

Indicate the applicable option for the category and sub-category in accordance with entry 1.7 of the information document set out in Part A of Appendix 3 to Annex I.

(4)

Indicate the information from entry 2.2 of Appendix 1 to Annex VI (test report).

(5)

Indicate the applicable value of the EU type-approval certificate as set out in Annex IV.

(6)

State this entry only for EU type-approvals of an engine type or an engine family as an exemption for new technologies or new concepts, pursuant to Article 35 of Regulation (EU) 2016/1628.

(7)

Indicate the information from section 11 of Appendix 1 to Annex VI (test report).