Identification of approval authority
Communication concerning the:
EU type-approval (1)
extension of EU type-approval (1)
refusal of EU type-approval (1)
withdrawal of EU type-approval (1)
of an engine type/ engine family (1)
with regard to gaseous and particulate pollutant emission pursuant to Regulation (EU) 2016/1628, as last amended by (Commission Delegated) (1) Regulation …/… (1) (2) (of the European Parliament and of the Council) (1)
EU type-approval number (3): …
Reason for extension/refusal/withdrawal (1): …
1.1. Make (trade name(s) of manufacturer): …
1.2. Commercial name(s) (if applicable): …
1.3. Company name and address of manufacturer: …
1.4. Name and address of manufacturer's authorised representative (if any): …
1.5. Name(s) and address(es) of assembly/manufacture plant(s): …
1.6. Engine type designation/engine family designation/FT (1): …
1.7. Category and sub-category of the engine type/engine family (1) (4): …
1.8. Emissions durability period category: Not Applicable/Cat 1/Cat 2/Cat 3 (1)
1.9. Emissions stage: V/ SPE
1.10. Engine for snow throwers (5): Yes/No (1)
Technical service responsible for carrying out the test(s): …
Date(s) of the test report(s): …
Number(s) of the test report(s): …
The undersigned hereby certifies the accuracy of the manufacturer's description in the attached information document of the engine type/engine family (1) described above, for which one or more representative samples, selected by the approval authority, have been submitted as prototypes and that the attached test results apply to the engine type/engine family (1).
The engine type/engine family (1) meets/does not meet (1) the requirements laid down in Regulation (EU) 2016/1628.
The approval is granted/extended/refused/withdrawn (1)
The approval is granted in accordance with Article 35 of Regulation (EU) 2016/1628 and the validity of the approval is thus limited to dd/mm/yyyy (3)
Restrictions to validity (3) (6): …
Exemptions applied (3) (6): …
Place: …
Date: …
Name and signature (or visual representation of an ‘advanced electronic signature’ according to Regulation (EU) No 910/2014, including data for verification): …
Attachments:
Information package
Test report(s)
Where applicable, the name(s) and specimen(s) of the signature(s) of the person(s) authorised to sign statement of conformity and a statement of their position in the company
Where applicable, a completed specimen of a statement of conformity
If this model is used for EU type-approval of an engine as an exemption for new technologies or new concepts, pursuant to Article 35(4) of Regulation (EU) 2016/1628, the heading of the certificate shall read ‘PROVISIONAL EU TYPE-APPROVAL CERTIFICATE VALID ONLY ON THE TERRITORY OF … (7)’.
EU type-approval number: …
2.1.
Combustion Cycle: four stroke cycle/two stroke cycle/rotary/other: … (describe) (1)
2.2.
Ignition Type: Compression ignition/spark ignition (1)
2.3.1.
Position of the cylinders in the block: V/in-line/radial/other(describe) (1)
2.6
Main Cooling medium: Air/Water/Oil (1)
2.7.
Method of air aspiration: naturally aspirated/pressure charged/pressure charged with charge cooler (1)
2.8.1.
Fuel Type(s): Diesel (non-road gas-oil)/Ethanol for dedicated compression ignition engines (ED95)/Petrol (E10)/Ethanol (E85)/(Natural gas/Biomethane)/Liquid Petroleum Gas (LPG) (1)
2.8.1.1.
Sub Fuel type (Natural gas/Biomethane only): Universal fuel — high calorific fuel (H-gas) and low calorific fuel (L-gas)/Restricted fuel — high calorific fuel (H-gas)/Restricted fuel — low calorific fuel (L-gas)/Fuel specific (LNG);
2.8.2.
Fuelling arrangement: Liquid-fuel only/Gaseous-fuel only/Dual-fuel type 1A/Dual-fuel type 1B/Dual-fuel type 2A/Dual-fuel type 2B/Dual-fuel type 3B (1)
2.8.3.
List of additional fuels compatible with use by the engine declared by the manufacturer in accordance with point 1 of Annex I to Delegated Regulation (EU) 2017/654 (provide reference to recognised standard or specification): …
2.8.4.
Lubricant added to fuel: Yes/No (1)
2.8.5.
Fuel supply type: Pump (high pressure) line and injector/in-line pump or distributor pump/Unit injector/Common rail/Carburettor)/port injector/direct injector/Mixing unit/other(specify) (1)
2.9.
Engine management systems: mechanical/electronic control strategy (1)
2.10.1.
Exhaust gas recirculation (EGR): Yes/No (1)
2.10.2.
Water injection: Yes/No (1)
2.10.3.
Air injection: Yes/No (1)
2.10.4.
Others (specify): …
2.11.1.
Oxidation catalyst: Yes/No (1)
2.11.2.
DeNOx system with selective reduction of NOx (addition of reducing agent): Yes/No (1)
2.11.3.
Other DeNOx systems: Yes/No (1)
2.11.4.
Three-way catalyst combining oxidation and NOx reduction: Yes/No (1)
2.11.5.
Particulate after-treatment system with passive regeneration: Yes/No (1)
2.11.6.
Particulate after-treatment system with active regeneration: Yes/No (1)
2.11.7.
Other particulate after-treatment systems: Yes/No (1)
2.11.8.
Other after-treatment devices (specify): …
2.11.9.
Other devices or features that have a strong influence on emissions (specify): …
Item Number | Item Description | Parent Engine / Engine type | Engine types within the family (if applicable)
3.1.1. | Engine Type Designation: | | | |
3.1.2. | Engine type designation shown on engine mark: Yes/No (1) | | | |
3.1.3. | Location of the manufacturer's statutory marking: | | | |
3.2.1. | Declared rated speed (rpm): | | | |
3.2.1.2. | Declared rated net Power (kW): | | | |
3.2.2. | Maximum power speed (rpm): | | | |
3.2.2.2. | Maximum net power (kW): | | | |
3.2.3. | Declared maximum torque speed (rpm): | | | |
3.2.3.2. | Declared maximum torque (Nm): | | | |
3.6.3. | Number of Cylinders: | | | |
3.6.4. | Engine total swept volume (cm3): | | | |
3.8.5. | Device for recycling crankcase gases: Yes/No (1) | | | |
3.11.3.12. | Consumable reagent: Yes/No (1) | | | |
3.11.3.12.1. | Type and concentration of reagent needed for catalytic action: | | | |
3.11.3.13. | NOx sensor(s): Yes/No (1) | | | |
3.11.3.14. | Oxygen sensor: Yes/No (1) | | | |
3.11.4.7. | Fuel borne catalyst (FBC): Yes/No (1) | | | |
Particular conditions to be respected in the installation of the engine on non-road mobile machinery:
3.8.1.1. | Maximum allowable intake depression at 100 % engine speed and at 100 % load (kPa) with clean air cleaner: | | | |
3.8.3.2. | Maximum charge air cooler outlet temperature at 100 % speed and 100 % load (deg. C): | | | |
3.8.3.3. | Maximum allowable pressure drop across charge cooler at 100 % engine speed and at 100 % load (kPa) (if applicable): | | | |
3.9.3. | Maximum permissible exhaust gas back-pressure at 100 % engine speed and at 100 % load (kPa): | | | |
3.9.3.1. | Location of measurement: | | | |
3.11.1.2 | Maximum temperature drop from exhaust system or turbine outlet to first exhaust after-treatment system (deg. C) if stated: | | | |
3.11.1.2.1. | Test conditions for measurement: | | | |
3.8.
Manufacturer intends to use ECU torque signal for in-service monitoring: Yes/No (1)
3.8.1.
Dynamometer torque greater than or equal to 0,93 × ECU torque: Yes/No (1)
3.8.2.
ECU torque correction factor in case that dynamometer torque less than 0,93 × ECU torque:
Emissions | CO (g/kWh) | HC (g/kWh) | NOx (g/kWh) | HC+NOx (g/kWh) | PM (g/kWh) | PN #/kWh | Test Cycle (8)
NRSC final result with DF. | | | | | | |
NRTC Final test result with DF | | | | | | |
11.2
CO2 result:
11.3.1. Reference work (kWh): …
11.3.2. Reference CO2 mass (g): …
Strike out the unused options, or only show the used option(s).
Indicate only the latest amendment in case of an amendment of one or more Articles of Regulation (EU) 2016/1628, according to the amendment applied for the EU type-approval.
Delete this entry when not applicable.
Indicate the applicable option for the category and sub-category in accordance with entry 1.7 of the information document set out in Part A of Appendix 3 to Annex I.
Indicate whether the approval is for a NRS (< 19 kW) engine family consisting exclusively of engine types for snow throwers.
Applicable only for EU type-approval of an engine type or an engine family as an exemption for new technologies or new concepts, pursuant to Article 35 of Regulation (EU) 2016/1628.
Indicate the Member State.
Indicate the test cycle in accordance with the fifth column of the Tables set out in Annex IV to Regulation (EU) 2016/1628.
Only applicable to engines of sub-categories NRE-v-5 and NRE-v-6 tested on NRTC.